Skip to the content
2 layers87.5 × 77 mmProject7, the printed circuit board in 3D
Size
87.5 × 77 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
63
Pads
138
Tracks, vias
181, 9
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Jul 2026
Updated
5 Jul 2026

Overview

Project7 is an open-source printed circuit board by Sarav016, from the Sarav016/Smart-Environmental-Monitoring-PCB-using-ESP32 repository on GitHub. It is a 2-layer board of 87.5 × 77 mm with 17 parts on 63 nets, routed with 181 tracks and 9 vias.

It is built around the TSL25911FN, AM2302 and AMS1117-3.3. Its parts include 5 ICs, 1 diode, 1 connector and 1 switch.

Main components

3

README

README.md

Smart-Environmental-Monitoring-PCB-using-ESP32

Parts

17
QtyValueFootprintReferences
4CCapacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal10microF1, 10microF2, 100nanoF1, 100nanoF2
4RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical1.2ohm1, 1MegaOHM1, 4.7kohm1, 330ohm1
1AM2302Sensor:ASAIR_AM2302_P2.54mm_VerticalT&Hsensor1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1CP2102N-Axx-xQFN28Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mmU5
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU3
1LEDLED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z6.0mmD1
1SW_PushButton_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H5.0_APEM_MJTP1250SW1
1TSL25911FNOptoDevice:AMS_TSL25911FNU6
1USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_JAE_DX07S024WJ1R350P1
1~ESP32 DEVKIT footprint lib:esp32 devkit footprintU1

Similar boards

  • 2 layersPriject 2 ESP32 build, the printed circuit board in 3D

    Priject 2 ESP32 build

    Aanuoluwap/555blinker

    This repository contains electronics design projects created using KiCad.

    12 parts1MIT
  • 4 layers79.9 × 84.7 mmUTS PCB Dewi, the printed circuit board in 3D

    UTS PCB Dewi

    astarsD130/UTS-matkul-pcb

    55 parts
  • 2 layersAirquality sensor, the printed circuit board in 3D

    Airquality sensor

    frodegill/airsensor

    PCB and Arduino code for custom air quality sensor

    22 partsGPL-3.0
  • 2 layers52 × 54 mmSensorNodePCB, the printed circuit board in 3D

    SensorNodePCB

    Vinay-Kumbar/SensorNode-PCB-Design

    PCB design for a multi-sensor node (ESP32, DHT22, vibration sensor) built in KiCad — schematic, layout, and manufacturing files

    8 parts
  • 2 layers52 × 56.6 mmMuMo v2-Node, the printed circuit board in 3D

    MuMo v2-Node

    Strooom/MuMo-V2-Node-PCB

    PCB design for the Museum Monitor V2

    79 parts17
  • 4 layers52.5 × 59.7 mmESPHome Indoor Multi Sensor, the printed circuit board in 3D

    ESPHome Indoor Multi Sensor

    mikelawrence/esphome-indoor-multi-sensor-hardware

    ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

    113 parts14CERN-OHL-P-2.0
  • 2 layers40 × 22.1 mmKaze, the printed circuit board in 3D

    Kaze

    Las-Vejas/Kaze

    A very powerful surrounding sensor

    44 parts3MIT
  • 2 layers100 × 69 mmLight intensity data logger, the printed circuit board in 3D

    Light intensity data logger

    Llamero/Light_Color_and_Intensity_Datalogger

    Measures temperature, pressure, humidity, intensity and color of light and saves it to an SD card

    27 parts2Apache-2.0

Questions

How big is the Project7 PCB?

It measures 87.5 × 77 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Project7 use?

17 parts, built around the TSL25911FN, AM2302 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Project7 KiCad files?

From the Sarav016/Smart-Environmental-Monitoring-PCB-using-ESP32 repository on GitHub, at the commit this page was made from: the board is project7.kicad_pcb and its schematic project7.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Project7 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sarav016 before reusing the design.