Skip to the content

Wi-Fi

106 boards

KiCad boards from 59 GitHub repositories tagged “wifi”, the most starred first; open any of them in PCBKit.

  • 4 layers255.9 × 224.5 mmCentral control unit, the printed circuit board in 3D

    Central control unit

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    1,880 parts1
  • 2 layers50 × 48 mmDled esp32-controller, the printed circuit board in 3D

    Dled esp32-controller

    CalinRadoni/pax-DLED

    Efficiency, hardware control for digital LEDs and Wi-Fi communications - these are just some of the caracteristics of this controller.

    40 partsGPL-3.0
  • 2 layers99 × 93.5 mmEsp32-rfm gateway, the printed circuit board in 3D

    Esp32-rfm gateway

    CalinRadoni/pax-Gateway

    The purpose of this gateway is to either:

    91 partsGPL-3.0
  • 4 layers100 × 50 mmPcm5102a mux board, the printed circuit board in 3D

    Pcm5102a mux board

    cbaurtx/RetroBox

    RetroBox is an internet radio using an ESP32-S3 system on a chip

    86 parts
  • 2 layers100 × 100 mmG7 Senior Design V2, the printed circuit board in 3D

    G7 Senior Design V2

    Fugate-A/ChairGuru

    ChairGuru - A project mainly designed for classroom teachers but has applications in all areas concerning chair management! We have designed a chair system that allows an end-user to create a layout from their computer…

    53 parts
  • 2 layers96 × 70 mmHXTX XS WEAR 底板 4.0 v125 2026-01-09-12-46, the printed circuit board in 3D

    HXTX XS WEAR 底板 4.0 v125 2026-01-09-12-46

    HuaqiuOpenHardware/xinghongpai-nearlink-dev-board

    Xinghongpai WS63V100/Hi3863 NearLink (SLE) open-source development board with KiCad schematic/PCB, BOM and OpenHarmony examples. 星鸿派星闪开发板。

    57 parts
  • 6 layers99.7 × 63.9 mmNescart, the printed circuit board in 3D

    Nescart

    Keitark/fc-rom-vomitter

    Wi-Fi NROM development cartridge for Famicom: ESP32-S3, SRAM, KiCad, firmware, fabrication evidence, and an experimental NES variant.

    84 partsMIT
  • 4 layers32 × 46 mmFalcon core, the printed circuit board in 3D

    Falcon core

    PHS-SMCS/falcon-core

    Lightest ESP32-based blimp controller with the works; 9-DoF, ToF altimetry, motor drivers, and Wi-Fi enabled camera streaming, all on a single 300mAh LiPo. >1hr of battery life.

    94 partsAGPL-3.0
  • 2 layers160 × 100.3 mmButler, the printed circuit board in 3D

    Butler

    poultry-butler/hardware

    poultry butler hardware implementation

    58 partsApache-2.0
  • 4 layers46 × 44 mmLED Bar Controller, the printed circuit board in 3D

    LED Bar Controller

    Qeteshpony/LED-Bar-Controller

    Small controller for 2-color LED Bars

    43 partsBSD-2-Clause
  • 2 layers67.3 × 85.7 mmAutologger, the printed circuit board in 3D

    Autologger

    serhaturtis/ES-Autologger

    A data logger board for an automotive application

    78 parts
  • 2 layers66.4 × 48.1 mmClean, the printed circuit board in 3D

    Clean

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    26 parts456
  • 2 layers66.4 × 24.5 mmConnecting piece, the printed circuit board in 3D

    Connecting piece

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    22 parts456
  • 2 layers66.4 × 48.1 mmESP32, the printed circuit board in 3D

    ESP32

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    78 parts456
  • 2 layers66.4 × 48.1 mmRaspberry, the printed circuit board in 3D

    Raspberry

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    40 parts456
  • 2 layersHuzzah cc112x shield, the printed circuit board in 3D

    Huzzah cc112x shield

    rfquack/RFQuack

    RFQuack: the versatile RF-analysis tool that quacks!

    6 parts348GPL-2.0
  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    158 parts157GPL-3.0
  • 2 layers192.4 × 50 mmRemote, the printed circuit board in 3D

    Remote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    139 parts157GPL-3.0
  • 2 layers8 × 10 mmHomingSensor REV 01, the printed circuit board in 3D

    HomingSensor REV 01

    stanleyondrus/LaserProjectorV2

    LaserProjector V2 is a battery-powered, ESP32-based laser XY scanner using stepper motors to deflect the beam. It has auto-homing functionality, and can be controlled wirelessly (Wi-Fi & Bluetooth).

    5 parts125
  • 2 layers59.5 × 34.3 mmETH W5500, the printed circuit board in 3D

    ETH W5500

    the78mole/km271-wifi

    A piece of hardware to be installed in a Buderus Logamatic 2107 to provide control and status over WiFi

    69 parts44
  • 2 layers47.2 × 55.5 mmInki, the printed circuit board in 3D

    Inki

    c0de111/tinta

    Battery-powered e-paper sign: room signage, sensor graphs, home automation, or anything over Wi-Fi. Wakes by real-time clock, NFC tap, or button. Raspberry Pi Pico W firmware, custom PCB, and 3D-printed case included.

    54 parts39Apache-2.0
  • 2 layers50 × 80 mmHelgatchi back PCB, the printed circuit board in 3D

    Helgatchi back PCB

    Pips801/Helgatchi

    Handheld BLE/WiFi detector and foxhunter

    20 parts15
  • 2 layers175 × 117.7 mmLaser Controller, the printed circuit board in 3D

    Laser Controller

    Andre1Becker/GalvOS

    Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors

    99 parts11GPL-3.0
  • 2 layersWifiLedButton, the printed circuit board in 3D

    WifiLedButton

    thorsten-l/ESP8266-WiFi-Doorbell-Gateway

    A gateway for your doorbell button ;-)

    5 parts10Apache-2.0