2 layers47 × 49.5 mm
2 layers160 × 100.3 mm
Butler
poultry-butler/hardwarepoultry butler hardware implementation
- Size
- 160 × 100.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 42
- Pads
- 166
- Tracks, vias
- 434, 16
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 15 Dec 2016
- Updated
- 5 Mar 2017
Overview
Butler is an open-source printed circuit board by poultry-butler, from the poultry-butler/hardware repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 160 × 100.3 mm with 58 parts on 42 nets, routed with 434 tracks and 16 vias.
It is built around the BAT54S and BZX84J-B5V1. Its parts include 23 resistors, 21 connectors, 4 capacitors, 4 transistors and 3 ICs. It belongs with the radio and wireless and sensors and measurement boards and the ESP8266 boards of this library.
Main components
2README
butler/version-0.2-prototyping-pcb/README.mdPrototyping Board
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100k | Resistors_SMD:R_0805_HandSoldering | R4, R5, R10, R11, R12, R22, R23 |
| 5 | 10k | Resistors_SMD:R_0805_HandSoldering | R14, R16, R17, R19, R20 |
| 4 | 1k | Resistors_SMD:R_0805_HandSoldering | R13, R15, R18, R21 |
| 4 | 1µ | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4 |
| 4 | CONN_01X01 | Mounting_Holes:MountingHole_3.2mm_M3_Pad | J1, J2, J3, J4 |
| 4 | GND | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J13, J13, J13, J16 |
| 4 | P/N_MOS | TO_SOT_Packages_SMD:SOT-363_SC-70-6_Handsoldering | Q1, Q2, Q3, Q4 |
| 3 | 100 | Resistors_SMD:R_1206_HandSoldering | R7, R8, R9 |
| 3 | 33 | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3 |
| 2 | BAT54S | TO_SOT_Packages_SMD:SOT-23 | D1, D2 |
| 2 | SW_V+ | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J14, J14 |
| 1 | 1W | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J17 |
| 1 | 220k | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | BATT+ | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J9 |
| 1 | BATT- | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J8 |
| 1 | BZX84J-B5V1 | Diodes_SMD:D_SOD-323_HandSoldering | D3 |
| 1 | MOT_A | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J6 |
| 1 | MOT_B | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J5 |
| 1 | N9505 | n9505-step-down:n9595 | U2 |
| 1 | SCL | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J19 |
| 1 | SDA | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J18 |
| 1 | SER_3V3 | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J15 |
| 1 | SWITCH_A | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J11 |
| 1 | SWITCH_B | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J12 |
| 1 | TX | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J10 |
| 1 | VHN5180A-E | power-sso-36-tp:PowerSOIC-36 | U3 |
| 1 | WeMos_mini | wemos-d1-mini:wemos-d1-mini-with-pin-header-and-connector | U1 |
More from poultry-butler/hardware
1Similar boards
- 2 layers58.2 × 38.1 mm
Usb sniffer
ataradov/usb-sniffer
Low-cost LS/FS/HS USB sniffer with Wireshark interface
87 parts1.3kBSD-3-Clause - 4 layers94.4 × 72.8 mm
RP2040 base
Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
325 parts419 - 4 layers72.4 × 95.3 mm
DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers100 × 99.8 mm
- 6 layers203 × 151.8 mm
PDNode Baseboard
DvidMakesThings/HW_PDNode-600-Pro
The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.
236 parts86AGPL-3.0 - 6 layers71.5 × 63.6 mm
Sensorboard
CameraNexus/sitina1
Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…
426 parts82MIT - 2 layers248.9 × 120.7 mm
16nx
16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.
171 parts76 - 4 layers137 × 79.5 mm
Questions
How big is the Butler PCB?
It measures 160 × 100.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Butler use?
58 parts, built around the BAT54S and BZX84J-B5V1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Butler KiCad files?
From the poultry-butler/hardware repository on GitHub, at the commit this page was made from: the board is butler/version-0.2-prototyping-pcb/butler.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Butler design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).