
Zone controller
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

PCB for underfloor heating system
Central control unit is an open-source printed circuit board by RomLab, from the RomLab/pcb-system-for-underfloor-heating-v2.0 repository on GitHub. It is a 4-layer board of 255.9 × 224.5 mm with 1,880 parts on 613 nets, routed with 8,180 tracks and 0 vias.
It is built around the TXS0108EPW, TPS7B87-Q1DDA and MCP23S17-E/SO, with the PCA9615DP, PMV213SN,215-VB and STPS160A among its other parts. Its parts include 275 resistors, 164 connectors, 99 diodes, 89 capacitors and 74 transistors. It belongs with the radio and wireless and interfaces and adapters boards and the ESP32 boards of this library.
There are here schematics, PCBs, 3D views and Gerber data for devices in underfloor heating system. There are two types folders with version KiCAD 5 and KiCAD 7. The libraries are here.
More information at https://github.com/RomLab/system-for-underfloor-heating-v2.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1113 | ~ | via_pad_rl:via_pad_0.4x0.8mm | ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~ +1097 |
| 69 | 10k | resistor_smd_rl:r_1206 | R118, R119, R120, R124, R125, R126, R149, R150, R151, R152, R153, R154, R155, R156, R157, R158 +53 |
| 69 | 1x2_pin_header | connector_smd_pinheader_2.54mm_rl:1x2_pinheader_2.54mm_vertical | P25, P27, P29, P31, P32, P33, P34, P35, P36, P37, P38, P39, P40, P41, P42, P100 +53 |
| 55 | 10R/0.5W | resistor_smd_rl:r_1206 | R130, R131, R132, R162, R163, R164, R165, R166, R167, R168, R169, R170, R171, R172, R173, R174 +39 |
| 44 | 100nF | capacitor_smd_rl:c_1206 | C1, C2, C3, C4, C10, C11, C12, C25, C30, C32, C33, C34, C38, C40, C42, C44 +28 |
| 39 | PMV213SN,215 | package_sot_rl:sot_23 | Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q21, Q22, Q29, Q30, Q31, Q32, Q33, Q34, Q39 +23 |
| 35 | 1x3_pin_header | connector_smd_pinheader_2.54mm_rl:1x3_pinheader_2.54mm_vertical | P1, P10, P11, P12, P101, P102, P103, P104, P105, P106, P107, P108, P109, P110, P111, P112 +19 |
| 30 | mounting_hole_pad_3.2x6mm | mounting_hole_pad_rl:mounting_hole_pad_3.2x6mm | ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~, ~ +14 |
| 26 | SD05-7 | package_sod_rl:sod_323 | D30, D31, D32, D51, D52, D53, D54, D55, D60, D61, D70, D71, D72, D73, D100, D101 +10 |
| 24 | 1k | resistor_smd_rl:r_1206 | R101, R112, R114, R116, R117, R121, R122, R123, R145, R146, R147, R148, R209, R210, R211, R212 +8 |
| 23 | 1uF | capacitor_smd_rl:c_1206 | C29, C35, C36, C37, C39, C41, C43, C46, C49, C50, C51, C56, C57, C58, C59, C64 +7 |
| 20 | 1x4_idc_lsa | connector_rl:1x4_idc_lsa_connector_general | J17, J18, J19, J20, J24, J27, J28, J29, J30, J31, J32, J33, J34, J38, J39, J40 +4 |
| 16 | TLP2345 | package_so_rl:so_6 | U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U27, U28, U29, U30, U31, U32 |
| 15 | 100k | resistor_smd_rl:r_1206 | R24, R25, R26, R27, R40, R41, R42, R43, R44, R45, R46, R47, R59, R65, R66 |
| 15 | 1x2_screw_term_block | terminal_block_tht_rl:EBBA-02-C-SS-BU | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J13, J14, J15, J16 |
| 12 | 100uF | elec_capacitor_smd_rl:elec_c_8x10.5 | C5, C6, C7, C8, C17, C18, C19, C20, C26, C31, C88, C89 |
| 12 | STPS160A | diode_smd_rl:sma | D17, D18, D23, D24, D25, D26, D37, D38, D39, D40, D58, D59 |
| 11 | BXT600P03M | package_sot_rl:sot_23 | Q58, Q59, Q60, Q61, Q62, Q63, Q64, Q65, Q66, Q67, Q68 |
| 10 | 10R | resistor_smd_rl:r_1206 | R1, R2, R3, R4, R32, R33, R34, R35, R54, R61 |
| 10 | 1k8/0.5W | resistor_smd_rl:r_1206 | R96, R97, R106, R107, R109, R110, R137, R138, R139, R140 |
| 10 | 54601-908WPLF | connector_rl:rj45_54601-908WPLF | J21, J22, J23, J25, J26, J35, J36, J37, J43, J44 |
| 10 | 576R | resistor_smd_rl:r_1206 | R94, R95, R102, R103, R104, R105, R133, R134, R135, R136 |
| 10 | AOB1608L | package_to_rl:to_263_2 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q19, Q20 |
| 10 | AOD458 | package_to_rl:to_252_2 | Q23, Q24, Q25, Q26, Q27, Q28, Q35, Q36, Q37, Q38 |
| 10 | DS9503_us | package_tsoc_rl:tsoc_6 | D41, D42, D43, D44, D45, D56, D62, D63, D64, D65 |
| 10 | LL-504PGC1E-G5-2B | led_tht_rl:led_d5mm_2.54mm | D15, D16, D19, D20, D21, D22, D33, D34, D35, D36 |
| 10 | NC (100R) | resistor_smd_rl:r_1206 | R266, R267, R268, R269, R270, R271, R272, R273, R274, R275 |
| 10 | NC (10k) | resistor_smd_rl:r_1206 | R98, R100, R108, R111, R113, R115, R141, R142, R143, R144 |
| 10 | SMDA05CDR2G | package_soic_rl:soic_8_3.9mmx4.9mm | D74, D75, D76, D77, D78, D79, D80, D81, D82, D83 |
| 10 | UCLAMP0501H.TCT | package_sod_rl:sod_523 | D46, D47, D48, D49, D50, D57, D66, D67, D68, D69 |
| 9 | 4k7 | resistor_smd_rl:r_1206 | R127, R128, R129, R254, R255, R256, R257, R258, R259 |
| 9 | PMEG40T30EPX | package_sod_rl:sod_128 | D27, D28, D29, D90, D91, D92, D93, D94, D95 |
| 7 | LL-503VC1E-4C | led_tht_rl:led_d5mm_2.54mm | D5, D6, D7, D8, D11, D12, D14 |
| 6 | 1k15 | resistor_smd_rl:r_1206 | R203, R204, R205, R206, R207, R208 |
| 6 | 1x3_screw_term_block | terminal_block_tht_rl:EBBA-03-C-SS-BU | J47, J48, J49, J50, J51, J52 |
| 5 | LTC4231_MSOP | package_msop_rl:msop_12 | U1, U2, U3, U4, U7 |
| 4 | 10uF | capacitor_smd_rl:c_1206 | C21, C22, C23, C24 |
| 4 | 2.2nF | capacitor_smd_rl:c_1206 | C13, C14, C15, C28 |
| 4 | 210R | resistor_smd_rl:r_1206 | R233, R237, R238, R242 |
| 4 | 390R | resistor_smd_rl:r_1206 | R234, R236, R239, R241 |
| 4 | 825k | resistor_smd_rl:r_1206 | R9, R14, R19, R55 |
| 3 | 12k1 | resistor_smd_rl:r_1206 | R10, R15, R20 |
| 3 | 13k7 | resistor_smd_rl:r_1206 | R12, R17, R22 |
| 3 | 150k | resistor_smd_rl:r_1206 | R13, R18, R23 |
| 3 | 330R | resistor_smd_rl:r_1206 | R49, R50, R51 |
| 3 | 47m | resistor_smd_rl:r_1206 | R28, R30, R60 |
| 3 | 4k12 | resistor_smd_rl:r_1206 | R11, R16, R21 |
| 3 | SMCJ5.0CA-13-F | diode_smd_rl:smc | D2, D3, D4 |
| 3 | SN74HCS4075-Q1 | package_tssop_rl:tssop_14 | U9, U10, U11 |
| 3 | TXS0108E | package_tssop_rl:tssop_20 | U23, U24, U26 |
| 2 | 100R/120R | resistor_smd_rl:r_1206 | R235, R240 |
| 2 | 10k | trimmer_tht_rl:trimmer_t910y | R229, R231 |
| 2 | 150R | resistor_smd_rl:r_1206 | R52, R53 |
| 2 | 1x2_pin_header | connector_molex_rl:molex_kk_254_1x02_2.54mm_22112022_vertical | P28, P30 |
| 2 | 2x10_pin_header | connector_smd_pinheader_2.54mm_rl:2x10_pinheader_2.54mm_vertical | P45, P46 |
| 2 | STPS1L30U | diode_smd_rl:sma | D9, D10 |
| 2 | TPS7B87-Q1 | package_to_rl:to_252_5 | U5, U6 |
| 2 | YJD20N06A | package_to_rl:to_252_2 | Q56, Q57 |
| 2 | YJL2305A | package_sot_rl:sot_23 | Q17, Q18 |
| 2 | mounting_hole_pad | mounting_hole_pad_rl:mounting_hole_pad_3.2x6mm | ~, ~ |
| 1 | 100m | resistor_smd_rl:r_1206 | R31 |
| 1 | 11k | resistor_smd_rl:r_1206 | R7 |
| 1 | 15m | resistor_smd_rl:r_1206 | R29 |
| 1 | 1k02 | resistor_smd_rl:r_1206 | R48 |
| 1 | 1k6 | resistor_smd_rl:r_1206 | R56 |
| 1 | 1x20_pin_socket | connector_tht_pinsocket_2.54mm_rl:1x20_pinsocket_2.54mm_vertical_8.5mm | P4 |
| 1 | 1x4_pin_socket | connector_tht_pinsocket_2.54mm_rl:1x4_pinsocket_2.54mm_vertical_8.4mm | P26 |
| 1 | 220nF | capacitor_smd_rl:c_1206 | C27 |
| 1 | 2k21 | resistor_smd_rl:r_1206 | R67 |
| 1 | 2k74 | resistor_smd_rl:r_1206 | R57 |
| 1 | 2x20_pin_header | connector_rl:2x20_pinheader_2.54mm_rpi_rl | P116 |
| 1 | 2x20_pin_socket | raspberry_pi_rl:module_raspberry_pi_4b | P115 |
| 1 | 3.9nF | capacitor_smd_rl:c_1206 | C16 |
| 1 | 32k4 | resistor_smd_rl:r_1206 | R58 |
| 1 | 61k9 | resistor_smd_rl:r_1206 | R8 |
| 1 | 649k | resistor_smd_rl:r_1206 | R5 |
| 1 | 7k32 | resistor_smd_rl:r_1206 | R6 |
| 1 | AKZ770_3-5.08-V-GREEN | terminal_block_tht_rl:AKZ770_3-5.08-V-GREEN | J12 |
| 1 | MCP23S17 | package_spdip_rl:spdip_28 | U8 |
| 1 | PCA9615 | package_tssop_rl:tssop_10 | U25 |
The 1,877 most common of 1,880 parts.

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system

VideoGPU/FMC_MIPI
FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface



ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

ENTS-Source/formula-diode
Race each other on an LED strip, using an ESP8266

ondras12345/pm-sensor
SPS30-based PM2.5 particulate matter sensor with RS485

danieltith/Neuroscience
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".

It measures 255.9 × 224.5 mm and has 4 copper layers, 1.6 mm thick.
1,880 parts, built around the TXS0108EPW, TPS7B87-Q1DDA, MCP23S17-E/SO and PCA9615DP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RomLab/pcb-system-for-underfloor-heating-v2.0 repository on GitHub, at the commit this page was made from: the board is kicad-v5.1.6/central-control-unit/v1.0/central-control-unit/central-control-unit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RomLab before reusing the design.