Skip to the content
12345678910111213141516171819202122232425262728

MCP23S17-E/SO

Microchip TechnologyExtended

-40℃~+125℃ 1.8V~5.5V 10MHz 16 1uA 600mV 8 8mA Interrupt Output Reset function、Cascading and address extension SPI SOIC-28-300mil I/O Expanders ROHS

Part id
microchip/MCP23S17-E/SO
Category
I, O Expanders
Package
SOIC-28-300mil
Pins
28
In stock
4 at JLCPCB (C145413)
Used on
29 open-source boards

Overview

The MCP23S17-E/SO is an i, O Expander made by Microchip Technology in a SOIC-28-300mil package with 28 pins. -40℃~+125℃ 1.8V~5.5V 10MHz 16 1uA 600mV 8 8mA Interrupt Output Reset function、Cascading and address extension SPI SOIC-28-300mil I/O Expanders ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:MCP23S17-E/SO, from CERN's library) and its footprint (Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 4 are in stock at JLCPCB (part C145413). 29 open-source boards in 21 repositories on GitHub use it.

Symbol

11CS12SCK13SI14SO17A216A115A018RESET20INTA19INTB9VDD10VSS28GPA727GPA626GPA525GPA424GPA323GPA222GPA121GPA08GPB77GPB66GPB55GPB44GPB33GPB22GPB11GPB0
Analog & Interface:MCP23S17-E/SOFrom CERN's library

Footprint

12345678910111213141516171819202122232425262728
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mmFrom KiCad's library

From the datasheet

13
Supply, least
1.8 V · VDD, recommended operating, -40°C to +85°C, min · p. 4
Supply, most
5.5 V · VDD, recommended operating, -40°C to +85°C, max · p. 4
Supply, least
4.5 V · VDD, recommended operating through +125°C, min · p. 1
Supply, most
5.5 V · VDD, recommended operating through +125°C, max · p. 1
Supply, absolute maximum
5.5 V · VDD with respect to VSS, absolute max · p. 3
Works from
-40 °C · ambient operating at VDD = 4.5–5.5 V, min · p. 1
Works up to
125 °C · ambient operating at VDD = 4.5–5.5 V, max · p. 1
Takes working
1 mA · IDD, SCK = 1 MHz, max · p. 4
Takes asleep
1 µA · standby, -40°C to +85°C, max · p. 4
Takes asleep
3 µA · standby, VDD = 4.5–5.5 V, +85°C to +125°C, max · p. 4
A pin gives at most
25 mA · any output pin, sinking, absolute max · p. 3
A pin gives at most
25 mA · any output pin, sourcing, absolute max · p. 3
Data rate, most
10 Mbit/s · SPI interface, max · p. 1

Open-source boards using it

29See all 29
  • 4 layers243.8 × 171.5 mmNeotron Pico, the printed circuit board in 3D

    Neotron Pico

    Neotron-Compute/Neotron-Pico

    A Neotron powered by the Raspberry Pi Pico

    242 parts250
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers65 × 100 mmGamegirl v02, the printed circuit board in 3D

    Gamegirl v02

    davidperrenoud/Gamegirl

    The retro console done right.

    212 parts109
  • 4 layers142.3 × 105.7 mmQmtech minimig, the printed circuit board in 3D

    Qmtech minimig

    ranzbak/qmtech_minimig

    KiCad design for a minimig compatible board for the QM_XC7A100T_DDR3 board.

    222 parts24
  • 2 layers149.3 × 104.5 mmSequencer, the printed circuit board in 3D

    Sequencer

    michd/modular-synth

    Building a hardware modular synthesizer, this is where I'll collect module schematics and hardware designs.

    132 parts20
  • 2 layers70.6 × 33.1 mmUSD, the printed circuit board in 3D

    USD

    o7-machinehum/uSD_Breakout

    Micro SD (uSD) Breakout is a device to be inserted into a micro SD card slot to breakout the pins

    46 parts7
  • 2 layers57.4 × 38.6 mmSPI 28c256, the printed circuit board in 3D

    SPI 28c256

    homebrew8088/Raspberry-Pi-32k-EEPROM-Programmer

    Raspberry PI eeprom writer code

    7 parts6GPL-3.0
  • 2 layers191.5 × 97.6 mmOpen Apple 1 SBC, the printed circuit board in 3D

    Open Apple 1 SBC

    davischris/OpenAC1

    This work is largely based on the work of Tor-Eirik Bakke Lunde (https://github.com/tebl/RC6502-Apple-1-Replica).

    72 parts4GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP23S17-E/SO?

Yes. The symbol is Analog & Interface:MCP23S17-E/SO and the footprint Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP23S17-E/SO?

SOIC-28-300mil, with 28 pins. Its footprint is drawn on this page.

Where is the MCP23S17-E/SO datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP23S17-E/SO?

JLCPCB lists it as part C145413, with 4 in stock; the sellers' links on this page open their listings.

What can replace the MCP23S17-E/SO?

Parts like it in the library: the MCP23S18-E/SO by Microchip Technology, the MCP23S17-E/SS by Microchip Technology, the MCP23S17T-E/ML by Microchip Technology and the MCP23S08-E/SO by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP23S17-E/SO?

29 boards in 21 repositories on GitHub; the most starred are listed on this page, with their KiCad files.