Skip to the content
12

UCLAMP0501H.TCT

SEMTECHExtended

-55℃~+125℃@(Tj) 1 12.5V 160pF 16A 240W 5V 5uA 6V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOD-523 ESD and Surge Protection (TVS/ESD) ROHS

Part id
semtech/UCLAMP0501H.TCT
Category
ESD And Surge Protection (TVS, ESD)
Package
SOD-523
Pins
2
In stock
278 at JLCPCB (C117557)
Used on
11 open-source boards

Overview

The UCLAMP0501H.TCT is an ESD And Surge Protection made by SEMTECH in a SOD-523 package with 2 pins. -55℃~+125℃@(Tj) 1 12.5V 160pF 16A 240W 5V 5uA 6V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SOD-523 ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SOD-523, from KiCad's library), ready for a KiCad board. 278 are in stock at JLCPCB (part C117557). 11 open-source boards in 2 repositories on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-523From KiCad's library

Pinout

2
The pins of the UCLAMP0501H.TCT
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

11See all 11
  • 6 layers69.3 × 111.8 mmFMC MIPI v2, the printed circuit board in 3D

    FMC MIPI v2

    VideoGPU/FMC_MIPI

    FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface

    143 parts22
  • 4 layers255.9 × 224.5 mmCentral control unit, the printed circuit board in 3D

    Central control unit

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    1,880 parts1
  • 4 layers255.9 × 224.5 mmCentral control unit, the printed circuit board in 3D

    Central control unit

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    929 parts1
  • 2 layers36.2 × 33.7 mmConnecting connector-1-wire, the printed circuit board in 3D

    Connecting connector-1-wire

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    15 parts1
  • 2 layers36.2 × 33.7 mmConnecting connector-1-wire, the printed circuit board in 3D

    Connecting connector-1-wire

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    14 parts1
  • 2 layers48.3 × 45.7 mmHub-1-wire, the printed circuit board in 3D

    Hub-1-wire

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    33 parts1
  • 2 layers48.3 × 45.7 mmHub-1-wire, the printed circuit board in 3D

    Hub-1-wire

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    24 parts1
  • 2 layers129.8 × 92.5 mmSignalization by fireplace, the printed circuit board in 3D

    Signalization by fireplace

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    204 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the UCLAMP0501H.TCT?

Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SOD-523, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the UCLAMP0501H.TCT?

SOD-523, with 2 pins. Its footprint is drawn on this page.

Where is the UCLAMP0501H.TCT datasheet?

SEMTECH publishes it: the Datasheet link on this page opens it.

Where can I order the UCLAMP0501H.TCT?

JLCPCB lists it as part C117557, with 278 in stock; the sellers' links on this page open their listings.

What can replace the UCLAMP0501H.TCT?

Parts like it in the library: the ESD5Z5.0T1G-MS by MSKSEMI, the ESD5Z5.0 by onsemi, the ESD5B5.0S by onsemi and the H5VUD5BB by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the UCLAMP0501H.TCT?

11 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.