STM32F103

82 boards

KiCad boards from 31 GitHub repositories tagged “stm32f103”, the most starred first; open any of them in PCBKit.

4 layers21 × 51 mm
Easyduino RP2040
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
65 parts755CERN-OHL-P-2.0
2 layers48 × 20 mm
Adapter soic8 solder
bbogush/nand_programmer
NANDO - NAND Open programmer
3 parts391GPL-3.0
2 layers69.2 × 20.8 mm
Fastusbasp v2
amitesh-singh/FASTUSBasp
This is the fast avr programmer for AVR MCUs based on cheap stm32f103c8t6 board with usb-to-serial support.
25 parts106
4 layers60.2 × 20.8 mm
PhaseLatchMini
AndersBNielsen/PhaseLatchMini
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board.
63 parts72
2 layers48.9 × 99.7 mm
SID Arduino 2024
Blinken-Lights/synth-modules
Synth module schematics and code
72 parts30MIT
2 layers82.1 × 22.5 mm
Star pointer
dilshan/star-pointer
DIY virtual electronic finderscope for astronomical telescopes
39 parts24MIT
2 layers36 × 100 mm
Eleph
FeruzTopalov/eleph
GPS-based local relative navigation system for group of up to 6 members
56 parts24GPL-3.0
2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16
2 layers80 × 60 mm
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10
2 layers74 × 63.1 mm
Audio player
Vaaarad07/PCB_Designs
A repo with STM32 based PCB designs
87 parts10MIT
2 layers70 × 90 mm
NeuralRobot
viktorvano/NeuroBot
Robot With Deep Neural Network
74 parts9MIT
2 layers55 × 65 mm
PS2-MSX F1
evandrosouza-developer/ps2tomsxUSB
This one is a full open design (electronics, pcb and firmware) of a PS/2 Keyboard adapter with USB console for use in MSX and other legacy computers - 15x8 matrix(BCD input - 8 bits "Low active" output).
35 parts7MIT
4 layers74 × 28 mm
OpenFlowMeter
JochiSt/OpenFlowMeter
Measuring Flow
156 parts6GPL-3.0
2 layers85 × 50 mm
DataAcquisitionUnit
RobertGawron/HardwareDataLogger
Data logger shield based on STM32+ESP32. Has: LCD, keyboard, WIFi, UART and SD card for data storage. Input is as pulse counter and UART communication.
70 parts6MIT
4 layers52.1 × 20.3 mm
Greenpill
lbthomsen/greenpill
STM32 Green Pill (STM32F103 Devvelopment Board)
33 parts4
2 layers53.3 × 22.9 mm
B STM32F103-EVAL R1.0
Boardoza/Boardoza_STM32F103_Blue_Pill_Development_Board
Compact Blue Pill STM32F103C8T6-based ARM Cortex-M3 development board for versatile embedded applications.
35 parts3CC-BY-SA-4.0
2 layers80.3 × 29.5 mm
Nixie power
VersBinarii/retro-clock
Rust + stm32f103 + Nixie
17 parts3
2 layers30 × 68.5 mm
Df pill
epchain/df-pill
Kicad EDA project of a general purpose STM32F103Cx board
63 parts2Unlicense
2 layers68.6 × 36.6 mm
High accuracy logging volt ampmeter
Fescron/diy-logging-volt-ampmeter
DIY logging voltage/current meter
52 parts2
2 layers19.2 × 14.1 mm
Ch32v003 usb
michalpiekos/ch32v003-stm32-usb-hid
Minimal-cost USB HID device: CH32V003 ($0.10 RISC-V, software USB) vs STM32F103 (HAL). Custom KiCad PCB and BOM cost comparison.
6 parts2MIT
2 layers42.5 × 62.5 mm
RSTM32F103VET6
r-pv/STM32F103VET6_STUno
An ST development board based on the STM32F103VET6 MCU compatible with STM32Duino (Arduino).
38 parts2GPL-3.0
2 layers81 × 72.8 mm
GPS INS PCB
siddarthiyer/GPS-aided-Inertial-Navigation-System-Module
Upper 6 bits - Module ID - max 0x3F Lower 5 bits - Command ID - max 0x1F CAN ID = (Module ID Default Module ID : 0x200 (Standard)
29 parts2
2 layers65 × 56 mm
Titan 2022
hpvdt/titan_2022
TITAN Vision System going into WHPSC 2022
73 parts1
2 layers100 × 50 mm
Carga Electronica
kr4fty/Carga-Electronica-STM32
Desarrollo de un Sistema de Control PID para una Carga Electrónica utilizando un STM32
49 parts1