2 layers36 × 20 mm
Servo
28 boardsKiCad boards from 14 GitHub repositories tagged “servo”, the most starred first; open any of them in PCBKit.
- 4 layers37.6 × 39.9 mm
Servo drive
atopile/spin-servo-drive
SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀
125 parts130MIT - 2 layers49.5 × 45.7 mm
- 2 layers
- 2 layers100 × 100 mm
ELKS
RoboticsBrno/RB3206-ELKS
💡 ELKS aka ESP Learning Kit Starter is a development board for the ESP32-S3 microcontroller.
84 parts4MIT - 2 layers43 × 43 mm
Mechaduino Hardware KiCad
IDMIL/Mechaduino-Hardware-KiCad
An updated KiCad port of Tropical Labs' open-source industrial servo.
64 parts3 - 2 layers34 × 4 mm
- 4 layers124 × 23 mm
Octobot controller
Deivid-Negoita/octobot
An eight-legged walking robot I built end to end: chassis CAD, a 24-servo ATmega32U4 controller board, the firmware, and a browser IK workbench you can drive it from.
120 parts1MIT - 2 layers56.3 × 118.2 mm
Robot
jhud/robot_board
Controller board for building servo-based robots, such as hexapods.
90 parts1GPL-3.0 - 4 layers96 × 43 mm
Outdoor module
shm-dmitry/auto_close_window
This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"
127 parts1Apache-2.0 - 4 layers64 × 80 mm
Iris brainstem
HeyPCB/iris-brainstem
Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.
97 partsCERN-OHL-S-2.0 - 2 layers39.6 × 23.9 mm
Tester serw
ironiron/servo-tester
Small servo tester designed for Attiny13a. Pulse width 0.5-2.5ms; 3 modes: oscillating, normal and neutrum.
10 partsUnlicense - 2 layers23 × 34 mm
Microduck HUB RevC
jaggerzhong/microduck-hub-board
Microduck（飞特 HD1910）无源四路舵机总线 HUB 分线板：23×34 mm、2 层 1.0 mm、4×M2 孔对齐髋舵机外壳；含 Gerber、KiCad 与生成脚本 | Passive 4-port servo bus hub for the Microduck biped
10 partsCERN-OHL-S-2.0 - 2 layers66 × 38 mm
UsbServoController
ucandevices/UsbServoController
12-channel USB-C servo controller, Pololu Maestro compatible, MCP server for AI agents. Open hardware, CH32V203 RISC-V
63 partsMIT - 2 layers8.1 × 11 mm
- 2 layers8.4 × 3.6 mm
- 2 layers45.3 × 42.7 mm
- 2 layers9 × 3.6 mm
- 2 layers225.7 × 100.8 mm
Drv8300
atopile/spin-servo-drive
SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀
15 parts130MIT - 2 layers225.7 × 100.8 mm
Ldk220m r
atopile/spin-servo-drive
SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀
5 parts130MIT - 2 layers225.7 × 100.8 mm
Ma732
atopile/spin-servo-drive
SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀
2 parts130MIT - 2 layers225.7 × 100.8 mm
Saleae header
atopile/spin-servo-drive
SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀
5 parts130MIT - 2 layers225.7 × 100.8 mm
Sk6805side
atopile/spin-servo-drive
SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀
2 parts130MIT - 2 layers225.7 × 100.8 mm
Sn65hvd230dr
atopile/spin-servo-drive
SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀
2 parts130MIT