2 layers66.9 × 74.5 mm
Raspberry
54 boardsKiCad boards from 27 GitHub repositories tagged “raspberry”, the most starred first; open any of them in PCBKit.
- 6 layers82 × 155 mm
- 2 layers54.6 × 89.5 mm
- 4 layers347 × 156.1 mm
ENV KB RGB
Envious-Data/Env-KB
A custom mechanical keyboard inspired by the CFTKB Mysterium utilizing the Raspberry Pi Pico
377 parts256GPL-3.0 - 2 layers54.6 × 89.5 mm
- 6 layers43.8 × 29.9 mm
Argo v2
azlan-works/Argo
A custom, opensource CM5 carrier board for portable and compact applications.
80 parts136CERN-OHL-S-2.0 - 2 layers68.6 × 71.1 mm
- 2 layers55 × 23 mm
Pi3 extension board
Pekaway/VAN_PI
MAIN REPO VAN PI - the Raspberry based DIY AIO Camper Unit
5 parts87 - 2 layers
CurrentSensor
antevens/boatcontrol
A Relay PCB with a socket for a Raspberry Pi or Nvidia Jetson to control everything on a boat
21 parts36 - 2 layers37 × 18.3 mm
RTL8812AU module
ochin-space/ochin-CM4v2
It' the repository for the docs and schematics related to the ochin-CM4v2.x.x Carrier Board
9 parts25GFDL-1.3 - 2 layers51 × 20 mm
- 2 layers140 × 90 mm
- 2 layers65 × 56.5 mm
- 2 layers135 × 90 mm
Edgeberry
Edgeberry/Edgeberry-Baseboard
Edgeberry Base Board for Raspberry Pi model B
57 parts12CERN-OHL-W-2.0 - 2 layers81.3 × 56 mm
Rasp heltec lora hat
phfbertoleti/shield_hat_RaspLoRaWAN_plus
Repositório oficial do shield/hat RaspLoRaWAN+
21 parts12MIT - 4 layers25.5 × 22.4 mm
Wi se rewirable
depau/wi-se-hw
Cheap and tiny ESP8266 boards for Wi-Se to access your SBC or router serial port remotely
51 parts11 - 2 layers17.8 × 35.6 mm
OctoPrint ShutdownButtonLEDBuzzer
danieleborgo/OctoPrint-ShutdownButtonLEDBuzzer
This OctoPrint plugin implements a shutdown physical button for the Rasperry Pi, with a buzzer and a status LED.
6 parts6GPL-3.0 - 2 layers65 × 30 mm
- 4 layers85 × 56 mm
- 2 layers49.8 × 63.2 mm
Edgeberry console cartridge
Edgeberry/Edgeberry-HWCartridge-ConsoleCAN
An Edgeberry Hardware Cartridge with a CAN-bus interface and USB console access
88 parts4CERN-OHL-W-2.0 - 2 layers30 × 65 mm
Dakboard HDMI dimmer v1
DotaPie/Dakboard-HDMI-dimmer-HW
Custom Raspberry Pi HAT with a BH1750 light sensor and PIR motion sensor for automatic HDMI display dimming. KiCAD source and JLCPCB-ready gerbers. Fits any Raspberry Pi with a 40-pin header.
17 parts1EUPL-1.2 - 2 layers90.1 × 85.5 mm
PCBsens
Dragonyx118/LagmaBills
A Mecanum-wheeled robot for civil protection, powered by a Raspberry Pi orchestrating two custom ESP32 PCBs, sensors, a robotic arm, and a drone companion over MQTT.
41 parts1 - 2 layers27.9 × 15.2 mm
- 2 layers86.8 × 64.3 mm
