Skip to the content
PCBKitNew board

Pico

62 boards

KiCad boards from 37 GitHub repositories tagged “pico”, the most starred first; open any of them in PCBKit.

  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers54.6 × 89.5 mmPicoRX, the printed circuit board in 3D

    PicoRX

    dawsonjon/PicoRX

    Build a SDR SW/MW/LW Receiver with a Raspberry Pi Pico

    80 parts556
  • 4 layers347 × 156.1 mmENV KB RGB, the printed circuit board in 3D

    ENV KB RGB

    Envious-Data/Env-KB

    A custom mechanical keyboard inspired by the CFTKB Mysterium utilizing the Raspberry Pi Pico

    377 parts256GPL-3.0
  • 2 layers54.6 × 89.5 mmThings, the printed circuit board in 3D

    Things

    dawsonjon/101Things

    A collection of cool projects to make!

    46 parts231MIT
  • 2 layers21.2 × 51.6 mmEnvPicoLiPo, the printed circuit board in 3D

    EnvPicoLiPo

    Envious-Data/EnvOpenPico

    An open source RP2040 MCU Board Family

    57 parts151GPL-3.0
  • 4 layers87.1 × 78.2 mm3 in 1 Panel, the printed circuit board in 3D

    3 in 1 Panel

    kelu124/pic0rick

    An rp2040-based acquisition board for pulse-echo ultrasound

    115 parts116
  • 2 layers45 × 80 mmFrontBoard, the printed circuit board in 3D

    FrontBoard

    Michi71/PicoVintageSynthCollection

    Vintage synthesizer emulations for the RP2350

    33 parts77GPL-3.0
  • 2 layers55.4 × 34.5 mmWii mainboard, the printed circuit board in 3D

    Wii mainboard

    xtreme8000/picoAVE

    Wii HDMI mod using a rp2040 mcu

    38 parts49GPL-3.0
  • 2 layers43.2 × 27.9 mmMuino debugger, the printed circuit board in 3D

    Muino debugger

    martijnvwezel/pico-probe-programmer

    The simple pico can be used to program other devices. Raspberry pi made such an effort. However there is no board yet, that is open-source and can be used with OpenOCD as a general-purpose programmer

    18 parts27MIT
  • 2 layers88 × 88 mmTtl2dvi tht, the printed circuit board in 3D

    Ttl2dvi tht

    charlysan/pico-ttl2dvi

    RP2350 Based TTL Video To DVI Converter

    37 parts21MIT
  • 2 layers120.7 × 70.6 mmPicoFX, the printed circuit board in 3D

    PicoFX

    dj505/PicoFX

    A compact keyboard-style controller for Pump it Up

    52 parts20GPL-3.0
  • 2 layers125 × 56 mmML2, the printed circuit board in 3D

    ML2

    brucemack/microlink

    An open source EchoLink/AllStarLink implementation that runs on a simple microcontroller.

    73 parts18GPL-3.0
  • 2 layers100 × 100 mm1551-III Pico, the printed circuit board in 3D

    1551-III Pico

    ytmytm/1551-rePico

    Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.

    80 parts16GPL-3.0
  • 2 layers140 × 90 mmPicoIndustrial, the printed circuit board in 3D

    PicoIndustrial

    feecat/PicoIndustrial

    Industrial Control Module Based on RPI PICO

    163 parts14GPL-3.0
  • 2 layers65 × 56.5 mmP1p2 pi hat, the printed circuit board in 3D

    P1p2 pi hat

    siro20/P1P2_HBS_USBCdc_Modem

    Daikin P1/P2 Raspberry Pi hat

    72 parts14
  • 2 layers254 × 85.1 mmFightKey, the printed circuit board in 3D

    FightKey

    blueOkiris/FightKey

    A keyboard-based fight stick

    31 parts10
  • 2 layers112.4 × 96.1 mmEnv NPD, the printed circuit board in 3D

    Env NPD

    Envious-Data/Env-NPD

    A Raspberry Pi Pico powered Numpad!

    39 parts9GPL-3.0
  • 4 layers147.8 × 77 mm2xBLDCPicoV3, the printed circuit board in 3D

    2xBLDCPicoV3

    AmericanRework/Pico-2x-BLDC

    One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.

    135 parts7
  • 2 layers88.9 × 63.5 mmPicotouch drumcard, the printed circuit board in 3D

    Picotouch drumcard

    todbot/picotouch_drumcard

    Card-sized drum synth / sequencer with MIDI In/Out

    80 parts7GPL-3.0
  • 2 layers50.5 × 20 mmPlayaNavigatorHw, the printed circuit board in 3D

    PlayaNavigatorHw

    zshivers/PlayaNavigator

    GPS-based device to navigate at Burning Man.

    18 parts7MIT
  • 2 layers100 × 70 mmPico rx, the printed circuit board in 3D

    Pico rx

    ra0sms/picorx_digi

    SDR receiver for Digi modes

    79 parts6MIT
  • 4 layers68.9 × 37.6 mmPicoGamePad indev, the printed circuit board in 3D

    PicoGamePad indev

    Michael-Lloyd/PicoGamePad

    RP2040 Gamepad and Microcontroller Breakout Board. Type A is used for teaching students to reflow SMD @ UNSW Makerspaces.

    54 parts5GPL-3.0
  • 2 layers98.2 × 68.8 mmPIKBD, the printed circuit board in 3D

    PIKBD

    trickydee/ultramegausb-atari-st-rpikbd

    USB & Bluetooth to IKBD Interface for Atari ST / STE / Mega and TT

    12 parts5GPL-3.0
  • 2 layers235 × 95.7 mmKeyboard, the printed circuit board in 3D

    Keyboard

    JolonB/Pico-Steno

    A Raspberry Pi Pico based stenography keyboard

    87 parts4