Skip to the content

PCB

2,721 boards

KiCad boards from 1,297 GitHub repositories tagged “pcb”, the most starred first; open any of them in PCBKit.

  • 2 layers69.6 × 66.4 mmPomodoro pal, the printed circuit board in 3D

    Pomodoro pal

    HeyPCB/pomodoro-pal

    Pomodoro Pal: A tomato on your desk that keeps you focused for 25 minutes, without your phone. KiCad 10, heypcb.ai merch.

    41 partsCERN-OHL-S-2.0
  • 4 layers128 × 51.4 mmQuack face, the printed circuit board in 3D

    Quack face

    HeyPCB/quack-face

    Face board for the Open Duck Mini's head: eye LEDs, projector driver, I2S amp and mic, antenna servos, shaped to the head. 4-layer KiCad 10 board plus printed standoffs, fit-checked in the head CAD.

    55 partsCERN-OHL-S-2.0
  • 2 layers156 × 55.9 mmRuler dino, the printed circuit board in 3D

    Ruler dino

    HeyPCB/ruler-dino

    Ruler Dino: The bench ruler that measures, sizes screws and tests your wires. KiCad 10, heypcb.ai merch.

    13 partsCERN-OHL-S-2.0
  • 2 layers40.3 × 61.3 mmTorch cat, the printed circuit board in 3D

    Torch cat

    HeyPCB/torch-cat

    Torch Cat: Boop the cat's nose and its eyes light up your keyhole. KiCad 10, heypcb.ai merch.

    18 partsCERN-OHL-S-2.0
  • 4 layers64.6 × 55.2 mmWhisker, the printed circuit board in 3D

    Whisker

    HeyPCB/whisker

    Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.

    118 partsCERN-OHL-S-2.0
  • 2 layers70 × 120 mmMultimetre V2, the printed circuit board in 3D

    Multimetre V2

    hilham1990/Multimetre

    AkademiUsta Multimetre: ATmega328P + 16 bit ADS1115 ADC, OLED ekran ve Li-ion pil ile açık kaynak el multimetresi. KiCad 10 dosyaları, Gerber ve LCSC kodlu BOM. Kart henüz üretilmedi.

    86 parts
  • 2 layers45 × 40 mmSpark board, the printed circuit board in 3D

    Spark board

    hollowmaster1496/Spark-Night-Light

    electronic circuit for night light

    12 parts
  • 4 layers48 × 52 mmCube, the printed circuit board in 3D

    Cube

    Honzaaa45/cube-hologram-pcb

    Carte electronique d'un afficheur holographique Pepper's Ghost : CAO KiCad 4 couches entierement generee par du code et verifiee automatiquement

    63 partsMIT
  • 2 layers50 × 50 mmMagniCube RevA, the printed circuit board in 3D

    MagniCube RevA

    hotwolf/MagniCube

    A 4x4x4 LED cube driven by a NXP MagniV MCU

    136 parts
  • 2 layers53.3 × 68.6 mmTicTacToe, the printed circuit board in 3D

    TicTacToe

    hotwolf/TicTacToe

    A Tic-tac-toe Arduino Shield

    71 parts
  • 2 layers72 × 53 mmVoltWatch, the printed circuit board in 3D

    VoltWatch

    hridhayesh09/VoltWatch

    Custom PCB power surge detection system using ESP32 and ZMPT101B

    11 parts
  • 2 layers96 × 70 mmHXTX XS WEAR 底板 4.0 v125 2026-01-09-12-46, the printed circuit board in 3D

    HXTX XS WEAR 底板 4.0 v125 2026-01-09-12-46

    HuaqiuOpenHardware/xinghongpai-nearlink-dev-board

    Xinghongpai WS63V100/Hi3863 NearLink (SLE) open-source development board with KiCad schematic/PCB, BOM and OpenHarmony examples. 星鸿派星闪开发板。

    57 parts
  • 4 layers66.2 × 49.2 mmT1s hat, the printed circuit board in 3D

    T1s hat

    hwkim3330/elite-t1s-hat

    10BASE-T1S HAT for the LilyGO T-ETH-Elite (ESP32-S3): Microchip LAN8651, 4-layer KiCad board generated from Python, JLCPCB-ready, node + bridge firmware, 3D models

    38 parts
  • 2 layers85 × 54 mmCredit card clock, the printed circuit board in 3D

    Credit card clock

    i-Saac-IV/credit-card-clock

    A fully functioning clock on a credit card sized PCB.

    114 partsMIT
  • 2 layers100 × 100 mmVerbum horolgium, the printed circuit board in 3D

    Verbum horolgium

    i-Saac-IV/verbum-horologium

    A digital clock that displays time in an analog fashion.

    37 partsMIT
  • 2 layers63.8 × 95.8 mmControl cnc esp32D, the printed circuit board in 3D

    Control cnc esp32D

    IagoAbreu-Core/CNC_ESP32

    CNC control plate for 4 motors

    23 parts
  • 2 layers33 × 39.5 mmDc motor driver, the printed circuit board in 3D

    Dc motor driver

    Idorobots/ttgo-t7-motor-driver

    TTGO T7-based DC motor driver board.

    29 parts
  • 2 layers53.3 × 33 mmEsp01s power board, the printed circuit board in 3D

    Esp01s power board

    idreamshen/esp01s-power-board

    ESP-01S 供电底板

    19 parts
  • 2 layers38 × 35 mmSTM32 Messgeraet, the printed circuit board in 3D

    STM32 Messgeraet

    ijafarov7/stm32-klima-messgeraet

    Temperatur- und Feuchte-Messgerät mit STM32F103, SHT40 und OLED (C/HAL, KiCad)

    19 parts
  • 2 layers50 × 50 mmRc helicopter mainboard, the printed circuit board in 3D

    Rc helicopter mainboard

    ikajdan/rc-helicopter-mainboard

    RC helicopter mainboard based on an STM32 MCU

    54 partsCERN-OHL-P-2.0
  • 4 layers130.4 × 75.4 mmPhq u, the printed circuit board in 3D

    Phq u

    illdefined/phq-u

    Step‐down power converter

    139 parts
  • 2 layers211.5 × 72.4 mmOtis34, the printed circuit board in 3D

    Otis34

    indianpojken/otis34

    34-key unibody keyboard w/ hotswappable choc v1 switches

    83 parts
  • 2 layers39.6 × 23.9 mmTester serw, the printed circuit board in 3D

    Tester serw

    ironiron/servo-tester

    Small servo tester designed for Attiny13a. Pulse width 0.5-2.5ms; 3 modes: oscillating, normal and neutrum.

    10 partsUnlicense