
Flight controller version1
santhazsolt/stm32-based-quadcopter-drone
Custom STM32F411 quadcopter flight controller: KiCad PCB, embedded C, ICM-20948 IMU over SPI, quaternion complementary filter, PID attitude control.
KiCad boards from 598 GitHub repositories tagged “pcb-design”, the most starred first; open any of them in PCBKit.

santhazsolt/stm32-based-quadcopter-drone
Custom STM32F411 quadcopter flight controller: KiCad PCB, embedded C, ICM-20948 IMU over SPI, quaternion complementary filter, PID attitude control.


serpentsniper/hbridge-motor-driver
Two-channel brushed DC motor driver in KiCad. Discrete IRLZ44N H-bridges, IR2104 gate drivers, per-channel current sense and quadrature encoder inputs, on a 74 x 56 mm board with a Raspberry Pi Pico.

shawnsony07/smart-grid-fault-detector
An ATmega328P-based smart grid fault detector featuring high-side current sensing via INA180A1 and voltage monitoring.

shishir-dey/pcb-dev-fpga-iCE40
A 2 layer development board with a Lattice Semiconductor ICE40UP5K-SG48ITR FPGA. Made with KiCad

shishir-dey/pcb-mcu-stm32c0
An STM32C031 microcontroller with M.2 B+M key connector

SHREYASHSB21/ETA3000-3S-Active-Cell-Balancer
3S inductive active cell-balancing module based on the ETA3000, designed for up to 1.2 A balancing current.

SHREYASHSB21/L298N-Compact--PCB
Compact L298N motor driver PCB with integrated 7805 regulator and flyback diode protection


SingularTeabag/Battery-Management
A Repository for Battery Management PCBs

Smartech-git/16LED-Display-Board
16 LEDs display board with 74HC595 SIPO SOIC chips, Designed with KiCad



Srushti-D-Hebbar/12v-ac-to-dc-converter
Two-layer KiCad PCB for converting 12V AC to unregulated DC using a full-wave bridge rectifier, capacitor filtering, and LED power indication.

Srushti-D-Hebbar/arduino-water-level-monitor
Arduino Uno water-level monitoring and pump controller with HC-SR04, 16×2 LCD, and relay-based pump control. Wokwi-validated and designed as a 2-layer PCB in KiCad 10.

Srushti-D-Hebbar/esp32-c3-wroom02-development-board
A custom 4-layer ESP32-C3-WROOM-02 development board designed in KiCad 10 - includes USB-C power/data, schematics, PCB layout, and manufacturing files.

Srushti-D-Hebbar/raspberry-pi-pico-development-board
Custom Raspberry Pi Pico-compatible development board designed from scratch in KiCad 10 using the RP2040 microcontroller.

Srushti-D-Hebbar/transformerless-power-supply
Two-layer transformerless power supply designed in KiCad, featuring AC rectification, capacitive voltage dropping, zener protection, and 5V regulation.

StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol
Solar-powered LoRaWAN weather station — 3 custom PCBs, bare-metal STM32, 4.3 km verified link

StanZalewski/lorawan-tenant-assistant
A WhatsApp and Telegram service for the tenants of a business complex. It does two jobs:

stephen-j8/bread-board-power-supply
Dual-rail ±12V breadboard power supply PCB — LM7812/LM7912 linear regulators, designed in KiCad. Second fabricated project.

stephen-j8/LED-Torch-KiCad-Project
Single-layer LED torch PCB — designed in KiCad. Includes schematic, PCB layout, and fabricated board photos. First fabricated project.

stevel1212-droid/stm32-rtc-climate-controller
Kicad project of an STM32-based board climate controller utilizing an RTC module for time-scheduled environmental reading of temperature/humidity with SHT30 sensor and optional small relay for control.

sthabisoslushaba/Flight-Controller-Design-2025
KiCad project for a drone flight controller based on an STM32 microcontroller