
Kicad project of an STM32-based board climate controller utilizing an RTC module for time-scheduled environmental reading of temperature/humidity with SHT30 sensor and optional small relay for control.
- Size
- 92.5 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 90
- Pads
- 246
- Tracks, vias
- 393, 85
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Jun 2026
- Updated
- 16 Jun 2026
Overview
Clock is an open-source printed circuit board by stevel1212-droid, from the stevel1212-droid/stm32-rtc-climate-controller repository on GitHub, published under the MIT licence. It is a 4-layer board of 92.5 × 70 mm with 69 parts on 90 nets, routed with 393 tracks and 85 vias.
It is built around the STM32F103C8T6, CP2102-GMR and SHT30-DIS-B2.5KS, with the BAT54C, CR2032-BS-6 and H3V3U10B among its other parts. Its parts include 17 capacitors, 16 resistors, 9 ICs, 3 diodes and 3 switches. It belongs with the lEDs and displays and sensors and measurement boards and the STM32 boards of this library.
Main components
12STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CP2102-GMR
WQFN-28-EP(5x5)-40℃~+85℃ 1Mbps 20mA 3V~3.6V 80uA Transceiver USB 2.0 WQFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersSHT30-DIS-B2.5KS
DFN-8-EP(2.5x2.5)-40℃~+125℃ 0%RH~100%RH 16bit 2.15V~5.5V 200nA Factory calibration、Built-in temperature and humidity compensation I2C ±0.2℃ ±2%RH DFN-8-EP(2.5x2.5) Temperature and Humidity Sensor ROHSSensirionTemperature And Humidity SensorBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesCR2032-BS-6
SMDBattery base CR2032 Gold SMD Button And Strip Battery Connector ROHSLian Xin TechnologyButton And Strip Battery ConnectorH3V3U10B
DFN1006-2L-55℃~+125℃ 0.3pF 125W@8/20us 200nA 25V 3.3V 5A@8/20us 6V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)PCF8563T/5,518-CN
SOP-8SOP-8 Real Time Clocks ROHSChipNoboReal Time ClocksXC6206P332MR-G
UncategorisedUnknown makerCC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21B105KBFNNNE
08051uF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTKT-0805G
0805-40℃~+85℃ 100mW 120° 2.6V~3.1V 430mcd 513nm~528nm 525nm 5mA Discrete Diode Emerald Green Water Clear 0805 LED Indication - Discrete ROHSHubei KENTO ElecLED Indication - Discrete1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
hardware/README.mdhere is the Kicad project files
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | CC0603KRX7R9BB104 | easyeda2kicad:C0603 | C15, C16, C18, C21, C23, C24, C25, C26, C27, C28, C29, C30 |
| 9 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 6 | 0603WAF1001T5E | easyeda2kicad:R0603 | R12, R15, R18, R20, R21, R24 |
| 4 | 0603WAF5101T5E | easyeda2kicad:R0603 | R16, R17, R23, R25 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H2, H3, H4, H5 |
| 3 | 0603WAF1003T5E | easyeda2kicad:R0603 | R13, R14, R22 |
| 2 | 0603WAF1002T5E | easyeda2kicad:R0603 | R11, R19 |
| 2 | CL10C200JB8NNNC | easyeda2kicad:C0603 | C19, C20 |
| 2 | CL21B105KBFNNNE | easyeda2kicad:C0805 | C14, C22 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type073_RT02603HBLU_1x03_P5.08mm_Horizontal | J1, J2 |
| 1 | 0603WAF1000T5E | easyeda2kicad:R0603 | R1 |
| 1 | 0805G | easyeda2kicad:LED0805-R-RD | LED3 |
| 1 | 1N4148W_C81598 | easyeda2kicad:SOD-123F_L2.7-W1.6-LS3.8-RD | D1 |
| 1 | 2N7002 | easyeda2kicad:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1 |
| 1 | BAT54C_C22466350 | easyeda2kicad:SOT-23-3_L2.9-W1.3-P1.90-LS2.8-BR | U10 |
| 1 | CP2102-GMR | easyeda2kicad:WQFN-28_L5.0-W5.0-P0.50-BL-EP3.2 | U7 |
| 1 | CR2032-BS-6 | easyeda2kicad:BAT-TH_CR2032-BS-6-1 | U11 |
| 1 | DM-OLED096-636 | easyeda2kicad:MODULE_DM-OLED096-636 | U5 |
| 1 | DSHP02TS-S | easyeda2kicad:SW-SMD_DSHP02TS-S | SW4 |
| 1 | FC-2012HRK-620D | easyeda2kicad:LED0805-RD | LED4 |
| 1 | G6K-2F-Y-DC5 | easyeda2kicad:RELAY-SMD_G6K-2F-X-XX | K1 |
| 1 | H3V3U10B | easyeda2kicad:DFN1006-2L-BI | U2 |
| 1 | PCF8563T/5,518 | easyeda2kicad:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U9 |
| 1 | PZ254V-11-04P_C2691448 | easyeda2kicad:HDR-TH_4P-P2.54-V-M | H1 |
| 1 | Q13FC1350000400 | easyeda2kicad:FC-135R_L3.2-W1.5 | X3 |
| 1 | SHT30-DIS-B | easyeda2kicad:DFN-8_L2.5-W2.5-P0.50-BL-EP | U8 |
| 1 | STC3MD20-T1 | easyeda2kicad:CAP-SMD_L4.5-W3.2_STC3MD20-T1 | C17 |
| 1 | STM32F103C8T6 | easyeda2kicad:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | U3 |
| 1 | TS-1088-AR02016 | easyeda2kicad:SW-SMD_L3.9-W3.0-P4.45 | SW3 |
| 1 | TYPE-C 16PIN 2MD | easyeda2kicad:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB2 |
| 1 | X50328MSB2GI | easyeda2kicad:CRYSTAL-SMD_L5.0-W3.2 | X2 |
| 1 | XC6206P332MR | easyeda2kicad:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U1 |
The 68 most common of 69 parts.
Similar boards
- 4 layers130 × 110 mm

- 4 layers42 × 155 mm

Before
alxgmpr/moisture-sensor
Indoor capacitive soil moisture sensor - nRF54L15 + nPM1300 + FDC1004, BTHome v2 over BLE
65 parts - 2 layers200 × 150 mm

- 2 layers100 × 103.5 mm

- 4 layers100 × 100 mm

Cheap version
nikolajevs/ai
Открыть PCBV1.kicadpro в KiCad 10. После обновления репозитория перечитать открытый проект с диска перед сохранением.
170 parts - 6 layers131 × 125 mm

Sunbeam em7000
Resident-X/brew-state
brew-state: bare-metal C state estimation and forward-horizon profiling for the Sunbeam EM7000. Built with Staircase.
444 partsMIT - 2 layers145.7 × 107.8 mm

TRS IO++
apuder/TRS-IO
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
104 parts75GPL-3.0 - 4 layers42 × 65 mm

Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT
Questions
How big is the Clock PCB?
It measures 92.5 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Clock use?
69 parts, built around the STM32F103C8T6, CP2102-GMR, SHT30-DIS-B2.5KS and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clock KiCad files?
From the stevel1212-droid/stm32-rtc-climate-controller repository on GitHub, at the commit this page was made from: the board is hardware/clock.kicad_pcb and its schematic hardware/clock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clock design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).