4 layers30 × 51 mm
Env sensor b
marcelpetrick/sensorly-unhinged
My very first PCB: an ESP32-C6 temperature/humidity sensor prototype, exploring compact and thermally isolated layouts from one shared electrical design.
64 parts1GPL-3.0
Openscad
67 boardsKiCad boards from 33 GitHub repositories tagged “openscad”, the most starred first; open any of them in PCBKit.
- 2 layers100 × 100 mm
HotBox
sundr007/HotBox
A benchtop thermal Chamber used to test electronics at elevated ambient temperature. Kicad PCB, STM32 firmware, OpenScad Mechanical
43 parts1GPL-2.0 - 2 layers355 × 120 mm
- 2 layers60 × 48 mm
Hub
cUDGk/vrc-fbt-hardware
VRChat向けフルボディトラッキング基板 — ハブ+デイジーチェーン端末・数と位置を自由に変更可能・KiCad/OpenSCAD一式
57 parts - 2 layers138 × 22.3 mm
- 2 layers92 × 54 mm
Blare clock
draarivpatel-ui/blare-clock
BlareClock: XIAO ESP32-C3 desk alarm clock with 2.25in ST7789 TFT, DS3231 RTC, 85dB piezo buzzer, KiCad 8 PCB, and OpenSCAD enclosure
12 partsMIT - 2 layers68 × 84 mm
Aarivpad
draarivpatel-ui/hackpad
AarivPad: 3x3 mechanical macropad with EC11 rotary encoder, 128x32 OLED, SK6812 RGB underglow, KiCad 8 PCB, OpenSCAD case, and KMK firmware
29 partsMIT - 2 layers20 × 20 mm
Sensor carrier
jaimebuildsthings/pit-pyro
DIY handheld tire pyrometer that reads tread temps by zone in one pull.
6 partsApache-2.0 - 2 layers80 × 80 mm
UV Curing Box
uwo-fast/OpenNasopharyngealSwab
Open Source Nasopharyngeal Swab and UV Curing System
23 partsGPL-3.0 - 2 layers98.4 × 190.5 mm
- 2 layers33 × 19 mm
- 2 layers74.9 × 49.5 mm
- 2 layers16.3 × 16.3 mm
- 2 layers40 × 20 mm
- 2 layers50 × 50 mm
Attiny44-ring
TheBeachLab/alphabets
Open Source Mechanical Split Flap Display, AKA Solari display
21 parts134MIT - 2 layers247.6 × 75.6 mm
- 2 layers68.6 × 53.3 mm
KiCadLibrary
PubInv/general-purpose-alarm-device
A general purpose alarm device (with software) as a module for medical devices (and others)
10 parts7AGPL-3.0 - 2 layers100 × 80 mm
PolyVent SPI Controller
PubInv/general-purpose-alarm-device
A general purpose alarm device (with software) as a module for medical devices (and others)
78 parts7AGPL-3.0 - 2 layers
Hybec hbl-273-g4
lachlanchen/AgInTi-LabCanvas
AgInTi LabCanvas: agentic studio for editable scientific figures, CAD devices, and experiment design.
6 parts5 - 2 layers
Lumileds no resistor
lachlanchen/AgInTi-LabCanvas
AgInTi LabCanvas: agentic studio for editable scientific figures, CAD devices, and experiment design.
6 parts5 - 2 layers
Tungsten-5v-400ma-3mm
lachlanchen/AgInTi-LabCanvas
AgInTi LabCanvas: agentic studio for editable scientific figures, CAD devices, and experiment design.
6 parts5 - 2 layers
Ws2812b-5050-rgb led
lachlanchen/AgInTi-LabCanvas
AgInTi LabCanvas: agentic studio for editable scientific figures, CAD devices, and experiment design.
8 parts5 - 2 layers69 × 51 mm
- 2 layers130 × 110 mm
