

Headless v1
A quiz game system
- Size
- 69 × 51 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 30
- Pads
- 98
- Tracks, vias
- 52, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Oct 2017
- Updated
- 13 Jun 2026
Overview
Headless v1 is an open-source printed circuit board by iley, from the iley/kamaji repository on GitHub, published under the MIT licence. It is a 2-layer board of 69 × 51 mm with 23 parts on 30 nets, routed with 52 tracks and 0 vias.
Its parts include 8 resistors, 8 connectors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdKamaji quiz game system
See kamaji.cc for assembly instructions and additional information.
Directories:
firmware: main source code;demo: code samples;3d: OpenSCAD models for the enclosure;pcb: schematic and printed circuit board layout in KiCAD format;misc: the rest.
SDK
We use PlatformIO with Arduino framework. It should also be possible to compile the code with the official Arduino IDE.
Compile and flash firmware
For v1 and v3 custom fuses must be programmed before first flashing.
pio run -e v1 -t fusesSelect the correct board version (v1, v2, v3) and flash it with:
pio run -e v1 -t uploadHardware
The recommended version for new builds is "Classic V1".
- V1 uses an ATmega328p running at 8MHz without an external oscillator. USBasp can be used for programming.
- V2 uses ATmega32u4 and a 128x64 graphics screen.
- V3 runs on ATmega328p with a 16MHz oscillator and and utilizes a PCF8574 I/O extender chip.
- "Classic V1" is an updated revision of V1. Fully compatible from software point of view.
- "Headless" is a USB MIDI device without a screen or buttons. Built around "Pro Micro" boards (ATMega32U4).
Code style
Let's stick to Google C++ Style Guide.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | RJ10 | kamaji:RJ10 | J1, J2, J3, J4, J5, J6, J7, J8 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
The 19 most common of 23 parts.
More from iley/kamaji
5- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers130 × 110 mm

- 2 layers100 × 100 mm

- 2 layers30 × 37 mm

Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the Headless v1 PCB?
It measures 69 × 51 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Headless v1 use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Headless v1 KiCad files?
From the iley/kamaji repository on GitHub, at the commit this page was made from: the board is pcb/headless_v1/headless_v1.kicad_pcb and its schematic pcb/button_v1/kamaji_button_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Headless v1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).