Mosfet

16 boards

KiCad boards from 13 GitHub repositories tagged “mosfet”, the most starred first; open any of them in PCBKit.

2 layers44 × 77 mm
UPS Monitor THT
wkcollis1-eng/DIY-LiFePO4-UPS
12V LiFePO4 UPS for Home Assistant and network gear. First full outage validation (May 6, 2026): 217 min AC-off, 4.18 Ah / 53.3 Wh delivered, graceful shutdown via slope-based cliff_imminent trigger — confirmed…
22 parts16MIT
2 layers110.5 × 90.8 mm
TeslaSMPS
devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems
112 parts7Unlicense
2 layers116.8 × 25.4 mm
GPIO power switch
moonbuggy/GPIO-power-switch
A low-side MOSFET switch controlled by a button and GPIO signals
44 parts2
2 layers75 × 50 mm
High voltage driver V1.0
PinBus/high-voltage_driver_board
This board has four independant high voltage drivers. These boards were designed to drive pinball machine solenoids, but their use is not limited to pinball machines.
33 parts1GPL-3.0
2 layers95 × 138 mm
ZVS
jenatton-Malik/zvs-driver
Mazzilli-topology ZVS driver — simulated in LTspice, built on a custom PCB and characterized on the bench
19 partsMIT
2 layers30 × 40.1 mm
REL1SW01
mlab-modules/REL1SW01
Dual MOSFET or single Relay switching module.
22 parts
2 layers97 × 50 mm
H bridge
Mohamed-U3/H-bridge-PCB
H-bridge with MOSFETs and IR2110 designed with KiCAD
52 partsMIT
2 layers100 × 100 mm
ESP12E
Mohamed-U3/Pressure-measuring-and-control-Board
This repository contains KiCad 9.0.2 schematics for a pressure‑control system built around an ESP‑12E module, dual precision pressure measurement channels, high‑side battery/adapter power path control, and isolated…
129 partsMIT
2 layers68.8 × 33.9 mm
Energy harvester
Rahul-2-specs/Wearable-Foot-Motion-Energy-Harvester
Wearable piezoelectric energy harvesting system that converts foot motion into electrical energy for low-power wearable and biomedical applications.
14 partsMIT
2 layers10.7 × 10 mm
SBK NFET1
sbarabe/SBK_FET1
Logic-level N-channel and P-channel MOSFET modules for education, breadboarding, and prototyping.
4 partsCERN-OHL-P-2.0
2 layers8.2 × 9.9 mm
SBK RP1
sbarabe/SBK_RP1
Open-source reverse polarity protection module for learning and embedded electronics projects.
5 partsCERN-OHL-P-2.0
2 layers74 × 55.8 mm
HBridge
serpentsniper/hbridge-motor-driver
Two-channel brushed DC motor driver in KiCad. Discrete IRLZ44N H-bridges, IR2104 gate drivers, per-channel current sense and quadrature encoder inputs, on a 74 x 56 mm board with a Raspberry Pi Pico.
63 partsMIT
4 layers100 × 80 mm
Bluepill BrushedQuad Driver
SimulatedFlow/kicad-board-2026-07-30-bluepill-brushed-quad
STM32 Bluepill brushed quadcopter board - 4 MOSFET motor drivers and IMU for brushed micro drones. Solder kit, bare PCB, KiCad source files.
27 parts
2 layers29.5 × 78 mm
Top Off Charger- Oct 2026
wkcollis1-eng/DIY-LiFePO4-UPS
12V LiFePO4 UPS for Home Assistant and network gear. First full outage validation (May 6, 2026): 217 min AC-off, 4.18 Ah / 53.3 Wh delivered, graceful shutdown via slope-based cliff_imminent trigger — confirmed…
19 parts16MIT
2 layers10.7 × 10 mm
SBK PFET1
sbarabe/SBK_FET1
Logic-level N-channel and P-channel MOSFET modules for education, breadboarding, and prototyping.
4 partsCERN-OHL-P-2.0
2 layers75 × 60.3 mm
HBridge
serpentsniper/hbridge-motor-driver
Two-channel brushed DC motor driver in KiCad. Discrete IRLZ44N H-bridges, IR2104 gate drivers, per-channel current sense and quadrature encoder inputs, on a 74 x 56 mm board with a Raspberry Pi Pico.
47 partsMIT