2 layers100 × 84 mm
Cyclope
RICCIARDI-Adrien/Cyclope
Raspberry Pi powered robot with camera live stream and 360° lidar.
88 parts5MIT
Linux
120 boardsKiCad boards from 40 GitHub repositories tagged “linux”, the most starred first; open any of them in PCBKit.
- 4 layers58 × 66 mm
H616 devboard
Bogdan8266/h616-board
8-layer Allwinner H616/618 SBC with DDR3, USB, Wi-Fi/BT and battery power support, designed for embedded Linux.
165 parts4CERN-OHL-P-2.0 - 2 layers109 × 95 mm
- 2 layers56.9 × 63.9 mm
Opi hat
eddyem/ARMsingleboard
Something for singleboard PC (Orange Pi Zero1/2 etc): I2C, SPI etc.
53 parts2GPL-3.0 - 4 layers70.5 × 128.5 mm
Pulsephone main board
pulseopen/PulsePhone
An almost fully modular open source phone running off of the DART-MX8M-MINI SoM.
94 parts2GPL-3.0 - 4 layers66 × 42 mm
Sbc
vd-rd/sbc_at91sam9g20
Open hardware SBC module based on AT91SAM9G20 @400MHz with 128MB RAM
116 parts2 - 4 layers204 × 150 mm
Gateway
Kampi/IoT-Gateway
Open-Source Zigbee, Thread, wM-Bus, LoRa, LoRaWAN gateway for Home Assistant.
319 parts1 - 2 layers101.6 × 76.2 mm
- 2 layers60 × 50 mm
- 2 layers30.5 × 65 mm
P4-HMD
asciilifeform/P4-HMD
FPGA PCB and Linux kernel support for the Private Eye P4 head-mounted display.
18 partsGPL-3.0 - 4 layers165.3 × 123.7 mm
RX8-7(WithoutOpAmps)
bradport02/RX8-Infotainment_System
An infotainment system for the Mazda RX-8 that integrates seamlessly with the climate control unit.
392 parts - 2 layers65.1 × 140.8 mm
- 2 layers54 × 54 mm
Steppers
eddyem/mmpp
MMPP (Multimode photometer-polarimeter) for the telescope Zeiss-1000 of SAO RAS.
55 partsGPL-3.0 - 2 layers90 × 70 mm
Carrier proto
flyboy-byte/riscv-pico
Real Linux on a Raspberry Pi Pico, with its own PS/2 keyboard and VGA screen — the RP2040 emulates a RISC-V CPU, SPI PSRAM becomes system memory, and the guest drives real GPIO pins.
18 partsMIT - 4 layers70 × 40 mm
Tagger
northernpaws/lasernet-rev1
Retrofit Zigbee PCBs, firmware, and a custom Linux-based game controller for the lasertag.net Falcon system.
80 parts - 4 layers74.5 × 21.5 mm
YerraGlasses
rbala25/YerraGlasses
Audio Augmented Smart Glasses - ESP32, Hardware Build, System Integration, and Firmware (C)
47 parts - 2 layers27.8 × 22.3 mm
Audio
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
46 parts4.3kMIT - 4 layers52.1 × 22.6 mm
Display eval
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
12 parts4.3kMIT - 4 layers33.7 × 12.4 mm
Display eval short
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
4 parts4.3kMIT - 2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers18.5 × 11.1 mm
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT - 6 layers59.5 × 62.7 mm
CM5 MINIMA 3
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
112 parts3.1kGPL-3.0 - 8 layers58.4 × 22.9 mm
RoyalBlue54L Feather
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
71 parts3.1kGPL-3.0