6 layers133 × 92 mm
Motherboard
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
264 parts4.3kMIT
2 layers
Encoder
byrantech/laptop4.3kanyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 7
- Pads
- 15
- Tracks, vias
- 24, 0
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20240225)
- Created
- 30 May 2024
- Updated
- 29 Mar 2026
Overview
Encoder is an open-source printed circuit board by byrantech, from the byrantech/laptop repository on GitHub, published under the MIT licence. It is a 2-layer board with 7 parts on 7 nets, routed with 24 tracks and 0 vias.
It is built around the MT6701CT-STD. Its parts include 1 capacitor and 1 IC. It belongs with the computers and single-board computers and keyboards and input boards of this library.
Main components
1README
haptic/README.mdHaptic
BLDC haptic feedback like smartknob.
NOTE:
Never completed :(
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 3.3V | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP4 |
| 1 | CLK | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2 |
| 1 | CSN | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | DO | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP3 |
| 1 | GND | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP5 |
| 1 | MT6701-CT | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
More from byrantech/laptop
6- 2 layers27.8 × 22.3 mm
Audio
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
46 parts4.3kMIT - 4 layers52.1 × 22.6 mm
Display eval
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
12 parts4.3kMIT - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers18.5 × 11.1 mm
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT - 4 layers33.7 × 12.4 mm
Display eval short
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
4 parts4.3kMIT
Similar boards
- 4 layers81.2 × 81.2 mm
- 2 layers32 × 20 mm
Gd32 encoder
avenhaus/SO-ARM100-Encoders
It explores to use much cheaper magnetic encoders for the Leader Arm instead of the regular servos. These dummy servos are also much easier to move manually, as there is no gear train that needs to back drive the servo…
26 parts45 - 4 layers46.3 × 37.7 mm
Interface
earlynerd/bl4818-servo-M23
This repository contains the electronics, embedded firmware, host software, and browser players for a network of brushless servo percussion actuators.
20 parts3 - 6 layers40 × 40 mm
Integrated FOC Stepper Driver
chpaxson/Echo-Telepresence
UC Berkeley ME 135/235 Spring 2025 Term Project
77 parts2 - 2 layers60 × 50 mm
- 4 layers92.5 × 85 mm
- 2 layers50 × 50 mm
- 2 layers42 × 42 mm
NEMA17 FOC Driver
maxmunzner/NEMA17_FOC_Driver
A Stepper Driver project with a PCB that acts as the driver and encoder.
37 parts1MIT
Questions
What parts does the Encoder use?
7 parts, built around the MT6701CT-STD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Encoder KiCad files?
From the byrantech/laptop repository on GitHub, at the commit this page was made from: the board is haptic/encoder/encoder.kicad_pcb and its schematic audio/audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Encoder design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).