Skip to the content

Hardware design

97 boards

KiCad boards from 53 GitHub repositories tagged “hardware-design”, the most starred first; open any of them in PCBKit.

  • 2 layers80.2 × 34.2 mmPsu main, the printed circuit board in 3D

    Psu main

    tb8-5/12VAC-Dual-Output-Buck-Power-Supply-PCB

    Custom 2-layer KiCad PCB converting 12VAC to regulated 5V and 3.3V outputs using full-wave rectification and synchronous buck converters.

    25 parts
  • 2 layers49.7 × 37.6 mmTransforemerless power supply, the printed circuit board in 3D

    Transforemerless power supply

    vaibhav-rm/kicad-portfolio

    A collection of PCB designs built with KiCad. Each project lives in its own folder with schematic, PCB layout, and its own README

    18 parts
  • 2 layers56.6 × 27.6 mmMSPMO PROJECt, the printed circuit board in 3D

    MSPMO PROJECt

    Varsha123-glitch/MSPM0G3507-Development-Board

    Custom 2-layer MSPM0G3507 development board designed in KiCad 9 with USB Type-C, CH340E USB-UART, SWD programming interface, and LIS2DH accelerometer.

    38 parts
  • 2 layersLd520, the printed circuit board in 3D

    Ld520

    yymqd/kicad-pcb-agent-skills

    AI Agent (Hermes) 驱动的 KiCad PCB 设计自动化技能集:三条管线(kicad-cli / MCP-KiCad / kcaa)阶段切换工作流

    17 partsMIT
  • 2 layers105 × 65 mmNebula, the printed circuit board in 3D

    Nebula

    z0b1/nebulatune

    NebulaTune is a HF reciever with a direct conversion single balanced diode product detector and a Si5351 as a local VFO. The VFO, encoder and the display are all controlled by the RP2350.

    31 partsMIT
  • 2 layers14 × 16.2 mmAnthracite footswitch, the printed circuit board in 3D

    Anthracite footswitch

    trope-oshw/anthracite

    MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)

    2 parts5CERN-OHL-S-2.0
  • 4 layers60 × 102 mmAnthracite top, the printed circuit board in 3D

    Anthracite top

    trope-oshw/anthracite

    MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)

    222 parts5CERN-OHL-S-2.0
  • 4 layers66.5 × 47 mmFlight controller, the printed circuit board in 3D

    Flight controller

    shazmeenShz/ESP32-Flight-Controller

    Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.

    48 parts3MIT
  • 2 layers40.6 × 30.5 mmController, the printed circuit board in 3D

    Controller

    yu2924/XPS

    preamplifier & power distributor for instruments

    22 parts3CC0-1.0
  • 2 layers42 × 34 mmControlPanel, the printed circuit board in 3D

    ControlPanel

    yu2924/XPS

    preamplifier & power distributor for instruments

    20 parts3CC0-1.0
  • 2 layers35 × 62 mmOutputConnector, the printed circuit board in 3D

    OutputConnector

    yu2924/XPS

    preamplifier & power distributor for instruments

    6 parts3CC0-1.0
  • 2 layers85 × 97 mmPS AC, the printed circuit board in 3D

    PS AC

    yu2924/XPS

    preamplifier & power distributor for instruments

    14 parts3CC0-1.0
  • 2 layers50 × 97 mmPS DC, the printed circuit board in 3D

    PS DC

    yu2924/XPS

    preamplifier & power distributor for instruments

    45 parts3CC0-1.0
  • 2 layers40.6 × 20.3 mmXPower, the printed circuit board in 3D

    XPower

    yu2924/XPS

    preamplifier & power distributor for instruments

    35 parts3CC0-1.0
  • 2 layers100 × 110 mmSHADOW 4WD Shield, the printed circuit board in 3D

    SHADOW 4WD Shield

    AssaadMH/shadow-4wd-motor-shield-pcb

    The 24-signal interface board that replaces SHADOW's perfboard wiring — and the two pin conflicts that only appeared on re-checking the spec.

    118 parts2MIT
  • 2 layers50 × 35 mmBench ble lipo sensor b204035a, the printed circuit board in 3D

    Bench ble lipo sensor b204035a

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    23 parts2Apache-2.0
  • 2 layers51 × 21 mmBench rp2040 usb hid 5eab0a5d, the printed circuit board in 3D

    Bench rp2040 usb hid 5eab0a5d

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    15 parts2Apache-2.0
  • 2 layers50 × 35 mmBle sensor node, the printed circuit board in 3D

    Ble sensor node

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    21 parts2Apache-2.0
  • 2 layers65 × 30 mmGolden rp2040 usb hid, the printed circuit board in 3D

    Golden rp2040 usb hid

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    35 parts2Apache-2.0
  • 2 layers50 × 30 mmMini biped robot, the printed circuit board in 3D

    Mini biped robot

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    36 parts2Apache-2.0
  • 4 layers160 × 100 mmQuadruped robot controller, the printed circuit board in 3D

    Quadruped robot controller

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    42 parts2Apache-2.0
  • 2 layers70 × 50 mmSensor data logger, the printed circuit board in 3D

    Sensor data logger

    mrcha033/hw-codesign

    Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.

    20 parts2Apache-2.0
  • 2 layers60 × 40 mmAUX RTN GND SHORT, the printed circuit board in 3D

    AUX RTN GND SHORT

    vehiclewaxberry/Space-Embodied-Robot-Complete

    航天服务星具身智能机械臂机器人 | Space Service Robot with Embodied Intelligence — mechanical, electrical & harness, power & thermal, and propulsion hardware design.

    15 parts2
  • 2 layers50 × 48 mmBACK ONLY LAYERSET, the printed circuit board in 3D

    BACK ONLY LAYERSET

    vehiclewaxberry/Space-Embodied-Robot-Complete

    航天服务星具身智能机械臂机器人 | Space Service Robot with Embodied Intelligence — mechanical, electrical & harness, power & thermal, and propulsion hardware design.

    2 parts2