
Diy
619 boardsKiCad boards from 201 GitHub repositories tagged “diy”, the most starred first; open any of them in PCBKit.
- 2 layers84 × 80 mm

- 2 layers145.3 × 108.8 mm

Level gate screamer
vermiscore/level-gate-screamer
Tube Screamer-style overdrive with a level gate: attenuates below threshold, boosts above
134 parts1MIT - 2 layers60 × 64 mm

Blueaudio puck
Zektopic/esp32-blue-audio-puck
Turn wired headphones wireless: an ESP32 Bluetooth audio receiver (A2DP sink) with I2S DAC output, parametric EQ, AVRCP remote control and battery-aware power management. Built on ESP-IDF v5.5.
50 parts1MIT - 2 layers21 × 20.9 mm

Battery pico
4f48/battery-pico
A battery charger add-on board for all Raspberry Pi Pico development boards.
14 partsCERN-OHL-S-2.0 - 4 layers188 × 128.3 mm

- 4 layers215.3 × 96.8 mm

Zak181
agkaminski/ZAK181
Improved ZAK180: DIY all-in-keyboard computer featuring Z180 and floppy drive.
123 parts - 2 layers141 × 59.7 mm

Electronics dice
andres-garcia-alves/electronics-dice
Arduino & PIC16F84A code for an electronic dice.
31 partsGPL-3.0 - 2 layers115.6 × 64.8 mm

Memory Game
andres-garcia-alves/electronics-memory-game
Arduino code for a 4 coloured memory game (Simon)
32 partsGPL-3.0 - 2 layers88.9 × 54.6 mm

Speaker Upgrade
andres-garcia-alves/electronics-speaker-upgrade
Speaker modernization to function as a semi-portable, independent device, separate from the original audio system.
35 partsGPL-3.0 - 2 layers17.8 × 25.4 mm

Tssop-20x6.5mmx4.4mm breakout
azasypkin/DIY
Schematics, gerbers, 3d models and CNC programs I make and use for small personal projects
6 partsMIT - 2 layers44.5 × 27.9 mm

- 2 layers50 × 50 mm

Soldering Sponge Automatic Water Dispenser
EECSB/Soldering-Sponge-Automatic-Water-Dispenser
ATtiny45-based device that keeps a soldering sponge moist automatically (3D-printed case + KiCad PCB + firmware).
23 partsUnlicense - 2 layers63.5 × 110 mm

Flashlight
Incomprehensible/Mad_Flashlight
Portable flashlight so powerful it can guide you in the dark as well as scare off the predators ☄️
76 parts - 2 layers280.9 × 76.8 mm

Retro clock
Incomprehensible/Mad_RetroClock
A stylish, soviet Nixie tubes-based stationary clock ✩ ⩇⩇:⩇⩇ ☾
105 partsApache-2.0 - 2 layers91.8 × 42.7 mm

Racktemperatur
klein0r/pcb-rack-temperature-control
Control fans in your rack depending on current temperature
28 partsMIT - 2 layers36.7 × 75.2 mm

Shifter
LMHDPRO/open-sequential-shifter
Rally Shifter Pro is a fully open DIY sim-racing sequential shifter based on a mechanical design sourced from GrabCAD.
3 parts - 2 layers20.3 × 20.3 mm

- 2 layers97 × 97 mm

Mm main pcba gen1-reva
MakaniMotion/mm-fan-gen1
Modular DIY fan platform based on PC fan hardware, 3D-printed parts and a simple control interface.
38 parts - 2 layers70 × 50 mm

Window vent ctrl
mmassico/window_air_vent
Sliding window air exchanger without heat recovery (3D models)
35 partsCERN-OHL-P-2.0 - 2 layers100 × 100 mm

Carrier
moinsen-dev/open-bed-climate
Open-source, local-first bed climate system: water-cooled/heated mat, standard parts, DIY kits, Home Assistant. Design phase.
126 partsApache-2.0 - 4 layers65 × 55 mm

Gateway
opensimgear/device-gateway
Work-in-progress STM32 Cyphal/CAN-to-USB gateway with automatic input/output enrollment, ordered HID controllers, guarded configuration/leased action/event routing and native/Pico debug simulation.
45 parts - 2 layers110 × 125 mm

Starter
opensimgear/device-template
Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.
113 parts - 2 layers76 × 66 mm

Radiator controller
Plokkke/sauter-marapi-esphome
ESPHome / Home Assistant pilot wire (fil pilote) controller for the Sauter Marapi tactile towel radiator — KiCad PCB, reverse engineering notes. Study phase, untested.
19 parts - 2 layers74 × 35.5 mm

Heater controller
Plokkke/viessmann-optolink-esphome
ESPHome / Home Assistant Optolink adapter for Viessmann Vitodens 222-W (Vitotronic 200 HO1B): DIY IR interface on an ESP32-C3, through-hole KiCad PCB with mains supply, 3D-printed enclosure.
10 partsMIT