Skip to the content

Diy

619 boards

KiCad boards from 201 GitHub repositories tagged “diy”, the most starred first; open any of them in PCBKit.

  • 2 layers55 × 55 mmPrismo, the printed circuit board in 3D

    Prismo

    nu31hackerspace/prismo

    Open-source $10 NFC/RFID door access controller for hackerspaces and makerspaces. ESP32-C3 + PN532, MQTT, Home Assistant, self-hosted

    29 parts39MIT
  • 2 layers26.9 × 73.9 mmWS2812ControllerEthernet, the printed circuit board in 3D

    WS2812ControllerEthernet

    klein0r/pcb-ws2812-ethernet-controller

    Ethernet Controller for WS2812 LED Stripes

    12 parts38MIT
  • 2 layers65.3 × 18.3 mmKlipper nano expander, the printed circuit board in 3D

    Klipper nano expander

    orobardet/klipper_nano_expander

    Klipper Nano Expander, an Arduino Nano Shield to be used as an auxiliary Klipper MCU

    39 parts35MIT
  • 2 layers337.4 × 120.5 mmKeyboard, the printed circuit board in 3D

    Keyboard

    overlordpro-sys/keycool84keyboard

    Building a Mechanical Keyboard From Scratch

    173 parts32MIT
  • 2 layers100 × 100 mmZ80VDP1B, the printed circuit board in 3D

    Z80VDP1B

    lynchaj/nhyodyne

    Modular Backplane Computer

    96 parts31
  • 2 layers83.8 × 72.4 mmVoice board, the printed circuit board in 3D

    Voice board

    Windfisch/analog-synth

    A low-cost semimodular analog synthesizer

    131 parts31GPL-3.0
  • 2 layers28 × 28 mmNikon gps, the printed circuit board in 3D

    Nikon gps

    4x1md/nikon_gps

    DIY GPS module for Nikon DSLR

    42 parts30MIT
  • 4 layersWatch, the printed circuit board in 3D

    Watch

    BenjaminSoelberg/elektronika-1

    A replacement module for the USSR vintage LED watch Elektronika-1 anno 1978

    19 parts30GPL-3.0
  • 2 layers124.5 × 77.5 mmAutopatzer, the printed circuit board in 3D

    Autopatzer

    jes/autopatzer

    Automatic chess board

    40 parts30
  • 2 layers99.6 × 87.6 mmRF ProtoBoard Extended, the printed circuit board in 3D

    RF ProtoBoard Extended

    maelh/radio-frequency-prototype-boards

    Radio frequency prototype boards (based on MegawattKS' design)

    12 parts30BSD-3-Clause
  • 2 layers56 × 110 mmTrs pcb, the printed circuit board in 3D

    Trs pcb

    Windfisch/midikraken

    A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.

    125 parts28
  • 2 layers64.8 × 109.2 mmTeensy eurorack, the printed circuit board in 3D

    Teensy eurorack

    newdigate/teensy-control-voltage

    Hardware Design: 16 channel analog control voltage shield for teensy 4.1; 8ch in / 8ch out; +-10V @ 16bits/sample;

    52 parts27MIT
  • 2 layers97.2 × 99.7 mm2D xmas tree01, the printed circuit board in 3D

    2D xmas tree01

    designer2k2/2d-xmas-tree

    a DIY flat christmas decoration with a ATtiny25, 20 led´s and a coin cell battery

    41 parts26MIT
  • 2 layers73.1 × 18.3 mmRJ10Adapter, the printed circuit board in 3D

    RJ10Adapter

    klein0r/pcb-ttl-ftdi-esp-adapter

    PCB to connect a TTL reader either to an FTDI or ESP12-E/F (WiFi)

    16 parts25MIT
  • 2 layers66.1 × 33 mmPicoprobe pcb, the printed circuit board in 3D

    Picoprobe pcb

    tjko/tiny-picoprobe

    Tiny PicoProbe PCB

    6 parts25GPL-3.0
  • 2 layers52.5 × 37.5 mmNeutrino display, the printed circuit board in 3D

    Neutrino display

    the-openary/neutrino

    A cheap, accessible 3D printer that fits in a filament box! By @qcoral

    7 parts24MIT
  • 2 layers50 × 36 mmSNAC2IEC Breakout, the printed circuit board in 3D

    SNAC2IEC Breakout

    venice1200/MiSTer_SNAC2IEC

    Commodore/CBM IEC Adapter for MiSTer FPGA

    28 parts21GPL-3.0
  • 2 layers120.7 × 70.6 mmPicoFX, the printed circuit board in 3D

    PicoFX

    dj505/PicoFX

    A compact keyboard-style controller for Pump it Up

    52 parts20GPL-3.0
  • 4 layers73.7 × 36.8 mmSrx card, the printed circuit board in 3D

    Srx card

    synthtools/opensrxcard

    open source srx card + programmer

    21 parts20CERN-OHL-S-2.0
  • 2 layers51.7 × 29.2 mmAVR LORA-805, the printed circuit board in 3D

    AVR LORA-805

    tomtor/STM32-RFM95-PCB

    STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip

    39 parts20GPL-3.0
  • 2 layers70 × 35 mmProgrammer, the printed circuit board in 3D

    Programmer

    Cuprum77/PawPad

    PawPad programming header

    19 parts18CERN-OHL-W-2.0
  • 2 layers157.8 × 119.6 mmPrototype, the printed circuit board in 3D

    Prototype

    exul/keyboards

    The files in this repository are meant as inspiration for others who want to build a keyboard from scratch as well.

    46 parts18CERN-OHL-P-2.0
  • 2 layers54.4 × 37 mmOsaCan, the printed circuit board in 3D

    OsaCan

    OSATeam-GitHub/Project-OSA-CanSat-2020-2021

    Minisatellite in the size of a can that takes air samples while falling.

    22 parts18GPL-3.0
  • 2 layers56.5 × 22.2 mmUpdifier, the printed circuit board in 3D

    Updifier

    Dlloydev/Updi-Key

    This DIY open source hardware connects inline with any UPDI programmer to provide a HV UPDI programming solution for tinyAVR® 0/1/2 series MCUs.

    36 parts15MIT