Skip to the content

Cvbs

10 boards

KiCad boards from 4 GitHub repositories tagged “cvbs”, the most starred first; open any of them in PCBKit.

  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY V2, the printed circuit board in 3D

    C5VRX JACK DIY V2

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    18 parts515GPL-3.0
  • 4 layers150 × 90 mmMisrc v2.5-rounded, the printed circuit board in 3D

    Misrc v2.5-rounded

    Stefan-Olt/MISRC

    MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.

    328 parts236CC-BY-4.0
  • 2 layers37.2 × 16.4 mmRgb2svideo, the printed circuit board in 3D

    Rgb2svideo

    UzixLS/rgb2svideo

    Converts RGB + Sync analog signal to S-Video (and also Composite).

    42 parts14MIT
  • 2 layers51.5 × 104.1 mmAnalog Video Comb Filter, the printed circuit board in 3D

    Analog Video Comb Filter

    goscickiw/Analog-Video-Comb-Filter

    Analog Composite Video to S-Video comb filter board using SAA4960, SAA4961 or SAA4963 integrated circuit

    82 parts9CC-BY-SA-4.0
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY V3, the printed circuit board in 3D

    C5VRX JACK DIY V3

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    18 parts515GPL-3.0
  • 2 layers54.4 × 49.3 mmFx3 tn20k adapter, the printed circuit board in 3D

    Fx3 tn20k adapter

    Stefan-Olt/MISRC

    MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.

    44 parts236CC-BY-4.0
  • 2 layers146.2 × 72.6 mmMisrc v1.5a, the printed circuit board in 3D

    Misrc v1.5a

    Stefan-Olt/MISRC

    MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.

    194 parts236CC-BY-4.0
  • 4 layers32 × 16 mmRgb2svideo, the printed circuit board in 3D

    Rgb2svideo

    UzixLS/rgb2svideo

    Converts RGB + Sync analog signal to S-Video (and also Composite).

    29 parts14MIT
  • 2 layers16 × 20 mmRgb2svideo, the printed circuit board in 3D

    Rgb2svideo

    UzixLS/rgb2svideo

    Converts RGB + Sync analog signal to S-Video (and also Composite).

    30 parts14MIT