Assembly

58 boards

KiCad boards from 19 GitHub repositories tagged “assembly”, the most starred first; open any of them in PCBKit.

2 layers162.2 × 126.5 mm
Redox rev1
mattdibi/redox-keyboard
Ergonomic split mechanical keyboard
86 parts2kMIT
2 layers99.1 × 49.9 mm
TMS9918
jblang/TMS9918A
TMS9918A video card for RC2014
36 parts145
2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0
4 layers93.3 × 60.3 mm
Arduino 386EX V5
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
56 parts114
2 layers99.7 × 64 mm
MSXPi
costarc/MSXPi
Interface for MSX to Connect and use Raspberry Pi resources
42 parts92MIT
4 layers43.6 × 17.4 mm
Dcdc
buganini/Kikakuka
Kikakuka — KiCad Workspace, Panelization, Build Variants, Differ & FreeCAD PCB Bending and Assembly
12 parts81MIT
2 layers150 × 100 mm
Test1
MakerPnP/makerpnp
PCB assembly software for Makers, including planning, pick-and-place and gerber viewing.
8 parts50
2 layers76.2 × 147.3 mm
AriCalculator RevC
hotwolf/AriCalculator
A homemade pocket calculator
513 parts15GPL-3.0
4 layers170 × 130 mm
Z80Atmega128
46nori/Z80Atmega128
Real Z80A system with I/O emulated by AVR(ATmega128)
109 parts9GPL-3.0
2 layers50.8 × 50.8 mm
DC2026 LASIR
CmdrZin/chips_avr_examples
AVR assembly and C code for robotics and other projects.
38 parts6MIT
2 layers323.8 × 91.1 mm
XPL-32-rounded
liaminventions/XPL-32
All of the code and experiments for the XPL-32 Homebrew 6502 Laptop. Licensed under GNU GPL V3.
81 parts4GPL-3.0
2 layers74.9 × 110.5 mm
Wz80-io
makesthingsxyz/wz80
A z80 based computer.
22 parts3MIT
2 layers40.2 × 57.5 mm
Proj 7
Rbara00/Rob-Bara-College-Coding-Portfolio
Robert Bara's Electrical Engineering College portfolio
29 parts2
2 layers
EPROM Prog PS
AebrahmRamos/M68HC11-EPROM-Programmer
This project implements an EPROM reader using the M68HC11 microcontroller and a 2764 EPROM chip. The system reads the first 25 bytes of data stored in the EPROM and transmits it to a host computer via serial…
25 parts1
2 layers124 × 113 mm
Control board
edatki/e74-cpu
A custom CPU implemented in 74-series logic
99 parts
2 layers50 × 50 mm
MagniCube RevA
hotwolf/MagniCube
A 4x4x4 LED cube driven by a NXP MagniV MCU
136 parts
2 layers80 × 100 mm
P2000t slot2-datacartridge
ifilot/p2000t-tape-monitor
P2000T cartridge software for reading out tapes and copying them to external rom chip
28 parts
2 layers160 × 100.3 mm
Peix
pozsarzs/zacchaeus
8-bit microcomputer built from commercially available and home-built components
884 partsEUPL-1.2
2 layers60.8 × 90.3 mm
PI make
webertom6/pi-protobot
Mobile robot capable of autonomously navigating while avoiding obstacles and dead ends
49 partsMIT
2 layers96.2 × 55.9 mm
Ard8088
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
14 parts114
2 layers129.5 × 57.1 mm
Arduino 286 5V
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
35 parts114
4 layers92.7 × 59.7 mm
Arduino 286 V3
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
51 parts114
2 layers102.9 × 57.1 mm
Arduino 386
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
20 parts114
2 layers135.9 × 59.1 mm
Arduino 386 387
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
54 parts114