2 layers50.9 × 22.9 mm
FeatherWing nRF24L01 Adapter
rfquack/RFQuack
RFQuack: the versatile RF-analysis tool that quacks!
14 parts348GPL-2.0
Arduino library
24 boardsKiCad boards from 15 GitHub repositories tagged “arduino-library”, the most starred first; open any of them in PCBKit.
- 2 layers147.8 × 133.6 mm
PICO DEV M3 KEYPAD
ahmsville/Magnetic_rotary_encoding
A library for setting up magnetic rotary encoding in C/C++ & MicroPython, The library also features a haptics controller which allows you to connect and control a vibration motor as a step count haptic feedback.
50 parts131GPL-3.0 - 2 layers45.7 × 40.6 mm
- 2 layers88 × 17.1 mm
Core v1
windnerd-labs/Windnerd-Core
WindNerd Core Wind Sensor Board - Hardware, software and documentation
28 parts10 - 2 layers80 × 100 mm
DIY AM FM Radio Receiver with CXA1019S
TeknoTrek/DIY-AM-FM-Radio-Receiver-with-CXA1019S
This repo contains open-source KiCad PCB designs for a DIY AM/FM radio receiver using the Sony CXA1019S IC. Perfect for electronics beginners! 🔹 Key Features: Dual-band (AM+FM) receiver schematic Optimized PCB…
48 parts9 - 2 layers95.5 × 104.6 mm
FmRadio
TeknoTrek/Arduino-Nano-FM-Radio-Si4703
Part of the Teknotrek YouTube channel, this repository includes KiCad files for an FM Radio project using Arduino Nano, Si4703, and other components.
16 parts7 - 2 layers61 × 40.6 mm
UB AT328 proto
danko-david/uartbus
A library that turns microcontroller's UART peripheral to a simple, multi-master bus system. The project also features an RPC library for a microcontroller, device auto-discovery, code upload, gateway between the bus…
32 parts6MIT - 2 layers98.8 × 97.4 mm
NeOSensorV4 panel
fthiebolt/neOCampus-arduino
neOCampus Arduino | home of the neOSensors end-devices
278 parts5 - 2 layers23 × 23 mm
MA7xx Breakout
motionlayer/MA702-Breakout-Board
MA702 examples with PlatformIO and breakout schematics
12 parts4MIT - 2 layers50 × 50 mm
- 2 layers73 × 48 mm
Berg wire jumper extender
nandanghawate/arduino-atmega328-custom-hw-sw-projects-NG
This will be / is the collection of sample circuits, PCB layouts, codes and libraries that I will create during the process of exploring ATMEGA328, Arduino - Uno, Nano, Mini
19 parts2 - 2 layers153.7 × 109.2 mm
I2c sensor breakout pcb
ImogenWren/i2c-arduino-daq
Arduino interface for i2c sensors with Serial CSV output for use with Data Aquisition Software
79 parts1 - 2 layers58.4 × 61 mm
Serial programmer
PegLegDino/Roku_IR_Controller
This is a literally just an infrared remote, might add a youtube video later.
22 parts1MIT - 4 layers83 × 120 mm
- 2 layers139.6 × 70 mm
Quectel LC76G
ugo-silato/Quectel_LCx6G_GNSS
Driver for Quectel LC26G, LC26G-T, LC76G and LC86G GNSS modules (GPS, GLONASS, Galileo, BeiDou, QZSS): NMEA, PAIR/PQTM commands, UART or I2C. Tested on LC76G with Arduino Uno R3 and R4.
53 partsMIT - 2 layers
Huzzah cc112x shield
rfquack/RFQuack
RFQuack: the versatile RF-analysis tool that quacks!
6 parts348GPL-2.0 - 2 layers87.6 × 83.8 mm
Pi Pico Stepper controller
ahmsville/Magnetic_rotary_encoding
A library for setting up magnetic rotary encoding in C/C++ & MicroPython, The library also features a haptics controller which allows you to connect and control a vibration motor as a step count haptic feedback.
25 parts131GPL-3.0 - 2 layers17.8 × 33 mm
- 2 layers200 × 80 mm
- 2 layers49.5 × 49.5 mm
NeOsensor LoRaWANV2
fthiebolt/neOCampus-arduino
neOCampus Arduino | home of the neOSensors end-devices
35 parts5 - 2 layers49.5 × 49.5 mm
NeOSensorV5
fthiebolt/neOCampus-arduino
neOCampus Arduino | home of the neOSensors end-devices
53 parts5 - 2 layers99.9 × 99.9 mm
NeOSensorv5 panelized
fthiebolt/neOCampus-arduino
neOCampus Arduino | home of the neOSensors end-devices
212 parts5 - 2 layers49 × 35.4 mm
- 2 layers22.1 × 14.2 mm
