Skip to the content
2 layers17.8 × 33 mmMiniCAN, the printed circuit board in 3D

Arduino System Bus

Size
17.8 × 33 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
38
Pads
74
Tracks, vias
221, 15
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
11 May 2015
Updated
14 Jun 2024

Overview

MiniCAN is an open-source printed circuit board by adlerweb, from the adlerweb/asysbus repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 17.8 × 33 mm with 13 parts on 38 nets, routed with 221 tracks and 15 vias.

It is built around the MCP2515-I. Its parts include 4 capacitors, 3 connectors, 2 resistors, 2 ICs and 1 transistor. It belongs with the home automation and IoT and interfaces and adapters boards of this library.

Main components

1

README

README.md

aSysBus - The Arduino System Bus

aSysBus is hard- and software to build a network of arduino nodes using a CAN-bus or other interfaces. It was build as a replacement for iSysBus(DE), which used native AVR code and a java based configuration framework instead of Arduino. It is mostly used for home automation and other control communication.

For CAN communication Seeed-Studio/CAN_BUS_Shield is required. Be aware the library frequently breaks backwards compatibility. As time of writing master should work, if problems occur look for a commit close to a commit of this library and file a bug here.

Take a look around the wiki to learn more about the protocol, the included examples should help to get you started. If you speak german there are several videos over at YouTube.

Parts

13
QtyValueFootprintReferences
2100nFCapacitors_SMD:C_0603_HandSolderingC1, C4
222pFCapacitors_SMD:C_0805_HandSolderingC2, C3
2CONN_12Pin_Headers:Pin_Header_Straight_1x12P1, P2
1120ΩResistors_SMD:R_0805_HandSolderingR2
1160mAFuse_Holders_and_Fuses:Fuse_SMD1206_HandSolderingF1
116MHz/4MHzCrystals:Crystal_HC49-SD_SMDQ1
182kΩResistors_SMD:R_0805_HandSolderingR1
1MCP2515Housings_SOIC:SOIC-18_7.5x11.6mm_Pitch1.27mmIC1
1PCA 82C25xPower_Integrations:SO-8IC2
1WAGO_233_504Sockets_WAGO734:WAGO_233-504P3

More from adlerweb/asysbus

1
  • 2 layers45.7 × 40.6 mmMiniDIO, the printed circuit board in 3D

    MiniDIO

    adlerweb/asysbus

    Arduino System Bus

    23 parts27GPL-3.0

Similar boards

  • 2 layers105.4 × 67.6 mmCarpc, the printed circuit board in 3D

    Carpc

    festlv/carpc

    RaspberryPi based CarPC build, to replace stock Volvo navigation system

    51 parts55
  • 4 layers108 × 54 mmMCU Powertrain, the printed circuit board in 3D

    MCU Powertrain

    mark-belbin/motor-controller

    Custom FOC motor controller designed for underwater robotics.

    163 parts43GPL-3.0
  • 4 layers85 × 56 mmV link hat, the printed circuit board in 3D

    V link hat

    BoostedMoose/v-link-hat

    Official repository of the V-Link HAT

    96 parts6
  • 2 layers49.8 × 63.2 mmEdgeberry console cartridge, the printed circuit board in 3D

    Edgeberry console cartridge

    Edgeberry/Edgeberry-HWCartridge-ConsoleCAN

    An Edgeberry Hardware Cartridge with a CAN-bus interface and USB console access

    88 parts4CERN-OHL-W-2.0
  • 2 layers140 × 90 mmMetaldetector, the printed circuit board in 3D

    Metaldetector

    sharst/metaldetector-shield

    Hardware and Software for a custom build metaldetector + pressure sensing shield

    149 parts4LGPL-3.0
  • 2 layers155 × 78 mm4F5LCD, the printed circuit board in 3D

    4F5LCD

    Code99it/4F5LCD

    88 parts3
  • 2 layers62.5 × 42.5 mmEGTtoCANBus Module, the printed circuit board in 3D

    EGTtoCANBus Module

    LogicZWorks/1CH-EGT-to-CAN-BUS-MODULE

    40 parts2
  • 2 layers150 × 100 mmEngineManagementSimpleWithMosfets, the printed circuit board in 3D

    EngineManagementSimpleWithMosfets

    ieb/EngineManagement

    Replacement engine electronics for a Volvo Penta D2-40 and other MDI based engines.

    151 parts1

Questions

How big is the MiniCAN PCB?

It measures 17.8 × 33 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MiniCAN use?

13 parts, built around the MCP2515-I. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MiniCAN KiCad files?

From the adlerweb/asysbus repository on GitHub, at the commit this page was made from: the board is hardware/promini-CAN/MiniCAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MiniCAN design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).