Skip to the content
PCBKitNew board
2 layers72.2 × 33.9 mmBoostUnit, the printed circuit board in 3D

BoostUnit

senrobo/open

 . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

Open in PCBKitView on GitHub.kicad_pcb
Size
72.2 × 33.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
13
Pads
77
Tracks, vias
39, 4
Pours
22
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
31 Jul 2024
Updated
11 Apr 2026

Overview

BoostUnit is an open-source printed circuit board by senrobo, from the senrobo/open repository on GitHub, published under the MIT licence. It is a 2-layer board of 72.2 × 33.9 mm with 26 parts on 13 nets, routed with 39 tracks and 4 vias.

It is built around the LM2587S-ADJ, ISC011N06LM5ATMA1 and SS510.

Main components

3

README

README.md

open

Project Structure

 . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DS_Store │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │ ├──  Crystal.step │ │ ├──  'crystal 8MHz.stp' │ │ ├──  DFN08L_5X6A.step │ │ ├──  IRLML6344TRPBF.stp │ │ ├──  led0603.step │ │ ├──  led2835.stp │ │ ├──  LM2587S.stp │ │ ├──  NCP81074AMNTBG.stp │ │ ├──  PESD3V3Y1BSFYL.stp │ │ ├──  PowSO30-ST.step │ │ ├──  R0603.step │ │ ├──  'Seeed Studio XIAO-ESP32-C3.step' │ │ ├──  SS5X.stp │ │ ├──  SS12D00G3.stp │ │ ├──  STP75NF75.step │ │ ├──  SW_PUSH_SPST.step │ │ ├──  teensy4.step │ │ ├──  TO-220-3_Vertical.step │ │ ├──  TO-252.step │ │ ├──  XT30UPB-F.step │ │ └──  XT60UPB-M.step │ ├──  activation.kicad_sch │ ├──  boost-switch.kicad_sch │ ├──  boost.kicad_sch │ ├──  cao.pcb3d │ ├──  connections.kicad_sch │ ├──  fp-info-cache │ ├──  l1.kicad_pcb │ ├──  l1.kicad_prl │ ├──  l1.kicad_pro │ ├──  l1.kicad_sch │ ├──  l1.step │ ├──  led.kicad_sch │ ├──  lightring.kicad_sch │ ├──  miscellaneous.kicad_sch │ ├──  motordriver.kicad_sch │ ├──  mux.kicad_sch │ ├──  Power.kicad_sch │ ├──  stm32.kicad_sch │ ├──  sym-lib-table │ └──  ~l1.kicad_sch.lck ├──  processingUnit │ ├──  3dmodels │ │ ├──  'Adafruit BNO085.step' │ │ ├──  OPENMVRT1062.STEP │ │ ├──  R0603.step │ │ ├──  'Seeed Studio XIAO-ESP32-C3.step' │ │ ├──  SS12D00G3.stp │ │ └──  teensy4.step │ ├──  l3.pretty │ │ ├──  bno085.kicad_mod │ │ ├──  cap0603.kicad_mod │ │ ├──  led0603.kicad_mod │ │ ├──  OpenMV_RT.kicad_mod │ │ ├──  res0603.kicad_mod │ │ ├──  'SEN Logo Mini.kicad_mod' │ │ ├──  SS12D00G3.kicad_mod │ │ ├──  'Teensy 4.0.kicad_mod' │ │ └──  xiao-esp32c3.kicad_mod │ ├──  2024l3.step │ ├──  fp-info-cache │ ├──  fp-lib-table │ ├──  l3.kicad_pcb │ ├──  l3.kicad_prl │ ├──  l3.kicad_pro │ └──  l3.kicad_sch ├──  .gitignore ├──  LICENSE └──  README.md

Parts

26
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4
20u1Library:cap0603BC1, BC3
2100Library:res0603BSR2, BSR3
2Conn_02x03_Counter_ClockwiseConnector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ1, J2
2XT30Library:AMASS_XT30PW-F_1x02_P2.50mm_HorizontalBJ1, BSJ1
10.1uLibrary:res0603BSC1
1100uCapacitor_SMD:CP_Elec_8x6.5BC2
11K5Library:res0603BR3
11N5401Diode_THT:D_DO-201AD_P15.24mm_HorizontalBSD1
11n5Library:cap0603BSC2
11uLibrary:cap0603BC4
120RLibrary:res0603BSR1
12k94Library:res0603BR2
157KLibrary:res0603BR1
168uHLibrary:1040 One Piece InductorBL1
1ISC011N06LM5ATMA1Library:8-DFN (5x6)BSQ1
1LM2587S-ADJLibrary:TO170P1435X465-6NBIC1
1NCP81074AMNTBGPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmBSU1
1SS510Library:SMA (DO-214AC)BD1

Questions

How big is the BoostUnit PCB?

It measures 72.2 × 33.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BoostUnit use?

26 parts, built around the LM2587S-ADJ, ISC011N06LM5ATMA1 and SS510. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BoostUnit KiCad files?

From the senrobo/open repository on GitHub, at the commit this page was made from: the board is supplyUnit/boostUnit/boostUnit.kicad_pcb and its schematic breakout/Cam Adapter/Cam Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BoostUnit design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

More from senrobo/open

9
  • 2 layers150 × 160.8 mmProcessingUnit, the printed circuit board in 3D

    ProcessingUnit

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    136 partsMIT
  • 2 layers126.4 × 112 mmOpen, the printed circuit board in 3D

    Open

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    127 partsMIT
  • 2 layers118 × 118 mmCamUnit new, the printed circuit board in 3D

    CamUnit new

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    34 partsMIT
  • 2 layers72.2 × 33.9 mmBuckUnit, the printed circuit board in 3D

    BuckUnit

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    25 partsMIT
  • 2 layers72.2 × 33.9 mmCapacitor Bank, the printed circuit board in 3D

    Capacitor Bank

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    9 partsMIT
  • 2 layers9.1 × 18.8 mmEmmiter, the printed circuit board in 3D

    Emmiter

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    5 partsMIT
  • 2 layers9.1 × 18.8 mmLED, the printed circuit board in 3D

    LED

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    3 partsMIT
  • 2 layers9.1 × 18.8 mmLDR, the printed circuit board in 3D

    LDR

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    2 partsMIT
  • 2 layers9.1 × 18.8 mmReceiver, the printed circuit board in 3D

    Receiver

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    2 partsMIT

Similar boards

  • 2 layers206 × 197.4 mmLine 3.0, the printed circuit board in 3D

    Line 3.0

    hughminhphan/PROJECTS

    My projects

    100 parts
  • 4 layers116 × 112 mmBldc esc, the printed circuit board in 3D

    Bldc esc

    EwoudVV/bldc-esc

    A custom STM32 motor controller for BLDC and PMSM motors.

    453 parts2
  • 2 layers76.7 × 35.3 mmPD Board, the printed circuit board in 3D

    PD Board

    SubodhBawankar/pdb-vishwa

    Power Distribution Board for Vishwa Rover 2024

    50 parts1
  • 2 layers200 × 100 mmAmp600w, the printed circuit board in 3D

    Amp600w

    mx-yah/amp600w

    A high-performance high-power class-D amplifier that enables true premium sound quality with high-efficiency class-D technology

    133 parts6
  • 2 layers108 × 110 mmBms active hw, the printed circuit board in 3D

    Bms active hw

    NGOQUOC98/ESP32_PCB

    136 parts1
  • 2 layers71.9 × 99.1 mmInverter, the printed circuit board in 3D

    Inverter

    Abi613/ESC

    3 phase motor bldc driver

    82 parts
  • 2 layers79.3 × 59.8 mmController, the printed circuit board in 3D

    Controller

    Anderman/Renovent

    Display is een liteon De 8 segementen worden in volgorde aan gestuurd met een freq van 500uS Welke segmenten verlicht worden gaat met digit 1 - 4

    74 parts