
ProcessingUnit
senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…
CamUnit new is an open-source printed circuit board by senrobo, from the senrobo/open repository on GitHub, published under the MIT licence. It is a 2-layer board of 118 × 118 mm with 34 parts on 146 nets, routed with 250 tracks and 15 vias.
It is built around the BNO085. Its parts include 6 capacitors, 6 resistors, 5 ICs, 5 connectors and 4 switches. It belongs with the ESP32 and RISC-V boards of this library.
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DS_Store │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │ ├── Crystal.step │ │ ├── 'crystal 8MHz.stp' │ │ ├── DFN08L_5X6A.step │ │ ├── IRLML6344TRPBF.stp │ │ ├── led0603.step │ │ ├── led2835.stp │ │ ├── LM2587S.stp │ │ ├── NCP81074AMNTBG.stp │ │ ├── PESD3V3Y1BSFYL.stp │ │ ├── PowSO30-ST.step │ │ ├── R0603.step │ │ ├── 'Seeed Studio XIAO-ESP32-C3.step' │ │ ├── SS5X.stp │ │ ├── SS12D00G3.stp │ │ ├── STP75NF75.step │ │ ├── SW_PUSH_SPST.step │ │ ├── teensy4.step │ │ ├── TO-220-3_Vertical.step │ │ ├── TO-252.step │ │ ├── XT30UPB-F.step │ │ └── XT60UPB-M.step │ ├── activation.kicad_sch │ ├── boost-switch.kicad_sch │ ├── boost.kicad_sch │ ├── cao.pcb3d │ ├── connections.kicad_sch │ ├── fp-info-cache │ ├── l1.kicad_pcb │ ├── l1.kicad_prl │ ├── l1.kicad_pro │ ├── l1.kicad_sch │ ├── l1.step │ ├── led.kicad_sch │ ├── lightring.kicad_sch │ ├── miscellaneous.kicad_sch │ ├── motordriver.kicad_sch │ ├── mux.kicad_sch │ ├── Power.kicad_sch │ ├── stm32.kicad_sch │ ├── sym-lib-table │ └── ~l1.kicad_sch.lck ├── processingUnit │ ├── 3dmodels │ │ ├── 'Adafruit BNO085.step' │ │ ├── OPENMVRT1062.STEP │ │ ├── R0603.step │ │ ├── 'Seeed Studio XIAO-ESP32-C3.step' │ │ ├── SS12D00G3.stp │ │ └── teensy4.step │ ├── l3.pretty │ │ ├── bno085.kicad_mod │ │ ├── cap0603.kicad_mod │ │ ├── led0603.kicad_mod │ │ ├── OpenMV_RT.kicad_mod │ │ ├── res0603.kicad_mod │ │ ├── 'SEN Logo Mini.kicad_mod' │ │ ├── SS12D00G3.kicad_mod │ │ ├── 'Teensy 4.0.kicad_mod' │ │ └── xiao-esp32c3.kicad_mod │ ├── 2024l3.step │ ├── fp-info-cache │ ├── fp-lib-table │ ├── l3.kicad_pcb │ ├── l3.kicad_prl │ ├── l3.kicad_pro │ └── l3.kicad_sch ├── .gitignore ├── LICENSE └── README.md
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2u2 | Library:cap0603 | C1, C2, C5, C6 |
| 4 | Conn_01x06 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J2, J3, J4, J5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | SW_SPDT | Library:SS12D00G3 | SW1, SW2, SW3, SW4 |
| 2 | 100R | Library:fb0805 | FB1, FB2 |
| 2 | 10K | Library:res0603 | R1, R2 |
| 2 | 1K | Library:res0603 | R4, R5 |
| 2 | 470 | Library:res0603 | R3, R6 |
| 2 | xiao-esp32c3 | Library:xiao-esp32c3 | U3, U5 |
| 1 | 0U1 | Library:cap0603 | C4 |
| 1 | 2U2 | Library:cap0603 | C3 |
| 1 | 3V PWR | Library:led0603 | D2 |
| 1 | 5V PWR | Library:led0603 | D1 |
| 1 | BNO085 | Library:bno085 | U2 |
| 1 | Conn_01x06 | Connector_JST:JST_XH_S6B-XH-A_1x06_P2.50mm_Horizontal | J1 |
| 1 | Teensy 4.0 | Library:Teensy 4.0 | U4 |
| 1 | ~ | Library:OpenMV_RT | U1 |

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

senrobo/open
. │ ├── l1 │ ├── 3dmodels │ │ ├── .DSStore │ │ ├── 0603Inductor.step │ │ ├── 1040Inductor.step │ │ ├── ALS-PT19.step │ │ ├── C0603.step │ │ ├── CAPPRD750W80D1600H2500.stp │ │ ├── CD74HC4067M.step │ │…

AFS-pt/PROMETHEUS-1
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1


rishivg/IO-SDR
Open-Source software-defined FPGA radio hardware platform




codinga593/IRIS
A next generation model rocket focused on a precise propulsive landing on a tower.
It measures 118 × 118 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the BNO085. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the senrobo/open repository on GitHub, at the commit this page was made from: the board is camUnit/camUnit-new.kicad_pcb and its schematic breakout/Cam Adapter/Cam Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).