
SLI HW
dgramop/SLI-HW
Hardware files for Oakton High School's entry into NASA's Student Launch Initiative

Code for Robocup Junior Rescue Maze 2024
Kicad RCJ is an open-source printed circuit board by edrobotics, from the edrobotics/rescue_maze_2024 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 115.8 × 160.2 mm with 84 parts on 138 nets, routed with 1,437 tracks and 200 vias.
It is built around the DRV8874PWP, TCS34725FN and BNO085, with the ICM20948 and WS2812 among its other parts. Its parts include 29 connectors, 19 ICs, 10 resistors, 6 diodes and 5 switches.
Repository for ED Robotics' participation in the Robocup Junior Rescue Maze 2024 competition.
The contents of this repository were used in RoboCup Junior SM (Swedish Championships) 2024.
The code and CAD models are provided as-is, without any additional work done after the competition. The code (and hardware) did not work as expected, so keep that in mind.
Minimum Viable Product is a good idea that probably should have been prioritised more.
This was our second year doing robotics. The code may contain trace amounts of spaghetti.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R? | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R6, R8, R10, R12, R13, R14 |
| 8 | VL53L0/1X | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | U12, U13, U14, U15, U16, U17, U18, U25 |
| 7 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7 |
| 4 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J24, J25, J26, J27 |
| 4 | DRV8874 | RCJ2024_kicad_footprints:DRV8874 | U1, U2, U3, U4 |
| 4 | bump | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | S1, S2, S3, S4 |
| 4 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | D3, D4, D5, D6 |
| 4 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | M1, M2, M3, M4 |
| 2 | WS2812 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | D7, D8 |
| 1 | APDS9960 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | U24 |
| 1 | BNO085 | RCJ2024_kicad_footprints:BNO085 | U20 |
| 1 | Conn_01x01_LOP | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J7 |
| 1 | Conn_01x02_3.3V | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J29 |
| 1 | Conn_01x02_3V3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Conn_01x02_5V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Conn_01x02_5V | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J28 |
| 1 | Conn_01x02_I2C1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Conn_01x02_LSM5DSOX_LIS3MDL_extra | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J22 |
| 1 | Conn_01x02_colsens_interrupt | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J15 |
| 1 | Conn_01x03_IO_expander_interrupts_extra | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04_M1_extra | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J10 |
| 1 | Conn_01x04_M2_extra | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J11 |
| 1 | Conn_01x04_M3_extra | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J12 |
| 1 | Conn_01x04_M4_extra | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J13 |
| 1 | Conn_01x05_photoresistors | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J30 |
| 1 | Conn_01x06_BNO085_extra | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J20 |
| 1 | Conn_01x06_IMU_extra | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_ISM20948_extra | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J21 |
| 1 | Conn_01x06_LED | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J9 |
| 1 | Conn_01x06_teensy_left_extra | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J14 |
| 1 | Conn_01x07_IO_expander_extra | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J16 |
| 1 | Conn_02x03_I2C | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J17 |
| 1 | Conn_02x05_3V3_GND | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J18 |
| 1 | Conn_02x05_5V_GND | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J19 |
| 1 | ICM20948 | RCJ2024_kicad_footprints:ICM2049 | U21 |
| 1 | LOGO | LOGO | G*** |
| 1 | LSM6DSOX+LIS3MDL | RCJ2024_kicad_footprints:LSM6DSOX+LIS3MDL | U22 |
| 1 | SW_LOP | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | S5 |
| 1 | Servo1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M5 |
| 1 | Servo2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M6 |
| 1 | TCS34725 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | U23 |
| 1 | VBAT_meas_conn | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J23 |
| 1 | ~ | RCJ2024_kicad_footprints:Teensy_41 | U6 |
| 1 | ~ | RCJ2024_kicad_footprints:IO_Expander_nopower | U19 |
The 83 most common of 84 parts.

dgramop/SLI-HW
Hardware files for Oakton High School's entry into NASA's Student Launch Initiative





NicolasFavero/AutonomousAircraftControlSystem
Embedded flight control and telemetry system for an autonomous aircraft prototype based on ESP32-S3.

Llamero/Light_Color_and_Intensity_Datalogger
Measures temperature, pressure, humidity, intensity and color of light and saves it to an SD card

It measures 115.8 × 160.2 mm and has 2 copper layers, 1.6 mm thick.
84 parts, built around the DRV8874PWP, TCS34725FN, BNO085 and ICM20948. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the edrobotics/rescue_maze_2024 repository on GitHub, at the commit this page was made from: the board is Hardware/Electronics/kicad_RCJ/kicad_RCJ.kicad_pcb and its schematic Hardware/Electronics/kicad_RCJ/kicad_RCJ.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).