4 layers170 × 90 mm
2 layers74 × 32 mm
ColorSensor01
nevzathipertek/color_sensor1- Size
- 74 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 88
- Pads
- 274
- Tracks, vias
- 667, 59
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Jul 2024
- Updated
- 17 Jul 2024
Overview
ColorSensor01 is an open-source printed circuit board by nevzathipertek, from the nevzathipertek/color_sensor repository on GitHub. It is a 2-layer board of 74 × 32 mm with 99 parts on 88 nets, routed with 667 tracks and 59 vias.
It is built around the STM32F103CBT6, SN65HVD230D and TCS34725FN, with the TPS54331DDAR, LTV-817S and MMBT3904 among its other parts. Its parts include 33 resistors, 9 capacitors, 6 ICs, 6 connectors and 3 diodes. It belongs with the STM32 boards of this library.
Main components
11
STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
TCS34725FN
SMD-6P-30℃~+70℃ 16bit 2.4mm 2.7V~3.6V 235uA 2mm Color Recognition I2C Low power/sleep mode、Spectral correction/filtering、Adjustable gain control、Interrupt/event trigger Red, Green, Blue, Transparent SMD-6P Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light Sensors
TPS54331DDAR
SOIC-8-EP-40℃~+150℃@(TJ) 1 3.5V~28V 3A 570kHz 800mV~25V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
LTV-817S
SMD-4P-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
100UF/35V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorised
IRFR024PBF
DPAK(TO-252)-55℃~+150℃ 1 N-channel 100mΩ@10V 14A 25nC@10V 360pF 42W 4V 60V 640pF 79pF N-Channel DPAK(TO-252) MOSFETs ROHSVishay IntertechnologyMOSFETsNUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesUS1M
SMA-55℃~+150℃ 1 Independent 1.65V@1A 1A 1kV 30A 5uA@1kV 75ns SMA Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency Diodes
README
README.mdColor Sensor
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LED | LED_SMD:LED_PLCC_2835 | Ld1, Ld2, Ld3, Ld4, Ld5, Ld6, Ld7, Ld8, Ld9, Ld10, Ld11, Ld12 |
| 10 | 10K | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 |
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 9 | 220 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 5 | 3.3K | Resistor_SMD:R_0603_1608Metric | R20, R21, R22, R23, R24 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | H3, H4, H5, H6 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R30, R31 |
| 2 | 100pF | Capacitor_SMD:C_0603_1608Metric | 1c2, 1c3 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | 10C1, 10C2 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | 22c1, 22c2 |
| 2 | 30K | Resistor_SMD:R_0603_1608Metric | R25, R26 |
| 2 | 330K | Resistor_SMD:R_0603_1608Metric | R28, R29 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | 4C1, 4C2 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric | 47C1, 47C2 |
| 2 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U5, U6 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | H1, H2 |
| 2 | PTC 50ma | Fuse:Fuse_0805_2012Metric | P1, P2 |
| 2 | jumper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | OP1, OP2 |
| 1 | 100uF/35V | Capacitor_SMD:CP_Elec_6.3x7.7 | 100C1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | 10C3 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | 1C1 |
| 1 | 2pin connector | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2 |
| 1 | 47 | Resistor_SMD:R_2512_6332Metric | R33 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | 4cc1 |
| 1 | 6.8uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | 68K | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 8Mhz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | EarthClean | NetTie:NetTie-2_SMD_Pad0.5mm | CMN1 |
| 1 | IEC61076-2_M8_A-coding_01x04_Receptacle_Shielded | Connector_TE-Connectivity:TE_T4041037041-000_M8_04_Socket_Straight | J4 |
| 1 | IRFR024PBF | Package_TO_SOT_SMD:TO-252-2 | Q3 |
| 1 | LOGO | LOGO | HİPER |
| 1 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SS34 | Diode_SMD:D_SMB | D1 |
| 1 | SSD1306 | OLEDI2C:128x64OLED | Sc1 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | TCS34725FN | TCS34725FN:TCS34725FN_AMS | U4 |
| 1 | TPS54331DDAR | TPS54331DDAR:DDA8_3X2P13-L | U3 |
| 1 | US1M | Diode_SMD:D_SMA | D3 |
Similar boards
- 4 layers53.3 × 68.6 mm
Unoq power shield
ramalamadingdong/pcb-agent
Design a PCB end to end with an agent: CSV source of truth, idempotent build passes, containerized KiCad+Freerouting, and checks that run on the fab output.
56 parts4GPL-3.0 - 4 layers85 × 65 mm
Stm32h743 core
changgeruoxiao/hagent
一块 STM32H743ZIT6（LQFP144, Cortex-M7 @ 480MHz）最小系统核心板，以及生成它的全自动化 EDA 流水线：
81 partsMIT - 4 layers100 × 72 mm
Rtl8367-switch
Deco025/rtl8367-switch
Five-port gigabit unmanaged Ethernet switch based on the Realtek RTL8367RB - 4-layer KiCad 10 design with fabrication outputs
229 partsCERN-OHL-S-2.0 - 2 layers99.9 × 70.5 mm
PCB puerta
yabo104/Electric_Door_With_ESP32_S3
This proyeject contains a hardware/firmware development for an electric door controller.
75 parts - 2 layers100 × 80 mm
Meganecan gw
Barbedx/MeganeCAN
ESP32-based CAN-bus companion for Renault Megane 2 infotainment displays.
68 parts3 - 2 layers139.9 × 85.8 mm
Pas hw
NGOQUOC98/ESP32_MODBUS_PCB_MASTER
This project was in development phase - we will remove this remark after release
198 parts1 - 4 layers92.1 × 62.8 mm
Motor controller
mohamed-belal-10/can-motor-controller-node
CAN-connected closed-loop DC motor controller node — KiCad hardware (STM32F103, DRV8874, SN65HVD230) with an AS5600 encoder sub-PCB
55 partsMIT
Questions
How big is the ColorSensor01 PCB?
It measures 74 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ColorSensor01 use?
99 parts, built around the STM32F103CBT6, SN65HVD230D, TCS34725FN and TPS54331DDAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ColorSensor01 KiCad files?
From the nevzathipertek/color_sensor repository on GitHub, at the commit this page was made from: the board is pcb_and_electronic_design/colorSensor01/colorSensor01.kicad_pcb and its schematic pcb_and_electronic_design/colorSensor01/colorSensor01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ColorSensor01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask nevzathipertek before reusing the design.