2 layers90 × 125 mm
SLI HW
dgramop/SLI-HW
Hardware files for Oakton High School's entry into NASA's Student Launch Initiative
98 parts2MIT
2 layers596.2 × 506.1 mm
SLI HW
dgramop/SLI-HW2Hardware files for Oakton High School's entry into NASA's Student Launch Initiative
- Size
- 596.2 × 506.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 128
- Nets
- 216
- Pads
- 491
- Tracks, vias
- 535, 45
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Feb 2020
- Updated
- 6 Feb 2020
Overview
SLI HW is an open-source printed circuit board by dgramop, from the dgramop/SLI-HW repository on GitHub, published under the MIT licence. It is a 2-layer board of 596.2 × 506.1 mm with 128 parts on 216 nets, routed with 535 tracks and 45 vias.
It is built around the BMP388 and ICM20948. Its parts include 66 connectors, 22 resistors, 7 capacitors, 6 ICs and 6 diodes. It belongs with the STM32 boards of this library.
Main components
2README
README.mdSLI-HW
Hardware files for Oakton High School's entry into NASA's Student Launch Initiative
Parts
128| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | R_US | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 +5 |
| 5 | CAP | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4, C5, C6, C7 |
| 4 | LOGO | images:cougar | G***, G***, G***, G*** |
| 4 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1, SW2, SW3, SW4 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 2 | BMP388 | BMP388:PQFN50P200X200X80-10N | U3, U4 |
| 2 | CAP 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 2 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J10, J22 |
| 2 | Micro_SD_Card | 1140084168:1140084168 | J9, J12 |
| 1 | AD1 xbee | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J24 |
| 1 | AD2 xbee | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J25 |
| 1 | AD3 xbee | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J26 |
| 1 | ADA746 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | U6 |
| 1 | ASC xbee | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J28 |
| 1 | AccInt | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J39 |
| 1 | Battery_Cell | Battery:AA battery holder | BT1 |
| 1 | Boot bridge | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Boot bridge, GND | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | Boot bridge, HIGH | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Bridge for power via USB | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J35 |
| 1 | Conn_01x01_Female | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J29 |
| 1 | DIO xbee | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J16 |
| 1 | DTR for xbee | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J20 |
| 1 | Divide for 3.3V | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J8 |
| 1 | Divide for 3.6V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J38 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J14 |
| 1 | GNDbootjumper | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | I2C1SCL | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J44 |
| 1 | I2C1SDA | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J45 |
| 1 | ICM20948 | Package_DFN_QFN:QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm | U1 |
| 1 | JTDO/TRACESWO | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J43 |
| 1 | Jumper for emergency wakeup | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | LED 3.3V rail | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | LED power available 3.3 V (on voltage divider of accel) | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D8 |
| 1 | LED power available 3.6 V (on voltage divider of accel) | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | P1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J73 |
| 1 | P2 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J72 |
| 1 | P3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J71 |
| 1 | P4 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J70 |
| 1 | P5 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J69 |
| 1 | P6 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J68 |
| 1 | PA0 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J67 |
| 1 | PA1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J74 |
| 1 | PA15 JTDI | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J42 |
| 1 | PA4 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J75 |
| 1 | PA5 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J76 |
| 1 | PA6 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J77 |
| 1 | PA7 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J78 |
| 1 | PB0 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J79 |
| 1 | PB1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J80 |
| 1 | PD0 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J50 |
| 1 | PD1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J51 |
| 1 | PD10 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J60 |
| 1 | PD11 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J61 |
| 1 | PD12 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J62 |
| 1 | PD13 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J63 |
| 1 | PD14 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J64 |
| 1 | PD15 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J65 |
| 1 | PD2 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J52 |
| 1 | PD3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J53 |
| 1 | PD4 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J54 |
| 1 | PD5 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J55 |
| 1 | PD6 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J56 |
| 1 | PD7 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J57 |
| 1 | PD8 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J58 |
| 1 | PD9 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J59 |
| 1 | PINboot | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | PWM0 xbee | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J17 |
| 1 | R_US 91k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J66 |
| 1 | STM32F103CT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | STM32F205ZCTx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U2 |
| 1 | SWDCLK | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J36 |
| 1 | SWDCLK for sensor | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J33 |
| 1 | SWDIO | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J37 |
| 1 | SWDIO for sensor | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J34 |
| 1 | UART1RX | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J41 |
| 1 | UART1TX | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J40 |
| 1 | UART4RX | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J49 |
| 1 | UART4TX | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J48 |
The 116 most common of 128 parts.
More from dgramop/SLI-HW
1Similar boards
- 2 layers77.7 × 75.9 mm
- 2 layers115.8 × 160.2 mm
- 2 layers65.5 × 74.6 mm
- 6 layers50 × 50 mm
- 6 layers145 × 43.4 mm
- 2 layers33 × 87.9 mm
Pcb bottom
NicolasFavero/AutonomousAircraftControlSystem
Embedded flight control and telemetry system for an autonomous aircraft prototype based on ESP32-S3.
15 parts1 - 8 layers38.5 × 38.5 mm
Flight Controller
rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!
133 parts57MIT - 4 layers66.4 × 66.4 mm
Rera
fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.
140 parts34GPL-3.0
Questions
How big is the SLI HW PCB?
It measures 596.2 × 506.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SLI HW use?
128 parts, built around the BMP388 and ICM20948. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SLI HW KiCad files?
From the dgramop/SLI-HW repository on GitHub, at the commit this page was made from: the board is old/SLI HW.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SLI HW design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).