

Layer3
ducc.'s RCJ Soccer 2025 Team Repository
- Size
- 188.9 × 115 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 109
- Pads
- 307
- Tracks, vias
- 661, 117
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Oct 2024
- Updated
- 7 Jun 2025
Overview
Layer3 is an open-source printed circuit board by 8076ducc, from the 8076ducc/robocup-2025 repository on GitHub. It is a 2-layer board of 188.9 × 115 mm with 59 parts on 109 nets, routed with 661 tracks and 117 vias.
It is built around the STM32F103C8T6, 74LVC2G04DW and BNO085, with the TSSP58038 among its other parts. Its parts include 7 ICs, 7 connectors, 6 capacitors, 5 resistors and 3 switches. It belongs with the ESP32, STM32 and RISC-V boards of this library.
Main components
4STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)74LVC2G04DW
SOT-363-40℃~+125℃ 1.65V~5.5V 1.7V~2V 10uA 2 2 3.8ns@5V,50pF 32mA 32mA 700mV~800mV 74LVC SOT-363 Inverters ROHSDiodes IncorporatedGates And InvertersBNO085
LGA-28(3.8x5.2)1.65V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(3.8x5.2) Accelerometers ROHSCEVAAccelerometersTSSP58038
SIP-3-2.54mm-25℃~+85℃ 10mW 2.5V~5.5V 25m 38kHz 700uA ±45° SIP-3-2.54mm Infrared Remote Receiver (IRM) ROHSVishay IntertechnologyInfrared Remote Receiver (IRM)
README
README.mdducc. Robotics: RoboCupJunior Soccer 2025
This repository contains ducc's working files and source code for the 2025 RoboCupJunior Soccer Open and Soccer Lightweight competition.
About
ducc is a six-man team comprising Neo Hao Jun, Isaac Tan, Zhu Yunsong, Aidan Yeong, Faith Yang and Neo Jun Hao from the Hwa Chong Robotics Club in Singapore.
Technologies
This project was built with the following tools:
- Mechanical: Autodesk Fusion
- Electrical: KiCad 7.0
- Programming: PlatformIO
Intellectual Property
Copyright
© 2025, ducc. Robotics Competition Team.
While we have made every effort to abide by legal and ethical requirements when using works that we did not create, some may have been overlooked inadvertently. Please let us know and we will be happy to make the necessary arrangements.
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | TSSP58038 | OptoDevice:Vishay_MINICAST-3Pin | IR1, IR2, IR10, IR11, IR12, IR13, IR14, IR15, IR16, IR17, IR18, IR19, IR20, IR21, IR22, IR23 +8 |
| 5 | SH1.0 5P | Connector_JST:JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_Horizontal | J1, J2, J3, J4, J11 |
| 4 | 1μF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R5, R8 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 1pF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 74LVC2G04 | Package_TO_SOT_SMD:SOT-23-6 | U5, U6 |
| 1 | BLUE | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | BNO085 | footprints:bno085 | U4 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | DRIBBLERJ1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | Conn_01x16_Socket | footprints:openmv | U3 |
| 1 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 | libraries:xiao-esp32c3 | U2 |
| 1 | SH1.0 Female | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J6 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U7 |
| 1 | SW_DPDT_x2 | Switches:SWITCH_SPDT_PTH_11.6X4.0MM_LOCK | SW2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW5 |
| 1 | SW_SPDT | Switches:SWITCH_SPDT_PTH_12.7X6.7MM | SW1 |
| 1 | TEENSY 4.0 | libraries:Teensy 4.0 | U1 |
More from 8076ducc/robocup-2025
5- 2 layers208 × 198.1 mm

- 2 layers178 × 167.8 mm

- 2 layers71 × 30 mm

- 2 layers

- 2 layers

Similar boards
- 2 layers126.4 × 78.4 mm

- 2 layers159.9 × 99.9 mm

- 4 layers163 × 174.4 mm

Gd rev3b
baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!
440 parts33MIT - 4 layers96 × 172 mm

- 4 layers90 × 80 mm

- 2 layers70.3 × 102.1 mm

- 6 layers228.6 × 110.7 mm

Driver
thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules
690 parts4MIT - 6 layers135.8 × 121.3 mm

Sictroller
henryhallam/quickie-mc-hw
KiCAD design for the Quick-E motor controller (inverter)
350 parts1
Questions
How big is the Layer3 PCB?
It measures 188.9 × 115 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Layer3 use?
59 parts, built around the STM32F103C8T6, 74LVC2G04DW, BNO085 and TSSP58038. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Layer3 KiCad files?
From the 8076ducc/robocup-2025 repository on GitHub, at the commit this page was made from: the board is lightweight/electrical design/layer3/layer3.kicad_pcb and its schematic lightweight/electrical design/layer1/layer1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Layer3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask 8076ducc before reusing the design.