Skip to the content
2 layers9.1 × 18.8 mmLDR, the printed circuit board in 3D

LDR

senrobo/open

 . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

Full screenGitHub.kicad_pcb
Size
9.1 × 18.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
2
Pads
4
Tracks, vias
4, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
31 Jul 2024
Updated
11 Apr 2026

Overview

LDR is an open-source printed circuit board by senrobo, from the senrobo/open repository on GitHub, published under the MIT licence. It is a 2-layer board of 9.1 × 18.8 mm with 2 parts on 2 nets, routed with 4 tracks and 0 vias.

Its parts include 1 resistor and 1 connector.

README

README.md

open

Project Structure

 . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DS_Store │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │ ├──  Crystal.step │ │ ├──  'crystal 8MHz.stp' │ │ ├──  DFN08L_5X6A.step │ │ ├──  IRLML6344TRPBF.stp │ │ ├──  led0603.step │ │ ├──  led2835.stp │ │ ├──  LM2587S.stp │ │ ├──  NCP81074AMNTBG.stp │ │ ├──  PESD3V3Y1BSFYL.stp │ │ ├──  PowSO30-ST.step │ │ ├──  R0603.step │ │ ├──  'Seeed Studio XIAO-ESP32-C3.step' │ │ ├──  SS5X.stp │ │ ├──  SS12D00G3.stp │ │ ├──  STP75NF75.step │ │ ├──  SW_PUSH_SPST.step │ │ ├──  teensy4.step │ │ ├──  TO-220-3_Vertical.step │ │ ├──  TO-252.step │ │ ├──  XT30UPB-F.step │ │ └──  XT60UPB-M.step │ ├──  activation.kicad_sch │ ├──  boost-switch.kicad_sch │ ├──  boost.kicad_sch │ ├──  cao.pcb3d │ ├──  connections.kicad_sch │ ├──  fp-info-cache │ ├──  l1.kicad_pcb │ ├──  l1.kicad_prl │ ├──  l1.kicad_pro │ ├──  l1.kicad_sch │ ├──  l1.step │ ├──  led.kicad_sch │ ├──  lightring.kicad_sch │ ├──  miscellaneous.kicad_sch │ ├──  motordriver.kicad_sch │ ├──  mux.kicad_sch │ ├──  Power.kicad_sch │ ├──  stm32.kicad_sch │ ├──  sym-lib-table │ └──  ~l1.kicad_sch.lck ├──  processingUnit │ ├──  3dmodels │ │ ├──  'Adafruit BNO085.step' │ │ ├──  OPENMVRT1062.STEP │ │ ├──  R0603.step │ │ ├──  'Seeed Studio XIAO-ESP32-C3.step' │ │ ├──  SS12D00G3.stp │ │ └──  teensy4.step │ ├──  l3.pretty │ │ ├──  bno085.kicad_mod │ │ ├──  cap0603.kicad_mod │ │ ├──  led0603.kicad_mod │ │ ├──  OpenMV_RT.kicad_mod │ │ ├──  res0603.kicad_mod │ │ ├──  'SEN Logo Mini.kicad_mod' │ │ ├──  SS12D00G3.kicad_mod │ │ ├──  'Teensy 4.0.kicad_mod' │ │ └──  xiao-esp32c3.kicad_mod │ ├──  2024l3.step │ ├──  fp-info-cache │ ├──  fp-lib-table │ ├──  l3.kicad_pcb │ ├──  l3.kicad_prl │ ├──  l3.kicad_pro │ └──  l3.kicad_sch ├──  .gitignore ├──  LICENSE └──  README.md

Parts

2
QtyValueFootprintReferences
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ1
1R_PhotoLibrary:als-pt19R1

More from senrobo/open

9
  • 2 layers150 × 160.8 mmProcessingUnit, the printed circuit board in 3D

    ProcessingUnit

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    136 partsMIT
  • 2 layers126.4 × 112 mmOpen, the printed circuit board in 3D

    Open

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    127 partsMIT
  • 2 layers118 × 118 mmCamUnit new, the printed circuit board in 3D

    CamUnit new

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    34 partsMIT
  • 2 layers72.2 × 33.9 mmBoostUnit, the printed circuit board in 3D

    BoostUnit

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    26 partsMIT
  • 2 layers72.2 × 33.9 mmBuckUnit, the printed circuit board in 3D

    BuckUnit

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    25 partsMIT
  • 2 layers72.2 × 33.9 mmCapacitor Bank, the printed circuit board in 3D

    Capacitor Bank

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    9 partsMIT
  • 2 layers9.1 × 18.8 mmEmmiter, the printed circuit board in 3D

    Emmiter

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    5 partsMIT
  • 2 layers9.1 × 18.8 mmLED, the printed circuit board in 3D

    LED

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    3 partsMIT
  • 2 layers9.1 × 18.8 mmReceiver, the printed circuit board in 3D

    Receiver

    senrobo/open

     . │ ├──  l1 │ ├──  3dmodels │ │ ├──  .DSStore │ │ ├──  0603Inductor.step │ │ ├──  1040Inductor.step │ │ ├──  ALS-PT19.step │ │ ├──  C0603.step │ │ ├──  CAPPRD750W80D1600H2500.stp │ │ ├──  CD74HC4067M.step │ │…

    2 partsMIT

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the LDR PCB?

It measures 9.1 × 18.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LDR use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LDR KiCad files?

From the senrobo/open repository on GitHub, at the commit this page was made from: the board is breakout/LDR/LDR.kicad_pcb and its schematic breakout/Cam Adapter/Cam Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LDR design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).