Skip to the content

Boards by sOrzada

25 boards

Open-source boards designed in KiCad by sOrzada on GitHub, from 1 repository. A board’s address here is its repository’s there.

  • 6 layers160 × 100 mmModulator V1p2, the printed circuit board in 3D

    Modulator V1p2

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    114 partsCERN-OHL-W-2.0
  • 2 layers200 × 121 mm24V PWS, the printed circuit board in 3D

    24V PWS

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    25 partsCERN-OHL-W-2.0
  • 2 layers30 × 25 mm50Ohm, the printed circuit board in 3D

    50Ohm

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    3 partsCERN-OHL-W-2.0
  • 2 layers376 × 128.6 mmBackplane, the printed circuit board in 3D

    Backplane

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    77 partsCERN-OHL-W-2.0
  • 2 layers165 × 95 mmCap array with Current Limiter V1p0, the printed circuit board in 3D

    Cap array with Current Limiter V1p0

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    37 partsCERN-OHL-W-2.0
  • 2 layers90 × 80 mmCirculator Board, the printed circuit board in 3D

    Circulator Board

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    10 partsCERN-OHL-W-2.0
  • 2 layers17 × 61 mmDecoupling Board, the printed circuit board in 3D

    Decoupling Board

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    5 partsCERN-OHL-W-2.0
  • 2 layers31 × 46 mmEndCap Board, the printed circuit board in 3D

    EndCap Board

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    7 partsCERN-OHL-W-2.0
  • 2 layers27 × 36 mmFilter, the printed circuit board in 3D

    Filter

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    10 partsCERN-OHL-W-2.0
  • 2 layers160 × 100 mmHPA Module V1p1, the printed circuit board in 3D

    HPA Module V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    54 partsCERN-OHL-W-2.0
  • 2 layers38 × 73 mmMatching Network, the printed circuit board in 3D

    Matching Network

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    9 partsCERN-OHL-W-2.0
  • 2 layers140 × 120 mmMulti PWS V1p0, the printed circuit board in 3D

    Multi PWS V1p0

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    29 partsCERN-OHL-W-2.0
  • 2 layers165 × 85 mmPower Distribution V1.1, the printed circuit board in 3D

    Power Distribution V1.1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    63 partsCERN-OHL-W-2.0
  • 2 layers160 × 100 mmPower Supply V1p1, the printed circuit board in 3D

    Power Supply V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    19 partsCERN-OHL-W-2.0
  • 2 layers160 × 100 mmRF Splitter active, the printed circuit board in 3D

    RF Splitter active

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    21 partsCERN-OHL-W-2.0
  • 2 layers160 × 100 mmSignal source V1p0, the printed circuit board in 3D

    Signal source V1p0

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    65 partsCERN-OHL-W-2.0
  • 4 layers160 × 100 mmSPI2Parallel v1p1, the printed circuit board in 3D

    SPI2Parallel v1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    65 partsCERN-OHL-W-2.0
  • 2 layers55 × 50 mmStage1 amp flat switch 5V V1p1, the printed circuit board in 3D

    Stage1 amp flat switch 5V V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    33 partsCERN-OHL-W-2.0
  • 2 layers75 × 60 mmStage2 Amplifier, the printed circuit board in 3D

    Stage2 Amplifier

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    28 partsCERN-OHL-W-2.0
  • 2 layers21 × 48 mmStatus Board, the printed circuit board in 3D

    Status Board

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    19 partsCERN-OHL-W-2.0
  • 6 layers160 × 100 mmTiming Control V1p1, the printed circuit board in 3D

    Timing Control V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    103 partsCERN-OHL-W-2.0
  • 2 layers160 × 100 mmTR UBL Splitter V1p1, the printed circuit board in 3D

    TR UBL Splitter V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    11 partsCERN-OHL-W-2.0
  • 2 layers35 × 26 mmUBL Distribution V1p0, the printed circuit board in 3D

    UBL Distribution V1p0

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    11 partsCERN-OHL-W-2.0
  • 2 layers160 × 100 mmUSB2SPI, the printed circuit board in 3D

    USB2SPI

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    14 partsCERN-OHL-W-2.0