6 layers160 × 100 mm
Timing Control V1p1
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
103 partsCERN-OHL-W-2.0
6 layers160 × 100 mm
Modulator V1p2
sOrzada/STASIS_Exposure_HardwareThis is the repository for the exposition hardware of the STASIS project.
- Size
- 160 × 100 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 114
- Nets
- 195
- Pads
- 846
- Tracks, vias
- 3,143, 538
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Feb 2025
- Updated
- 30 Sep 2025
Overview
Modulator V1p2 is an open-source printed circuit board by sOrzada, from the sOrzada/STASIS_Exposure_Hardware repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 6-layer board of 160 × 100 mm with 114 parts on 195 nets, routed with 3,143 tracks and 538 vias.
It is built around the SN74LVCH16244ADLR, AD9754AR and SN74CB3Q16245DLR, with the 74ALVC00D, 74LVC1G04DCKRG and 74LVC1G08DCKRG among its other parts. Its parts include 41 capacitors, 26 resistors, 18 ICs, 8 inductors and 3 diodes.
Main components
12
SN74LVCH16244ADLR
SSOP-48-300mil-40℃~+125℃ 1.1ns@3.3V,50pF 1.65V~3.6V 20uA 24mA 24mA 4 4 74LVCH Tri-State Unidirectional SSOP-48-300mil Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
AD9754AR
SOIC-28-300mil-40℃~+85℃ 1 14 2LSB、3LSB 35ns 4.5V~5.5V 4mA SOIC-28-300mil Digital to Analog Converters (DAC) ROHSAnalog DevicesDigital To Analog Converters (DAC)SN74CB3Q16245DLR
SSOP-48-300mil-40℃~+85℃ 16 2.3V~3.6V 300ps 4pF 5Ω SSOP-48-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
74ALVC00D
SO-14-40℃~+85℃ 1.25V~1.51V、1.7V~2.01V、1.8V~2.1V、2.2V~2.68V、2.2V~2.53V、2.4V~2.76V 1.65V~3.6V 1.7V、2V 2 2.8ns@2.3V,30pF、3ns@3.3V,50pF、3.2ns@2.7V,50pF、4.4ns@1.65V,30pF 200mV、300mV、400mV、550mV 20uA 24mA 24mA 4 700mV、800mV 74ALVC NAND Gate Overvoltage-tolerant input、Local shutdown mode Schmitt trigger SO-14 Logic Gates ROHSNexperiaGates
74LVC1G04DCKRG
SC-70-5-25℃~+70℃ 1.47V、1.64V、2.15V、2.73V、4V 1.65V~5.5V 10mV、110mV、110mV、200mV、350mV 10ns@5V,15pF 10uA 32mA 32mA 74LVC SC-70-5 Inverters ROHSHANSCHIP semiconductorLogic Gates74LVC1G08DCKRG
SC-70-5-25℃~+70℃ 1 1.65V~5.5V 1.7V 10ns@5V,15pF 10uA 2 32mA 32mA 350mV 4V 700mV 74LVC AND Gate SC-70-5 Logic Gates ROHSHANSCHIP semiconductorLogic GatesSN74LVC02AD
SOIC-14-40℃~+125℃ 1.65V~3.6V 1.7V~2V 1uA 24mA 24mA 4 4.2ns@3.3V,50pF 74LVC Series NOR Gate SOIC-14 Logic Gates ROHSTexas InstrumentsLogic GatesSN74LVC04ANS
SOIC-14-208mil-40℃~+125℃ 1.29V、1.9V、2.2V、2.3V、2.4V 1.65V~3.6V 100mV、240mV、300mV、400mV、550mV 1uA 24mA 24mA 4.3ns@3.3V,50pF 6 74LVC Power shutdown protection SOIC-14-208mil Inverters ROHSTexas InstrumentsInvertersSN74LVC16373DL
SSOP-48-300mil-40℃~+85℃ 1.65V~3.6V 2.1ns 24mA 24mA 74LVC D Latch Tri-State SSOP-48-300mil Latches ROHSTexas InstrumentsLatchesSN74LVC1G32IDCKREP
SC-70-5-40℃~+85℃ 1 1.65V~5.5V 1.7V~2V 10uA 2 3.8V 32mA 32mA 4.5ns@5V,50pF 550mV 74LVC Series Local shutdown mode OR Gate SC-70-5 Logic Gates ROHSTexas InstrumentsLogic Gates
74LV393PW
TSSOP-14-40℃~+125℃ 1V~3.6V 2 20MHz Asynchronous Divide-by-2 Falling Edge Up Counter TSSOP-14 Counters, Dividers ROHSNexperiaCounters / Dividers
AZ1117IH-3.3TRG1
SOT-223-40℃~+125℃@(Tj) 1 1.3V@(0.8A) 15V 3.3V 4mA 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedUncategorised
README
README.mdSTASIS_Exposure_Hardware
This is the repository for the exposure hardware of the STASIS project. The corresponding software can be found in this repository: https://github.com/sOrzada/STASIS_Control
by Stephan Orzada @ German Cancer Research Center (DKFZ)
Overview
The STASIS RF exposure system is an open-source hardware and software platform designed for implant testing under exposure to radiofrequency (RF) fields, such as those encountered in the environment of an MRI system. For this purpose, the target RF frequency is 128 MHz, corresponding to the resonant frequency of protons in a 3 Tesla magnetic field. The system is capable of transmitting on eight independent RF channels, enabling parallel transmission.
To ensure the design is easily accessible to potential users, all design files and software are publicly available and can be accessed via the following repositories:
https://github.com/sOrzada/STASIS_Exposure_Hardware
https://github.com/sOrzada/STASIS_Control
All hardware components of the exposure system are licensed under the CERN-OHL-W while the software is licensed under a GNU GPL v3. In addition the project has been submitted to the conformity assessment body of the Open Source Imaging Initiative e.V. (https://www.opensourceimaging.org) to assess its open source status according to DIN SPEC 3105.
To further improve accessibility, standard components with long production lifespans were selected wherever possible. For example, standard logic components were used instead of specialised microcontrollers or FPGAs.
Parts
114| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10nF | Modulator_V1p2:C0603_334 | C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C34, C35, C36, C37 +4 |
| 11 | 100k | Modulator_V1p2:R0603_334 | R1, R2, R3, R19, R20, R21, R22, R23, R24, R25, R26 |
| 8 | 100nF | Modulator_V1p2:C0603_334 | C1, C2, C3, C4, C11, C12, C19, C20 |
| 4 | 1.5uH | Modulator_V1p2:L2012C_334 | L3, L4, L7, L8 |
| 4 | 140 | Modulator_V1p2:R0603_334 | R6, R7, R8, R9 |
| 4 | 1uH | Modulator_V1p2:L2012C_334 | L1, L2, L5, L6 |
| 4 | 74LVC1G17DCK | Modulator_V1p2:SC70-5_86 | IC5, IC13, IC14, IC18 |
| 3 | 10nF | Modulator_V1p2:C0402_334 | C15, C16, C33 |
| 3 | 74HC688DW | Modulator_V1p2:SO20W_85 | IC3, IC4, IC16 |
| 3 | SMA_CON-H | Modulator_V1p2:BU-SMA-H | X1, X2, X3 |
| 2 | 110pF | Modulator_V1p2:C0603_334 | C5, C8 |
| 2 | 1k | Modulator_V1p2:R0603_334 | R15, R16 |
| 2 | 1nF | Modulator_V1p2:C0805_334 | C17, C18 |
| 2 | 220 | Modulator_V1p2:R0603_334 | R10, R11 |
| 2 | 220pF | Modulator_V1p2:C0603_334 | C7, C10 |
| 2 | 270pF | Modulator_V1p2:C0603_334 | C6, C9 |
| 2 | 2k | Modulator_V1p2:R0603_334 | R4, R5 |
| 2 | 74LV393PW | Modulator_V1p2:TSSOP14 | U$7, U$8 |
| 2 | AD9754 | Modulator_V1p2:TSSOP28 | U$3, U$4 |
| 2 | BAT60J | Modulator_V1p2:SOD323_ST_210 | D1, D2 |
| 2 | NP | Modulator_V1p2:R0805_334 | R12, R14 |
| 2 | SN74CB3Q16245DLR | Modulator_V1p2:SSOP48DL_83 | IC8, IC9 |
| 2 | SN74LVCH16244ADLR | Modulator_V1p2:SSOP48DL_83 | IC10, IC20 |
| 2 | SRAM_64K_16BIT | Modulator_V1p2:TSOPII-Z44 | U$1, U$2 |
| 1 | Modulator_V1p2:LOGO_DKFZ | U$10 | |
| 1 | Modulator_V1p2:LOGO_STASIS | U$11 | |
| 1 | 0 | Modulator_V1p2:R0805_334 | R13 |
| 1 | 10mA 2.2-2.4V | Modulator_V1p2:LED3MM_259 | LED1 |
| 1 | 10µF | Modulator_V1p2:C1206_334 | C13 |
| 1 | 120 | Modulator_V1p2:R0603_334 | R17 |
| 1 | 22µF | Modulator_V1p2:C1206_334 | C14 |
| 1 | 50 | Modulator_V1p2:R0603_334 | R18 |
| 1 | 74ALVC00 | Modulator_V1p2:SO14_88 | IC1 |
| 1 | 74LVC1G04DCK | Modulator_V1p2:SC70-5_87 | IC11 |
| 1 | 74LVC1G08DCK | Modulator_V1p2:SC70-5_87 | IC15 |
| 1 | AD8345E | Modulator_V1p2:TSSOP16EXP | U$6 |
| 1 | AZ1117IH-3.3TRG1 | Modulator_V1p2:SOT223 | U$9 |
| 1 | BUS | Modulator_V1p2:VG64B_79 | J1 |
| 1 | DS1100LZ-20LZ | Modulator_V1p2:SO-08 | U$5 |
| 1 | ETC1-1-13 | Modulator_V1p2:ETC1-1-13 | U$12 |
| 1 | PINHD-2X4 | Modulator_V1p2:2X04_16378166 | JP1 |
| 1 | SN74LVC02AD | Modulator_V1p2:SO14_88 | IC24 |
| 1 | SN74LVC04ANS | Modulator_V1p2:SO14_88 | IC2 |
| 1 | SN74LVC16373 | Modulator_V1p2:SSOP48DL_83 | IC6 |
| 1 | SN74LVC1G32IDCKREP | Modulator_V1p2:SC70-5_87 | IC7 |
| 1 | SWS008 | Modulator_V1p2:SMS-008_362 | S1 |
More from sOrzada/STASIS_Exposure_Hardware
12- 2 layers376 × 128.6 mm
Backplane
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
77 partsCERN-OHL-W-2.0 - 2 layers160 × 100 mm
Signal source V1p0
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
65 partsCERN-OHL-W-2.0 - 4 layers160 × 100 mm
SPI2Parallel v1p1
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
65 partsCERN-OHL-W-2.0 - 2 layers165 × 85 mm
Power Distribution V1.1
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
63 partsCERN-OHL-W-2.0 - 2 layers150 × 90 mm
VoltageControl V1p1
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
57 partsCERN-OHL-W-2.0 - 2 layers160 × 100 mm
HPA Module V1p1
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
54 partsCERN-OHL-W-2.0 - 2 layers165 × 95 mm
Cap array with Current Limiter V1p0
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
37 partsCERN-OHL-W-2.0 - 2 layers55 × 50 mm
Stage1 amp flat switch 5V V1p1
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
33 partsCERN-OHL-W-2.0 - 2 layers140 × 120 mm
Multi PWS V1p0
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
29 partsCERN-OHL-W-2.0 - 2 layers75 × 60 mm
Stage2 Amplifier
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
28 partsCERN-OHL-W-2.0 - 2 layers200 × 121 mm
24V PWS
sOrzada/STASIS_Exposure_Hardware
This is the repository for the exposition hardware of the STASIS project.
25 partsCERN-OHL-W-2.0
Similar boards
- 4 layers100 × 43.5 mm
- 2 layers
QFHBAL01
ODZ-UJF-AV-CR/QFHBAL01
Balun for QFH antennas. Antenna structure should be 3D printed.
10 parts6GPL-3.0 - 4 layers69.6 × 43.5 mm
Zturn adc
formalism/zturn-adc-fm-rx
FM radio reciever by custom ADC/FM BPF board and Zturn board.
109 parts5 - 4 layers127 × 101.6 mm
- 2 layers66.5 × 77.7 mm
- 4 layers113 × 70.1 mm
- 2 layers40.1 × 30 mm
SATABAL01
mlab-modules/SATABAL01
RF balun with unballanced MCX/SMA and balanced SATA connectors
9 partsGPL-3.0 - 4 layers66 × 155 mm
Questions
How big is the Modulator V1p2 PCB?
It measures 160 × 100 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Modulator V1p2 use?
114 parts, built around the SN74LVCH16244ADLR, AD9754AR, SN74CB3Q16245DLR and 74ALVC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Modulator V1p2 KiCad files?
From the sOrzada/STASIS_Exposure_Hardware repository on GitHub, at the commit this page was made from: the board is Control System/KiCAD_PCBs/Modulator/Modulator_V1p2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Modulator V1p2 design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).