Skip to the content
2 layers38 × 73 mmMatching Network, the printed circuit board in 3D

This is the repository for the exposition hardware of the STASIS project.

Size
38 × 73 mm
Copper layers
2
Thickness
0.59 mm
Parts
9
Nets
4
Pads
13
Tracks, vias
4, 31
Pours
9
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
12 Feb 2025
Updated
30 Sep 2025

Overview

Matching Network is an open-source printed circuit board by sOrzada, from the sOrzada/STASIS_Exposure_Hardware repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 38 × 73 mm with 9 parts on 4 nets, routed with 4 tracks and 31 vias.

It is built around the AJ25HV.

Main components

1

README

README.md

STASIS_Exposure_Hardware

This is the repository for the exposure hardware of the STASIS project. The corresponding software can be found in this repository: https://github.com/sOrzada/STASIS_Control

by Stephan Orzada @ German Cancer Research Center (DKFZ)

Overview

The STASIS RF exposure system is an open-source hardware and software platform designed for implant testing under exposure to radiofrequency (RF) fields, such as those encountered in the environment of an MRI system. For this purpose, the target RF frequency is 128 MHz, corresponding to the resonant frequency of protons in a 3 Tesla magnetic field. The system is capable of transmitting on eight independent RF channels, enabling parallel transmission. To ensure the design is easily accessible to potential users, all design files and software are publicly available and can be accessed via the following repositories: https://github.com/sOrzada/STASIS_Exposure_Hardware https://github.com/sOrzada/STASIS_Control All hardware components of the exposure system are licensed under the CERN-OHL-W while the software is licensed under a GNU GPL v3. In addition the project has been submitted to the conformity assessment body of the Open Source Imaging Initiative e.V. (https://www.opensourceimaging.org) to assess its open source status according to DIN SPEC 3105.
To further improve accessibility, standard components with long production lifespans were selected wherever possible. For example, standard logic components were used instead of specialised microcontrollers or FPGAs.

Parts

9
QtyValueFootprintReferences
218pFMatching Network:C1210_334C1, C2
2AJ25HVMatching Network:AJ25HVU$1, U$2
1Matching Network:SMD2,54-5,08_412PAD1
1Matching Network:LOGO_DKFZU$5
1Matching Network:LOGO_STASISU$4
147pFMatching Network:C1210_334C3
1COAX_CON_DIRECTMatching Network:COAX.141U$3

More from sOrzada/STASIS_Exposure_Hardware

12
  • 6 layers160 × 100 mmModulator V1p2, the printed circuit board in 3D

    Modulator V1p2

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    114 partsCERN-OHL-W-2.0
  • 6 layers160 × 100 mmTiming Control V1p1, the printed circuit board in 3D

    Timing Control V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    103 partsCERN-OHL-W-2.0
  • 2 layers376 × 128.6 mmBackplane, the printed circuit board in 3D

    Backplane

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    77 partsCERN-OHL-W-2.0
  • 2 layers160 × 100 mmSignal source V1p0, the printed circuit board in 3D

    Signal source V1p0

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    65 partsCERN-OHL-W-2.0
  • 4 layers160 × 100 mmSPI2Parallel v1p1, the printed circuit board in 3D

    SPI2Parallel v1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    65 partsCERN-OHL-W-2.0
  • 2 layers165 × 85 mmPower Distribution V1.1, the printed circuit board in 3D

    Power Distribution V1.1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    63 partsCERN-OHL-W-2.0
  • 2 layers150 × 90 mmVoltageControl V1p1, the printed circuit board in 3D

    VoltageControl V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    57 partsCERN-OHL-W-2.0
  • 2 layers160 × 100 mmHPA Module V1p1, the printed circuit board in 3D

    HPA Module V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    54 partsCERN-OHL-W-2.0
  • 2 layers165 × 95 mmCap array with Current Limiter V1p0, the printed circuit board in 3D

    Cap array with Current Limiter V1p0

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    37 partsCERN-OHL-W-2.0
  • 2 layers55 × 50 mmStage1 amp flat switch 5V V1p1, the printed circuit board in 3D

    Stage1 amp flat switch 5V V1p1

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    33 partsCERN-OHL-W-2.0
  • 2 layers140 × 120 mmMulti PWS V1p0, the printed circuit board in 3D

    Multi PWS V1p0

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    29 partsCERN-OHL-W-2.0
  • 2 layers75 × 60 mmStage2 Amplifier, the printed circuit board in 3D

    Stage2 Amplifier

    sOrzada/STASIS_Exposure_Hardware

    This is the repository for the exposition hardware of the STASIS project.

    28 partsCERN-OHL-W-2.0

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Matching Network PCB?

It measures 38 × 73 mm and has 2 copper layers, 0.59 mm thick.

What parts does the Matching Network use?

9 parts, built around the AJ25HV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Matching Network KiCad files?

From the sOrzada/STASIS_Exposure_Hardware repository on GitHub, at the commit this page was made from: the board is Array/KiCAD_Files/Matching_Network/Matching Network.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Matching Network design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).