4 layers33.1 × 64.7 mm
4 layers33.1 × 64.7 mm
Kicad projects
- Size
- 33.1 × 64.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 108
- Pads
- 336
- Tracks, vias
- 1,207, 224
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Une is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 33.1 × 64.7 mm with 68 parts on 108 nets, routed with 1,207 tracks and 224 vias.
It is built around the BME680, MCP1640B-I/MC and TSL2561T, with the AP7365-30WG, MPU-9250 and VL53L1X among its other parts. Its parts include 27 capacitors, 13 resistors, 9 ICs, 7 connectors and 3 diodes. It belongs with the MSP430 boards of this library.
Main components
7
BME680
LGA-8-40℃~+85℃ 0.12hpa 0.6hpa 1.3pa/K 1.71V~3.6V 150nA 30Kpa~1.1bar I2C、SPI Temperature Sensor LGA-8 Pressure Sensors ROHSBosch SensortecPressure Sensors
MCP1640B-I/MC
DFN-8(2x3)-40℃~+125℃@(TJ) 1 19uA 2V~5.5V 350mA 500kHz 800mV~5.5V Adjustable Boost Boost Built-in Yes DFN-8(2x3) DC-DC Converters ROHSMicrochip TechnologyDC-DC Converters
TSL2561T
TMB-6-30℃~70℃ 1.35mm 16bit 2.6mm 2.7V~3.6V 3.2uA 3.8mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、Adjustable gain control、Interrupt/event trigger TMB-6 Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light Sensors
AP7365-30WG
SOT-25-40℃~+85℃@(Ta) 1 3V 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
VL53L1X
LGA-12LGA-12 New Arrivals ROHSSTMicroelectronicsUncategorised
0603ESDA-MLP1
0603-55℃~+125℃ 0.05pF 1 30V 35V Bidirectional ESD IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSEatonESD And Surge Protection (TVS/ESD)
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | mysmd:SM0603S | C2, C3, C10, C15, C16, C17, C19, C25, C26, C28 |
| 8 | 10k | mysmd:SM0603S | R2, R6, R7, R8, R10, R11, R12, R13 |
| 7 | 1u | mysmd:SM0603S | C1, C4, C9, C14, C20, C23, C24 |
| 5 | 10u | mysmd:SM0603S | C5, C7, C8, C21, C22 |
| 2 | 1k | mysmd:SM0603S | R3, R9 |
| 2 | 20p | mysmd:SM0603S | C11, C13 |
| 2 | Conn_01x15 | Pin_Headers:Pin_Header_Straight_1x15 | J5, J6 |
| 2 | LED | mysmd:SM0603S_POL | D1, D4 |
| 2 | PANSTAMPLOGO | mymods:PANSTAMPLOGO | G***, G*** |
| 2 | Q_NMOS_GSD | mysmd:SOT23 | Q1, Q2 |
| 1 | 0603ESDA-MLP1 | mysmd:SM0603S | D2 |
| 1 | 10n | mysmd:SM0603S | C27 |
| 1 | 1n | mysmd:SM0603S | C6 |
| 1 | 309k | mysmd:SM0603S | R5 |
| 1 | 32.768KHz | mysmd:EPSON_F-135 | Y1 |
| 1 | 4.7u | mysmd:SM0603S | C18 |
| 1 | 4.7u | Resistors_SMD:R_0805 | L1 |
| 1 | 47k | mysmd:SM0603S | R1 |
| 1 | 600R/200mA | mysmd:SM0603S | L2 |
| 1 | 976k | mysmd:SM0603S | R4 |
| 1 | AP7365-3.0 | TO_SOT_Packages_SMD:SOT-23-5 | U5 |
| 1 | BAT | mymods:KEYSTONE_BAT_AA_HOLDER_02 | J2 |
| 1 | BME680 | mysmd:BME680 | U6 |
| 1 | Conn_01x06 | myconnectors:PIN_ARRAY_1.27_1x6 | J1 |
| 1 | EXTERNAL | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | LOGO | mysmd:oshlogo | G*** |
| 1 | MCP1640B | TO_SOT_Packages_SMD:SOT-23-6 | U2 |
| 1 | MPU-9250 | mysmd:QFN-24_3x3mm_Pitch0.4mm | IC1 |
| 1 | MSP430FR5969 | mysmd:VQFN48 | U1 |
| 1 | PWR | Pin_Headers:Pin_Header_Straight_1x03 | J7 |
| 1 | RESET | mysmd:switch-tact-noah | SW1 |
| 1 | RN2903 | mymods:RN2903 | U9 |
| 1 | SMA | SMD_SMA_SPECIAL | J3 |
| 1 | TSL2561 | mysmd:uDFN-6 | U8 |
| 1 | VL53L1X | mysmd:Optical_LGA12 | U7 |
| 1 | XBEE | mymods:XBee_Pro | U10 |
Questions
How big is the Une PCB?
It measures 33.1 × 64.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Une use?
68 parts, built around the BME680, MCP1640B-I/MC, TSL2561T and AP7365-30WG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Une KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is panstamp-une/une.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Une design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from panStamp/kicad
12- 2 layers121.9 × 86 mm
- 4 layers81 × 76 mm
- 2 layers113 × 180 mm
- 2 layers91.9 × 86 mm
- 4 layers81 × 76 mm
- 4 layers81 × 76 mm
- 4 layers75 × 95 mm
- 4 layers50.1 × 70.1 mm
- 4 layers55 × 40 mm
- 4 layers25.4 × 55.8 mm
- 4 layers25.4 × 56.6 mm
Similar boards
- 4 layers57 × 35 mm
- 2 layers75.9 × 85.1 mm
- 2 layers32.8 × 52.5 mm
Scrapped
matarga/simple-devboard
Mk1 is the internal name of this project. I am using this as a way to learn about PCB design and embedded systems and make a "final" out of it.
52 parts - 2 layers76 × 70.3 mm
Module
valerionew/53xLIDAR
53xLIDAR is a solid state, 16 points lidar, based on ST's VL53L1x sensors
294 parts11 - 2 layers48.4 × 21.7 mm
Panel
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
75 parts4 - 2 layers86 × 85 mm
- 4 layers38 × 74 mm
Stratosdrone
equationstratos/STRATOSDRONES
A 4-layer, 36×70 mm Tello-style portrait controller board for the STRATOSDRONE: chip-down ESP32-P4 (flight + camera + hardware H.264) with an ESP32-C6-MINI-1 Wi-Fi co-processor, IMU / barometer / ToF / optical-flow…
115 parts - 4 layers48 × 52 mm
Cube
Honzaaa45/cube-hologram-pcb
Carte electronique d'un afficheur holographique Pepper's Ghost : CAO KiCad 4 couches entierement generee par du code et verifiee automatiquement
63 partsMIT