4 layers40.9 × 34.1 mm
CustomBoard
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
36 parts4
2 layers48.4 × 21.7 mm
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
- Size
- 48.4 × 21.7 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 75
- Nets
- 5
- Pads
- 330
- Tracks, vias
- 750, 90
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Jul 2018
- Updated
- 30 Oct 2021
Overview
Panel is an open-source printed circuit board by CloudyPadmal, from the CloudyPadmal/CrazyFlieToFDeck repository on GitHub. It is a 2-layer board of 48.4 × 21.7 mm with 75 parts on 5 nets, routed with 750 tracks and 90 vias.
It is built around the VL53L1X. Its parts include 30 capacitors, 30 connectors and 15 ICs.
Main components
1README
README.mdCrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
| Front View | Bottom View |
|---|---|
 |  |
Time of Flight Sensor
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitors_SMD:C_0402 | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 |
| 15 | 4.7u | Capacitors_SMD:C_0402 | C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2 |
| 15 | Bot | footprint:ToFBottom | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 |
| 15 | Top | footprint:ToFTop | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 |
| 15 | VL53L1X | footprint:VL53L1X | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 |
Questions
How big is the Panel PCB?
It measures 48.4 × 21.7 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Panel use?
75 parts, built around the VL53L1X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the CloudyPadmal/CrazyFlieToFDeck repository on GitHub, at the commit this page was made from: the board is ToFSensor/ToFBoard/Panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask CloudyPadmal before reusing the design.
More from CloudyPadmal/CrazyFlieToFDeck
3- 2 layers14.8 × 13.9 mm
Camera
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
11 parts4 - 2 layers8.4 × 5.7 mm
ToFBoards
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
5 parts4
Similar boards
- 4 layers33.1 × 64.7 mm
- 2 layers76 × 70.3 mm
Module
valerionew/53xLIDAR
53xLIDAR is a solid state, 16 points lidar, based on ST's VL53L1x sensors
294 parts11 - 2 layers86 × 85 mm
- 4 layers38 × 74 mm
Stratosdrone
equationstratos/STRATOSDRONES
A 4-layer, 36×70 mm Tello-style portrait controller board for the STRATOSDRONE: chip-down ESP32-P4 (flight + camera + hardware H.264) with an ESP32-C6-MINI-1 Wi-Fi co-processor, IMU / barometer / ToF / optical-flow…
115 parts - 4 layers48 × 52 mm
Cube
Honzaaa45/cube-hologram-pcb
Carte electronique d'un afficheur holographique Pepper's Ghost : CAO KiCad 4 couches entierement generee par du code et verifiee automatiquement
63 partsMIT - 2 layers180 × 56 mm
DBT 4.0
MaxJ02/Death_By_Table
Code for the autonomous RC-car "Death_By_Table", which competed in the YRGO Grand Prix 2023. The code is written for the Arduino Nano which uses the Atmega328p microcontroller.
16 partsMIT - 2 layers70 × 50 mm
- 2 layers60 × 60 mm
