2 layers48.4 × 21.7 mm
Panel
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
75 parts4
4 layers40.9 × 34.1 mm
CustomBoard
CloudyPadmal/CrazyFlieToFDeck4This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
- Size
- 40.9 × 34.1 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 36
- Nets
- 35
- Pads
- 201
- Tracks, vias
- 512, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Jul 2018
- Updated
- 30 Oct 2021
Overview
CustomBoard is an open-source printed circuit board by CloudyPadmal, from the CloudyPadmal/CrazyFlieToFDeck repository on GitHub. It is a 4-layer board of 40.9 × 34.1 mm with 36 parts on 35 nets, routed with 512 tracks and 61 vias.
It is built around the DS28E05P+ and VL53L1X. Its parts include 15 connectors, 14 resistors, 3 capacitors, 3 ICs and 1 diode.
Main components
2README
README.mdCrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
| Front View | Bottom View |
|---|---|
 |  |
Time of Flight Sensor
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10k | Resistors_SMD:R_0603 | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 2 | 100n | Capacitors_SMD:C_0603 | C1, C2 |
| 1 | 2k | Resistors_SMD:R_0603 | R1 |
| 1 | 4.7u | Capacitors_SMD:C_0603 | C3 |
| 1 | Camera | footprint:AMGCam | J15 |
| 1 | DS28E05 | TO_SOT_Packages_SMD:SOT-23 | U1 |
| 1 | LEFT | footprint:BF090-10-X-B2 | J2 |
| 1 | PCA9555X | Housings_SSOP:TSSOP-24_4.4x7.8mm_Pitch0.65mm | U2 |
| 1 | POWER_LED | LEDs:LED_0603 | D1 |
| 1 | RIGHT | footprint:BF090-10-X-B2 | J1 |
| 1 | Sensor01 | footprint:SensorPads | J3 |
| 1 | Sensor02 | footprint:SensorPads | J4 |
| 1 | Sensor03 | footprint:SensorPads | J5 |
| 1 | Sensor04 | footprint:SensorPads | J6 |
| 1 | Sensor05 | footprint:SensorPads | J7 |
| 1 | Sensor06 | footprint:SensorPads | J8 |
| 1 | Sensor07 | footprint:SensorPads | J9 |
| 1 | Sensor08 | footprint:SensorPads | J10 |
| 1 | Sensor09 | footprint:SensorPads | J11 |
| 1 | Sensor10 | footprint:SensorPads | J12 |
| 1 | Sensor11 | footprint:SensorPads | J13 |
| 1 | Sensor12 | footprint:SensorPads | J14 |
| 1 | VL53L1X | footprint:VL53L1X | U3 |
More from CloudyPadmal/CrazyFlieToFDeck
3- 2 layers14.8 × 13.9 mm
Camera
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
11 parts4 - 2 layers8.4 × 5.7 mm
ToFBoards
CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.
5 parts4
Similar boards
- 2 layers25.2 × 27.3 mm
Cf2-hcsr04
dbrgn/crazyflie2-hcsr04
Ultrasonic sensor (HC-SR04) extension board for the Crazyflie 2.0
9 parts2 - 4 layers25.2 × 27.3 mm
Crazyflie ESP32-Deck
mrxllone/Crazyflie-ESP32-Deck
The ESP32-C6's purpose is mainly to enable relative positioning with WiFi-FTM, which is part of my master's thesis.
38 parts1 - 4 layers36 × 36 mm
- 2 layers28 × 22 mm
- 4 layers33.1 × 64.7 mm
- 2 layers76 × 70.3 mm
Module
valerionew/53xLIDAR
53xLIDAR is a solid state, 16 points lidar, based on ST's VL53L1x sensors
294 parts11 - 2 layers86 × 85 mm
- 4 layers38 × 74 mm
Stratosdrone
equationstratos/STRATOSDRONES
A 4-layer, 36×70 mm Tello-style portrait controller board for the STRATOSDRONE: chip-down ESP32-P4 (flight + camera + hardware H.264) with an ESP32-C6-MINI-1 Wi-Fi co-processor, IMU / barometer / ToF / optical-flow…
115 parts
Questions
How big is the CustomBoard PCB?
It measures 40.9 × 34.1 mm and has 4 copper layers, 0.8 mm thick.
What parts does the CustomBoard use?
36 parts, built around the DS28E05P+ and VL53L1X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CustomBoard KiCad files?
From the CloudyPadmal/CrazyFlieToFDeck repository on GitHub, at the commit this page was made from: the board is BaseBoard/CustomBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CustomBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask CloudyPadmal before reusing the design.