
Crazyflie ESP32-Deck
mrxllone/Crazyflie-ESP32-Deck
The ESP32-C6's purpose is mainly to enable relative positioning with WiFi-FTM, which is part of my master's thesis.

Ultrasonic sensor (HC-SR04) extension board for the Crazyflie 2.0
Cf2-hcsr04 is an open-source printed circuit board by dbrgn, from the dbrgn/crazyflie2-hcsr04 repository on GitHub. It is a 2-layer board of 25.2 × 27.3 mm with 9 parts on 9 nets, routed with 61 tracks and 4 vias.
It is built around the REG71050DRV, DS28E05P+ and HC-SR04. Its parts include 3 capacitors, 3 ICs and 2 connectors. It belongs with the sensors and measurement boards of this library.
This adds support for a cheap ultrasonic sensor (HC-SR04) to the Crazyflie 2.0.
The HC-SR04 expansion board uses the following GPIO ports:
IO_1 / PB8: HC-SR04 TriggerIO_2 / PB5: HC-SR04 EchoIO_4 / PC12: REG71050 Enable
mrxllone/Crazyflie-ESP32-Deck
The ESP32-C6's purpose is mainly to enable relative positioning with WiFi-FTM, which is part of my master's thesis.


CloudyPadmal/CrazyFlieToFDeck
This repository contains KiCAD source files and generated gerber files for CrazyFlie Obstacle Avoidance Sensor Deck.


kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程


NikolaiRadke/Noko_2
The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.

billtsol/Maze
This project demonstrates how to use an Arduino board, IR sensors, and a motor driver shield to create a maze-solving robot.
It measures 25.2 × 27.3 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the REG71050DRV, DS28E05P+ and HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dbrgn/crazyflie2-hcsr04 repository on GitHub, at the commit this page was made from: the board is pcb/cf2-hcsr04.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dbrgn before reusing the design.