Skip to the content
2 layers113 × 180 mmEsp touch, the printed circuit board in 3D

Kicad projects

Size
113 × 180 mm
Copper layers
2
Thickness
1.6 mm
Parts
68
Nets
64
Pads
202
Tracks, vias
732, 169
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
6 Jul 2015
Updated
26 Jul 2018

Overview

Esp touch is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 113 × 180 mm with 68 parts on 64 nets, routed with 732 tracks and 169 vias.

It is built around the ESP-12E, FT231XS-R and MPR121QR2. Its parts include 18 resistors, 11 capacitors, 6 connectors, 5 ICs and 3 diodes. It belongs with the ESP8266 boards of this library.

Main components

3

Parts

68
QtyValueFootprintReferences
12PADmysmd:touchpad_01PAD0, PAD1, PAD2, PAD3, PAD4, PAD5, PAD6, PAD7, PAD8, PAD9, PAD10, PAD11
810kmysmd:SM0603SR2, R4, R6, R7, R8, R10, R14, R15
5100nmysmd:SM0603SC5, C6, C9, C10, C11
20mysmd:SM0603SR11, R12
2100mysmd:SM0603SR16, R17
21kmysmd:SM0603SR5, R9
21umysmd:SM0603SC2, C4
227mysmd:SM0603SR1, R3
24.7umysmd:SM0603SC1, C3
247pmysmd:SM0603SC7, C8
2CONN_01X02Pin_Headers:Pin_Header_Straight_1x02P1, P6
2LEDmysmd:SM0603S_POLD2, D3
2LOGOmymods:oshlogoG***, G***
2PANSTAMPLOGOmymods:PANSTAMPLOGOG***, G***
2SW_PUSH_SMALLmysmd:switch-tact-noahSW1, SW2
2VAL**mymods:fiducialfiducial, fiducial
11AResistors_SMD:R_1206F1
12k2mysmd:SM0603SR18
175kmysmd:SM0603SR13
1AL11Pmymods:Buzzer_7.6_12.0SP1
1AP2114H-3.3mysmd:SOT223U2
1CONN_01X03Pin_Headers:Pin_Header_Straight_1x03P4
1CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P7
1CONN_01X05mysmd:MICRO_USB_SOCKETP2
1CONN_01X07Pin_Headers:Pin_Header_Straight_1x07PROG1
1DISPLAYPin_Headers:Pin_Header_Straight_1x06P3
1D_Schottkymysmd:SMAD1
1ESP-12EESP8266:ESP-12EU1
1FT231XSSMD_Packages:SSOP-20U4
1MPR121QQFN-20-1EP_3x3mm_Pitch0.4mmU5
1Q_NMOS_GSDmysmd:SOT23Q1
1Q_NPN_EBCmysmd:SOT23EBCQ2
1SI7021mysmd:DFN-6U3

More from panStamp/kicad

12
  • 4 layers33.1 × 64.7 mmNrg3, the printed circuit board in 3D

    Nrg3

    panStamp/kicad

    Kicad projects

    135 parts15GPL-2.0
  • 2 layers121.9 × 86 mmOutput board, the printed circuit board in 3D

    Output board

    panStamp/kicad

    Kicad projects

    100 parts15GPL-2.0
  • 4 layers81 × 76 mmCb flex, the printed circuit board in 3D

    Cb flex

    panStamp/kicad

    Kicad projects

    89 parts15GPL-2.0
  • 4 layers33.1 × 64.7 mmUne, the printed circuit board in 3D

    Une

    panStamp/kicad

    Kicad projects

    68 parts15GPL-2.0
  • 2 layers91.9 × 86 mmEsp.io, the printed circuit board in 3D

    Esp.io

    panStamp/kicad

    Kicad projects

    67 parts15GPL-2.0
  • 4 layers81 × 76 mmCb io, the printed circuit board in 3D

    Cb io

    panStamp/kicad

    Kicad projects

    60 parts15GPL-2.0
  • 4 layers81 × 76 mmCb linkit, the printed circuit board in 3D

    Cb linkit

    panStamp/kicad

    Kicad projects

    43 parts15GPL-2.0
  • 4 layers75 × 95 mmCb co2, the printed circuit board in 3D

    Cb co2

    panStamp/kicad

    Kicad projects

    39 parts15GPL-2.0
  • 4 layers50.1 × 70.1 mmBattery board, the printed circuit board in 3D

    Battery board

    panStamp/kicad

    Kicad projects

    35 parts15GPL-2.0
  • 4 layers55 × 40 mmCb current, the printed circuit board in 3D

    Cb current

    panStamp/kicad

    Kicad projects

    35 parts15GPL-2.0
  • 4 layers25.4 × 55.8 mmCb sim, the printed circuit board in 3D

    Cb sim

    panStamp/kicad

    Kicad projects

    35 parts15GPL-2.0

Similar boards

  • 2 layers47.1 × 72.6 mmEsp433, the printed circuit board in 3D

    Esp433

    kekiefer/esp433

    An ESP8266 WiFi to 433MHz ASK/OOK bridge

    52 parts6MIT
  • 4 layers74.5 × 70.3 mmNest mini v2-drop in pcb, the printed circuit board in 3D

    Nest mini v2-drop in pcb

    iMike78/nest-mini-drop-in-pcb

    Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.

    229 parts628CERN-OHL-S-2.0
  • 2 layers232 × 134 mmType2 v2, the printed circuit board in 3D

    Type2 v2

    Alxdreee/TYPE-2

    Touch-capacitive polyphonic synthesizer powered by ESP32-S3

    18 parts68GPL-3.0
  • 2 layers191.9 × 127.7 mmEInkFrame, the printed circuit board in 3D

    EInkFrame

    seb-ma/eInkFrame

    A step by step guide to create a weather station (and more) in e-ink frame running with MagicMirror².

    24 parts26
  • 2 layers177.8 × 114.3 mmSynthiota1, the printed circuit board in 3D

    Synthiota1

    todbot/synthiota

    Pico/Pico2-based board for playing with synthesizers in CircuitPython

    112 parts25GPL-3.0
  • 2 layers475 × 139.9 mmSkogaslider main pcb, the printed circuit board in 3D

    Skogaslider main pcb

    skogaby/skogaslider

    Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience

    175 parts18MIT
  • 2 layers486 × 130 mmSimpl slidrr main, the printed circuit board in 3D

    Simpl slidrr main

    Infecta/simpl-slidrr

    Source files for a CHUNITHM style controller

    11 parts6GPL-3.0
  • 2 layers100 × 61 mmWgr, the printed circuit board in 3D

    Wgr

    a5632645/final_design

    simple digital waveguide synthesizer & simple mpe midi keyboard(pitch bend and pressure)

    103 parts4

Questions

How big is the Esp touch PCB?

It measures 113 × 180 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp touch use?

68 parts, built around the ESP-12E, FT231XS-R and MPR121QR2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp touch KiCad files?

From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is esp-touch/esp-touch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp touch design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).