

Cb linkit
Kicad projects
- Size
- 81 × 76 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 119
- Pads
- 211
- Tracks, vias
- 765, 431
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Cb linkit is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 81 × 76 mm with 43 parts on 119 nets, routed with 765 tracks and 431 vias.
It is built around the MIC29302WU. Its parts include 10 capacitors, 9 resistors, 5 connectors, 4 ICs and 3 diodes.
Main components
1Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1u | mysmd:SM0603S | C12, C16, C20, C22 |
| 4 | CONN_01X14 | myconnectors:pin_array_1x14 | P1, P2, P3, P4 |
| 3 | 1k | mysmd:SM0603S | R10, R11, R12 |
| 2 | 100n | mysmd:SM0603S | C1, C18 |
| 2 | 2k2 | mysmd:SM0603S | R1, R2 |
| 2 | 4.7u | mysmd:SM0603S | C19, C21 |
| 2 | 470 | mysmd:SM0603S | R3, R4 |
| 2 | LED | mysmd:SM0603S_POL | D1, D2 |
| 2 | P*** | 1pin | 1PIN, 1PIN |
| 2 | Q_NPN_EBC | libcms:SOT23EBC | Q1, Q2 |
| 2 | VAL** | mymods:fiducial | fiducial, fiducial |
| 1 | PANSTAMPLOGO | ||
| 1 | 100k | mysmd:SM0603S | R16 |
| 1 | 100u | mysmd:SMDCPOL_6.3 | C10 |
| 1 | 330u | mysmd:SMDCPOL_8 | C14 |
| 1 | 43k | mysmd:SM0603S | R17 |
| 1 | ANTENNA | myconnectors:SMA_RightAngle_Tyco | ANT2 |
| 1 | AP2114H-3.3 | libcms:SOT223 | U2 |
| 1 | CONN_01X02 | myconnectors:PWR_3A | P5 |
| 1 | D_Schottky_x2_ACom_KKA | mysmd:SOT23 | D3 |
| 1 | Linkit_Smart_7688 | mymods:DIP36-1 | U1 |
| 1 | MIC29302 | mysmd:TO-252 | U8 |
| 1 | PANSTAMPLOGO | mymods:PANSTAMPLOGO | G*** |
| 1 | PANSTAMP_NRG2 | mysmd:PANSTAMP_2 | PS2 |
| 1 | SIM800L_module | mymods:SIM800L_MODULE | U6 |
The 41 most common of 43 parts.
More from panStamp/kicad
12- 4 layers33.1 × 64.7 mm

- 2 layers121.9 × 86 mm

- 4 layers81 × 76 mm

- 2 layers113 × 180 mm

- 4 layers33.1 × 64.7 mm

- 2 layers91.9 × 86 mm

- 4 layers81 × 76 mm

- 4 layers75 × 95 mm

- 4 layers50.1 × 70.1 mm

- 4 layers55 × 40 mm

- 4 layers25.4 × 55.8 mm

- 4 layers25.4 × 56.6 mm

Similar boards
- 2 layers60 × 70 mm

MC60
wyolum/MC60
break out board for Quectel MC60 Ultra-small LCC Quad-band GSM/GPRS/GNSS Module
109 parts17 - 2 layers118.5 × 94.5 mm

WaveLab24GHz
PA0MHE/Wavelab-24G-Addon-module
Can be used as addon module for the Wavelab 23X1008XP module, which was available during the 2021-2022 timeframe on www.ebay.pl seller:bisonelectronics-sp2jyr The module converts the first-IF 2364MHz to 432MHz (or…
207 parts5MIT - 4 layers313 × 206 mm

OverHead v1
stefanofinetti/MF_OverHead_Panel
Complete project for the Airbus A319/320/321/330 OverHead Panel
416 parts5GPL-3.0 - 2 layers121.9 × 49.5 mm

- 2 layers100 × 99.9 mm

- 4 layers48.3 × 85.1 mm

- 2 layers45 × 172 mm

Ph portable refrigerator v2 hw
Blackcastus/ESP32_A7670
To make it easy for you to get started with GitLab, here's a list of recommended next steps.
188 parts - 2 layers90 × 90 mm

Questions
How big is the Cb linkit PCB?
It measures 81 × 76 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cb linkit use?
43 parts, built around the MIC29302WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cb linkit KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is cb-linkit/cb-linkit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cb linkit design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).