

Esp.io
Kicad projects
- Size
- 91.9 × 86 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 60
- Pads
- 188
- Tracks, vias
- 651, 114
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Esp.io is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 91.9 × 86 mm with 67 parts on 60 nets, routed with 651 tracks and 114 vias.
It is built around the ESP-12E and LTV-847. Its parts include 20 resistors, 9 diodes, 7 ICs, 5 connectors and 4 capacitors. It belongs with the ESP8266 boards of this library.
Main components
2ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesLTV-847
DIP-16-30℃~+110℃ 1.2V 100mV@20mA,1mA 200mW 35V 3us 4 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor DIP-16 Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | mysmd:SM0603S | R1, R11, R13, R21, R22, R23, R24, R25 |
| 4 | 1k | mysmd:SM0603S | R16, R17, R18, R19 |
| 4 | 1k5 | SM0603S | R2, R3, R4, R5 |
| 4 | 2k2 | SM0603S | R6, R7, R8, R9 |
| 4 | CONN_01X02 | myconnectors:terminal_block_5mm_2P | P2, P3, P4, P5 |
| 4 | CONN_3 | terminal_block_5mm_3P | BIN1, BIN2, BIN3, BIN4 |
| 4 | DIODE | SOD323 | D7, D8, D9, D10 |
| 4 | LED | SM0603S_POL | D3, D4, D5, D6 |
| 4 | NPN | SOT23EBC | Q1, Q2, Q3, Q4 |
| 4 | P*** | 1pin | 1PIN, 1PIN, 1PIN, 1PIN |
| 4 | SONGLE_RELAY_10A | SONGLE_RELAY_10A | U3, U4, U5, U6 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_PUSH_SMALL | switch-tact-noah | SW1, SW2 |
| 2 | VAL** | mymods:fiducial | fiducial, fiducial |
| 1 | 100n | SM0603S | C4 |
| 1 | 1u | SM0603S | C3 |
| 1 | 22u | SMDCPOL_5 | C2 |
| 1 | 47u | SMDCPOL_6.3 | C1 |
| 1 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | PROG0 |
| 1 | CONN_2 | terminal_block_5mm_2P | P1 |
| 1 | D_Schottky_x2_ACom_KKA | mysmd:SOT23 | D1 |
| 1 | ESP-12E | ESP8266:ESP-12E | U1 |
| 1 | FUSE | libcms:SM1206 | F1 |
| 1 | LTV-847 | mysmd:DIP16_SMD | U8 |
| 1 | PANSTAMPLOGO | PANSTAMPLOGO | G*** |
| 1 | THERMISTOR | mysmd:SM0603S | TH1 |
| 1 | UA78M33 | SOT223 | U2 |
More from panStamp/kicad
12- 4 layers33.1 × 64.7 mm

- 2 layers121.9 × 86 mm

- 4 layers81 × 76 mm

- 2 layers113 × 180 mm

- 4 layers33.1 × 64.7 mm

- 4 layers81 × 76 mm

- 4 layers81 × 76 mm

- 4 layers75 × 95 mm

- 4 layers50.1 × 70.1 mm

- 4 layers55 × 40 mm

- 4 layers25.4 × 55.8 mm

- 4 layers25.4 × 56.6 mm

Similar boards
- 2 layers160 × 100 mm

MPCNC Nano Estlcam Shield
tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam
96 parts70 - 2 layers83.8 × 120.7 mm

Atu100wifi
ftl/atu100wifi
A wifi adapter device for David Fainitski's ATU-100 antenna tuner (https://github.com/Dfinitski/N7DDC-ATU-100-mini-and-extended-boards)
31 parts28MIT - 2 layers101.6 × 79 mm

FunctiongeneratorMK3Frequency
pstimpel/waveformgenerator
A waveform generator based on XR2206 and Arduino
43 parts14 - 2 layers63 × 80 mm

- 2 layers155 × 108 mm

- 2 layers320 × 81.3 mm

Display and controls board
411568/Atmega8_FM_radio
Simple FM radio based on Atmega8 and TEA5767 module
103 parts3MIT - 4 layers157.5 × 130 mm

Jv thesis
JhonVelasquez/Embedded_system_Synchronize_Plant
Project of a embedded system that synchronizes signals in a plant. There is electronic (PCB) and software design (FreeRTOS for STM32F7).
233 parts2 - 2 layers228.6 × 152.4 mm

Questions
How big is the Esp.io PCB?
It measures 91.9 × 86 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp.io use?
67 parts, built around the ESP-12E and LTV-847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp.io KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is esp-io/esp.io.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp.io design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).