4 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19
2 layers100 × 82 mm
Simulator
OpenLogicEFI/Hardware19Hardware is based off an open source project called Speeduino by Josh Stewart.
- Size
- 100 × 82 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 102
- Pads
- 299
- Tracks, vias
- 346, 83
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Mar 2020
- Updated
- 19 Oct 2026
Overview
Simulator is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 100 × 82 mm with 79 parts on 102 nets, routed with 346 tracks and 83 vias.
It is built around the ZMM5V6 and B5819W. Its parts include 32 resistors, 24 diodes, 10 connectors, 2 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdOpenLogicEFI
Formerly: DetonationEMS
OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"
License
All designs are released under the TAPR Open Hardware License v1.0
Documentation
-
The Official Speeduino Manual, documents and discord are the best places to start.
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R17, R18, R19, R20, R24, R25, R26, R28 +9 |
| 3 | 0r | Resistor_SMD:R_0805_2012Metric | R29, R31, R32 |
| 3 | 470r | Resistor_SMD:R_0603_1608Metric | R21, R23, R27 |
| 2 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J5, J6 |
| 2 | EL357NB_TA_-G | Detonation:SOP254P700X200-4N | IC1, IC2 |
| 2 | ZMM5V6 | Diode_SMD:D_MiniMELF | D3, D4 |
| 1 | 100r | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 12v | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D1 |
| 1 | CKP PU | Detonation:1x02-Proto | J9 |
| 1 | CLT | Misc:RV09AF4020KB10K | POT2 |
| 1 | CMP PU | Detonation:1x02-Proto | J10 |
| 1 | Conn_01x03 | Detonation:3-PinSwitch | J8 |
| 1 | Conn_01x03 | Detonation:PinSocket 2x03 | J7 |
| 1 | Conn_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J2 |
| 1 | Conn_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-16-3.5-H_1x16_P3.50mm_Horizontal | J3 |
| 1 | Conn_01x10 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-12-3.5-H_1x12_P3.50mm_Horizontal | J4 |
| 1 | Conn_02x20_Counter_Clockwise | Connector_Automotive:IDC-Header_2x20_P2.54mm_Vertical_Speeduino | J1 |
| 1 | FAN | LED_SMD:LED_0603_1608Metric | LED17 |
| 1 | FP | LED_SMD:LED_0603_1608Metric | LED18 |
| 1 | IAT | Misc:RV09AF4020KB10K | POT1 |
| 1 | IGN1 | LED_SMD:LED_0603_1608Metric | LED9 |
| 1 | IGN2 | LED_SMD:LED_0603_1608Metric | LED10 |
| 1 | IGN3 | LED_SMD:LED_0603_1608Metric | LED11 |
| 1 | IGN4 | LED_SMD:LED_0603_1608Metric | LED12 |
| 1 | IGN5 | LED_SMD:LED_0603_1608Metric | LED13 |
| 1 | IGN6 | LED_SMD:LED_0603_1608Metric | LED14 |
| 1 | IGN7 | LED_SMD:LED_0603_1608Metric | LED15 |
| 1 | INJ1 | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | INJ2 | LED_SMD:LED_0603_1608Metric | LED2 |
| 1 | INJ3 | LED_SMD:LED_0603_1608Metric | LED3 |
| 1 | INJ4 | LED_SMD:LED_0603_1608Metric | LED4 |
| 1 | INJ5 | LED_SMD:LED_0603_1608Metric | LED5 |
| 1 | INJ6 | LED_SMD:LED_0603_1608Metric | LED6 |
| 1 | INJ7 | LED_SMD:LED_0603_1608Metric | LED7 |
| 1 | INJ8 | LED_SMD:LED_0603_1608Metric | LED8 |
| 1 | Logo_Open_Hardware_Small | Detonation-Logos:SpeeduinoCompatible-17mm | G2 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | G3 |
| 1 | Logo_Open_Hardware_Small | Detonation-Logos:Design by 30mm | G1 |
| 1 | MAP/SP1 | Misc:RV09AF4020KB10K | POT3 |
| 1 | RPM | Misc:RV09AF4020KB10K | POT6 |
| 1 | SP1- | LED_SMD:LED_0603_1608Metric | LED19 |
| 1 | SP2- | LED_SMD:LED_0603_1608Metric | LED20 |
| 1 | Switch | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1 |
| 1 | TPS | Misc:RV09AF4020KB10K | POT4 |
| 1 | locked | LED_SMD:LED_0603_1608Metric | LED16 |
| 1 | o2 | Misc:RV09AF4020KB10K | POT5 |
Questions
How big is the Simulator PCB?
It measures 100 × 82 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simulator use?
79 parts, built around the ZMM5V6 and B5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simulator KiCad files?
From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Engine Simulation/8 Channel/RevB/Simulator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simulator design in my own project?
Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.
More from OpenLogicEFI/Hardware
12- 2 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
223 parts19 - 2 layers98.8 × 69.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
167 parts19 - 2 layers100 × 99.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 4 layers98.8 × 69.8 mm
SparkGapX4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 2 layers98.8 × 69.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
159 parts19 - 2 layers100 × 100 mm
1.3e
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
157 parts19 - 2 layers100 × 99.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
152 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
142 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
141 parts19 - 2 layers100 × 100 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
136 parts19 - 2 layers98.2 × 53.3 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
104 parts19
Similar boards
- 4 layers189.4 × 59.1 mm
- 2 layers99.1 × 59.7 mm
LaserHarp3 - Rev3.1
amonbenson/laserharp
Setup a virtual environment and install the dependencies:
134 parts1 - 2 layers98 × 36.2 mm
- 4 layers
STM32F405RGT6-Breakout
MURPHYENGINEERING/STM32F405RGT6-Breakout
Following along with Phil's Lab: https://www.youtube.com/watch?v=t5phi3nT8OU
62 parts1 - 2 layers93 × 57 mm
Tea Cozy Hotplate
Will946/TeaCupHotPlate
Keeps your tea at temperature by turning the circuit board itself into the heating element. Overengineered, like all good tea rituals.
140 parts1MIT - 2 layers100 × 150 mm
PCB Kicad F446
axvelo/PCB-Kicad-F446
A custom CNC control interface board designed with KiCad 9.0, intended for use with LinuxCNC and the Remora STM32F446 / W5500 firmware real-time firmware.
202 partsCERN-OHL-S-2.0 - 2 layers160 × 160 mm
- 2 layers155 × 75 mm
Hacklock-2137
p-durlej/hswaw-hscloud
Controller board for next gen hacklock door / lock / access control system.
119 parts