Skip to the content
2 layers100 × 100 mmPre Ignition, the printed circuit board in 3D

Hardware is based off an open source project called Speeduino by Josh Stewart.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
136
Nets
245
Pads
595
Tracks, vias
750, 144
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Mar 2020
Updated
19 Oct 2026

Overview

Pre Ignition is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 100 × 100 mm with 136 parts on 245 nets, routed with 750 tracks and 144 vias.

It is built around the TC4427EOA, SRV05-4-P-T7 and L7805CDT, with the ULN2003A, 1N4148WS and AO3400A among its other parts. Its parts include 59 resistors, 29 capacitors, 11 diodes, 8 ICs and 8 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

6

README

README.md

Website

OpenLogicEFI

Formerly: DetonationEMS

OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"

License

All designs are released under the TAPR Open Hardware License v1.0

Documentation

Parts

136
QtyValueFootprintReferences
141kResistor_SMD:R_0603_1608MetricR3, R4, R11, R12, R19, R20, R23, R24, R28, R30, R31, R40, R56, R58
12100KResistor_SMD:R_0603_1608MetricR1, R2, R9, R10, R17, R18, R21, R22, R47, R49, R51, R53
11100nFCapacitor_SMD:C_0603_1608MetricC4, C5, C10, C11, C17, C18, C19, C22, C23, C26, C27
9470Resistor_SMD:R_0603_1608MetricR25, R32, R33, R38, R39, R42, R43, R44, R45
8220nFCapacitor_SMD:C_0603_1608MetricC14, C15, C20, C21, C24, C25, C28, C29
62.4kResistor_SMD:R_0603_1608MetricR5, R6, R13, R14, R35, R36
51N4148WSDiode_SMD:D_SOD-323FD2, D3, D4, D5, D8
5LEDLED_SMD:LED_0603_1608MetricD6, LED1, LED2, LED3, LED4
4120Resistor_SMD:R_0603_1608MetricR48, R50, R52, R54
422Resistor_SMD:R_0805_2012MetricR7, R8, R15, R16
4AO3400APackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
4SRV05-4-P-T7Package_TO_SOT_SMD:SOT-23-6U3, U4, U5, U6
4STP62NS04ZPackage_TO_SOT_THT:TO-220-3_VerticalQ5, Q6, Q7, Q8
210kResistor_SMD:R_0603_1608MetricR46, R57
210nFCapacitor_SMD:C_0603_1608MetricC16, C31
21uFCapacitor_SMD:C_0603_1608MetricC6, C13
22.49kResistor_SMD:R_0603_1608MetricR37, R41
2220Resistor_SMD:R_0603_1608MetricR34, R61
247pFCapacitor_SMD:C_0603_1608MetricC30, C33
251kResistor_SMD:R_0603_1608MetricR26, R27
2Conn_02x16_Counter_ClockwiseDetonation:PROTO-3X16J3, J6
2PullupDetonation:1x02-ProtoJP4, JP5
2TC4427Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U2
2VR/DIRECTMisc:3x1-GPIOJP2, JP3
110uFCapacitor_THT:CP_Radial_Tantal_D5.0mm_P2.50mmC1
12kResistor_SMD:R_0603_1608MetricR59
13.9kResistor_SMD:R_0603_1608MetricR29
1330nFCapacitor_SMD:C_0603_1608MetricC2
14.7nFCapacitor_SMD:C_0603_1608MetricC9
147uFCapacitor_SMD:C_1206_3216MetricC3
1Arduino_Mega2560_Shield-ArduinoMyLibs:Arduino_Mega2560_Shield_IO_Only_No_Silk_ScreenXA1
1Conn_01x04Detonation:1X4-PROTOJ2
1Conn_02x10_Counter_ClockwiseDetonation:Molex_Micro-Fit_3.0_43045-2000_2x10_P3.00mm_HorizontalJ7
1Conn_02x12_Counter_ClockwiseDetonation:Molex_Micro-Fit_3.0_43045-2400_2x12_P3.00mm_HorizontalJ5
1Ignition VoltageDetonation:3-PinSwitchJP1
1Jumper_3_Bridged12Detonation:3-PinSwitchJP7
1L7805CDTDetonation:TO-252-2-Thermal-PadIC1
1Logo_Open_Hardware_SmallDetonation:Pre-IgnitionX4-30mmG5
1Logo_Open_Hardware_SmallSymbol:OSHW-Logo2_14.6x12mm_SilkScreenG6
1Logo_Open_Hardware_SmallDetonation-Logos:Design by DetonationEMSG3
1Logo_Open_Hardware_SmallDetonation:SpeeduinoCompatible-21mmG4
1Logo_Open_Hardware_SmallDetonation:TireSmoke-22mmG2
1M7Diode_SMD:D_SMAD1
1MOVDetonation:MOVRV1
1MapSensor_Pressure:Freescale_98ARH99066AMap1
1Pololu_Breakout_DRV8825Module:Pololu_Breakout-16_15.2x20.3mmA1
1ULN2003APackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU7
1VR_HeaderDetonation:Socket_VRConditionerJ4

More from OpenLogicEFI/Hardware

12
  • 4 layers115.5 × 96.2 mmClosed deck x4, the printed circuit board in 3D

    Closed deck x4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    245 parts19
  • 2 layers115.5 × 96.2 mmClosed deck x4, the printed circuit board in 3D

    Closed deck x4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    223 parts19
  • 2 layers98.8 × 69.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    167 parts19
  • 2 layers100 × 99.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 4 layers98.8 × 69.8 mmSparkGapX4, the printed circuit board in 3D

    SparkGapX4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 2 layers98.8 × 69.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    159 parts19
  • 2 layers100 × 100 mm1.3e, the printed circuit board in 3D

    1.3e

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    157 parts19
  • 2 layers100 × 99.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    152 parts19
  • 2 layers100 × 100 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    142 parts19
  • 2 layers100 × 100 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    141 parts19
  • 2 layers98.2 × 53.3 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    104 parts19
  • 2 layers98.2 × 53.3 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    102 parts19

Similar boards

  • 2 layers182.5 × 165 mmDigital inputs, the printed circuit board in 3D

    Digital inputs

    rusefi/stim

    GPIO: output: x4 address pins output: x4 test control pins output: mux off

    182 parts
  • 4 layers109.2 × 64.5 mmMin evolver, the printed circuit board in 3D

    Min evolver

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    72 parts12
  • 2 layers50.8 × 50.8 mmSAIL 1 0, the printed circuit board in 3D

    SAIL 1 0

    UND-ARC/Nasa-SLI-2024

    47 parts1MIT
  • 2 layers148 × 86.7 mmTune button panel, the printed circuit board in 3D

    Tune button panel

    EdgeCoil/tune-button

    BLE remote (ESP32-C3) that likes or playlists the current Spotify song through a companion Android app. Firmware, app, protocol and three PCBs: XIAO, four-key and JST-button.

    246 parts
  • 2 layers150 × 68 mmController, the printed circuit board in 3D

    Controller

    candykingdom/firefly2

    Small blinkenlight boards that sync up using radios

    194 parts5
  • 4 layers86.3 × 97.1 mmHellen-112-17, the printed circuit board in 3D

    Hellen-112-17

    rusefi/hellen-112-17

    128 parts4
  • 4 layers41 × 149 mmAir filter controller, the printed circuit board in 3D

    Air filter controller

    ademuri/air-filter-controller

    The ESP32-S3 uses 3.3V. I want onboard indicator LEDs, and the option to have offboard LEDs as well. Using addressable WS2812-type LEDs is flexible. These need a 5V supply.

    167 parts1

Questions

How big is the Pre Ignition PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pre Ignition use?

136 parts, built around the TC4427EOA, SRV05-4-P-T7, L7805CDT and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pre Ignition KiCad files?

From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Engine Managment/Pre-Ignition/Pre-Ignition x4/MX4B-2/Pre_Ignition.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pre Ignition design in my own project?

Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.