
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

Hardware is based off an open source project called Speeduino by Josh Stewart.
Pre Ignition is an open-source printed circuit board by OpenLogicEFI, from the OpenLogicEFI/Hardware repository on GitHub. It is a 2-layer board of 98.8 × 69.8 mm with 159 parts on 174 nets, routed with 882 tracks and 349 vias.
It is built around the TC4424EPA, CH340N and KP234XTMA1, with the SRV05-4-P-T7, 74LVC1G157GW,125 and LM2940S-5.0 among its other parts. Its parts include 58 resistors, 43 capacitors, 12 ICs, 11 transistors and 9 diodes.
Formerly: DetonationEMS
OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"
All designs are released under the TAPR Open Hardware License v1.0
The Official Speeduino Manual, documents and discord are the best places to start.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Capacitor_SMD:C_0402_1005Metric | C12, C14, C17, C18, C21, C23, C25, C26, C27, C28, C30, C34, C36, C37, C38, C39 +3 |
| 17 | 470r | Resistor_SMD:R_0402_1005Metric | R13, R15, R16, R29, R30, R31, R32, R39, R40, R41, R42, R49, R50, R52, R53, R54 +1 |
| 11 | 100k | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8, R9, R10, R14, R22, R26, R27, R28 |
| 11 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R11, R20, R21, R23, R24, R25, R43, R44, R45, R47 |
| 11 | 220nF | Capacitor_SMD:C_0402_1005Metric | C3, C11, C15, C19, C20, C22, C24, C29, C31, C33, C35 |
| 7 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q7, Q8, Q9, Q10, Q11 |
| 5 | TestPoint | Detonation:TestPoint_THT_D0.6mm_Drill0.3mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C13, C16, C41, C42 |
| 4 | 22 | Resistor_SMD:R_0805_2012Metric | R33, R34, R35, R36 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | IGN1, IGN2, IGN3, IGN4 |
| 4 | STP75N04Z | Package_TO_SOT_THT:TO-220-3_Vertical | Q3, Q4, Q5, Q6 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R18, R19, R48 |
| 3 | 10nF | Capacitor_SMD:C_0402_1005Metric | C2, C8, C9 |
| 3 | FET Bypass | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP5 |
| 3 | SM4007PL | Diode_SMD:D_SOD-123F | D5, D6, D7 |
| 3 | SRV05-4-P-T7 | Package_TO_SOT_SMD:SOT-23-6 | U5, U6, U8 |
| 2 | 2.49k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R59, R60 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R12, R46 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R57, R58 |
| 2 | 51k | Resistor_SMD:R_0402_1005Metric | R37, R51 |
| 2 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D4, D8 |
| 2 | Conn_01x04 | Detonation:1X4-PROTO-NoSilk | J3, J4 |
| 2 | DIRECT/VR | Detonation:1x03-Proto | JP3, JP4 |
| 2 | TC4424 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H | C6 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 120r | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D9 |
| 1 | 1k | Resistor_SMD:R_Array_Concave_4x0603 | RN1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 2.2uF | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 2.4k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 3.9k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 470nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 47pF | Capacitor_SMD:C_0402_1005Metric | C32 |
| 1 | 74LVC1G157GW,125 | Detonation:SOP65P210X110-6N | IC2 |
| 1 | CH340N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | DRV8825_Module | Detonation:DVR8825-Labeled-Front | A1 |
| 1 | KP234XTMA1 | Detonation:KP234 | IC3 |
| 1 | LM2940 | Package_TO_SOT_THT:TO-220-3_Vertical | IC1 |
| 1 | LOGO | Detonation-Logos:DCWerx-19mm | G*** |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | G2 |
| 1 | Logo_Open_Hardware_Small | Detonation-Logos:SpeeduinoCompatible-14mm | G1 |
| 1 | M7 | Diode_SMD:D_SMA | D2 |
| 1 | MPXHZ6400 | Detonation:MPXH6250 | IC4 |
| 1 | MX23A40NF1 | Detonation:MX23A40NF1 | J1 |
| 1 | Mega_Pro_VinPinsUnpopulated | Detonation:Arduino_Mega_Mini_2560_SmallCrtYd_NoVin | U2 |
| 1 | Reset Control | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | S1 |
| 1 | SMBJ30CA | Diode_SMD:D_SMB | D1 |
| 1 | SMF6V0CA | Diode_SMD:D_SOD-123F | D3 |
| 1 | SolderJumper_3_Open | Detonation:SolderJumper-3-OPEN | JP6 |
| 1 | ULN2003ADR | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | USB-S0 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J5 |
| 1 | VR_Header | Detonation:Socket_VRConditioner_Corrected | J2 |

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

Maverick765/miatuino
まずはアクセルを完全に戻した状態で[Closed throttle ADC Count]の右の[Get Current]をクリックして、スロットル全閉時の値を取得します。 次に、アクセルを完全に踏み込んだ状態で[Full throttle ADC Count]の右の[Get Current]をクリックして、スロットル前回時の値を取得します。 完了したら[Accept]をクリックします。







ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator
It measures 98.8 × 69.8 mm and has 2 copper layers, 1.6 mm thick.
159 parts, built around the TC4424EPA, CH340N, KP234XTMA1 and SRV05-4-P-T7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenLogicEFI/Hardware repository on GitHub, at the commit this page was made from: the board is Engine Managment/Spark Gap/Spark Gap X4/RevA/Pre_Ignition.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OpenLogicEFI before reusing the design.