4 layers100 × 80 mm
4 layers100 × 60.9 mm
Drv board
chopin1998/vechicle_pcb- Size
- 100 × 60.9 mm
- Copper layers
- 4
- Thickness
- 1.2 mm
- Parts
- 149
- Nets
- 101
- Pads
- 571
- Tracks, vias
- 957, 351
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jun 2020
- Updated
- 14 Jun 2020
Overview
Drv board is an open-source printed circuit board by chopin1998, from the chopin1998/vechicle_pcb repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 100 × 60.9 mm with 149 parts on 101 nets, routed with 957 tracks and 351 vias.
It is built around the MP6612DGF, MP8715DN and AMS1117-3.3V, with the INA138NA, ME6239A33M3G and PESD2CAN,215-JSM among its other parts. Its parts include 55 capacitors, 33 resistors, 15 diodes, 12 ICs and 11 connectors. It belongs with the STM32 boards of this library.
Main components
12MP6612DGF
TSSOP-20_L6.5-W4.4-P0.65-EP-LS6.4TSSOP-20 Motor Driver ICs ROHSMonolithic Power SystemsMotor Driver ICsMP8715DN
SOIC8ESOIC8E New Arrivals ROHSMonolithic Power SystemsUncategorised
AMS1117-3.3V
SOT-223-20℃~+85℃ 1 1.2A 1.5V@(800mA) 15V 3.3V 5mA Fixed Positive Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
INA138NA
SOT23-52.7V-36V, High-Side Measurement Current Shunt MonitorTexas InstrumentsUncategorised
ME6239A33M3G
SOT-23-40℃~+150℃ 1 1.5uA 250mA 3.3V 30V 380mV@(100mA) Fixed Positive Short Circuit Protection SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPESD2CAN,215-JSM
SOT-23100nA 17pF 2 230W@8/20us 24V 30.5V 4A@8/20us 60V Bidirectional ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSJSMSEMIUncategorisedAO3400
SOT-23-55℃~+150℃ 1 N-channel 1.05nF 1.4V 1.5W 28mΩ@10V 30V 5.8A 77pF N-Channel SOT-23 MOSFETs ROHSGOODWORKMOSFETs
SM4007PL
SOD-123FL-55℃~+150℃ 1.1V@1A 10uA@1kV 1A 1kV 25A Independent SOD-123FL Diodes - General Purpose ROHSMDDDiodes - General Purpose
WS2813C
SMD5050-6P0.6mA 1.65mm 2kHz 5mm 800Kbit/s B:65mcd、R:280mcd、G:500mcd R:620nm~630nm、G:510nm~525nm、B:460nm~475nm 集成智能反向连接保护功能 SMD5050-6P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
APS07A30M4R7
SMD32.5mΩ 4.7uH 6.06A 6.5A ±20% SMD Power Inductors ROHSCOILANK INTERNATIONALPower Inductors
APS07A30M8R2
SMD,7.7x6.6mm5.05A 59.5mΩ 6A 8.2uH ±20% SMD,7.7x6.6mm Power Inductors ROHSCOILANK INTERNATIONALPower Inductors
BSZ097N04LSG
TSDSON-8FL-55℃~+150℃ 1 N-channel 1.9nF 16pF 24nC@10V 2V 35W 40A 40V 450pF 9.7mΩ@10V TSDSON-8FL MOSFETs ROHSInfineon TechnologiesMOSFETs
Parts
149| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C10, C12, C17, C19, C21, C23, C26, C27, C28, C33, C34, C38, C39 +10 |
| 14 | 10n | Capacitor_SMD:C_0402_1005Metric | C20, C25, C29, C30, C35, C36, C37, C40, C41, C46, C47, C48, C49, C52 |
| 7 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R5, R6, R9, R17, R23, R33 |
| 6 | 22u/25v | Capacitor_SMD:C_0805_2012Metric | C18, C24, C31, C32, C42, C43 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 47k | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R18, R19 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C6, C13, C14, C15 |
| 4 | 2k7 | Resistor_SMD:R_0402_1005Metric | R1, R7, R8, R14 |
| 4 | 4k7 | Resistor_SMD:R_0402_1005Metric | R27, R28, R31, R32 |
| 4 | Conn_02x04_Counter_Clockwise | Connector_JST:JST_PHD_B8B-PHDSS_2x04_P2.00mm_Vertical | J9, J10, J11, J12 |
| 4 | DNP | Resistor_SMD:R_0201_0603Metric | R25, R26, R29, R30 |
| 4 | MP6612D | Package_SO:ETSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3x4.2mm | U9, U10, U11, U12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 4 | PESD2CAN_215 | Package_TO_SOT_SMD:SOT-23 | D11, D12, D13, D14 |
| 3 | 10R | Resistor_SMD:R_0402_1005Metric | R3, R4, R10 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C16, C22 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 470R | Resistor_SMD:R_0402_1005Metric | R15, R22 |
| 2 | AO3400 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3 |
| 2 | MP8715 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm | U5, U7 |
| 2 | SM4007PL | Diode_SMD:D_SOD-123F | D4, D5 |
| 2 | WS2813 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D6, D7 |
| 2 | White | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 1 | 0.01R | Resistor_SMD:R_2512_6332Metric | R20 |
| 1 | 10k 0.5% | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 8Mhz | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 8k2 | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | AMS1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | APS07A30M4R7 | Inductor_SMD:L_7.3x7.3_H3.5 | L3 |
| 1 | APS07A30M8R2 | Inductor_SMD:L_7.3x7.3_H3.5 | L2 |
| 1 | BSZ097N04LS | Package_TO_SOT_SMD:TDSON-8-1 | Q2 |
| 1 | Conn_01x02_Male | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Conn_01x02_Male | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J4 |
| 1 | Conn_01x02_Male | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J7 |
| 1 | Conn_01x03_Male | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | Conn_01x04_Male | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J8 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123F | D15 |
| 1 | D_TVS | Diode_SMD:D_SMA | D9 |
| 1 | FIO_LOGOV2 | Symbol:KiCad-Logo2_5mm_SilkScreen | LOGO2 |
| 1 | FIO_LOGOV2 | Symbol:ESD-Logo_6.6x6mm_SilkScreen | LOGO3 |
| 1 | INA138 | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | Jumper_NO_Small | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | JP1 |
| 1 | LM5050-1 | Package_TO_SOT_SMD:TSOT-23-6 | U6 |
| 1 | ME6239A33M3G | Package_TO_SOT_SMD:TSOT-23 | U4 |
| 1 | MOMENTARY-SWITCH-SPST-2-SMD-5.2MM | sparkfun_switch:TACTILE_SWITCH_SMD_5.2MM | S2 |
| 1 | OSHW-LOGOL | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO1 |
| 1 | Orange | LED_SMD:LED_0603_1608Metric | D10 |
| 1 | PS1240P02CT3 | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | SHT3x-DIS | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.5mm | U2 |
| 1 | SRV05-4-P-T7 | digikey-footprints:SOT23-6L | D1 |
| 1 | STM32F303RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J2 |
Similar boards
- 2 layers45 × 25 mm
Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
41 parts599 - 2 layers78 × 103 mm
Embedded.old
borisg912/3DNA
This project creates a flat cylindrical DNA model with: - Magnetic DNA bases with color-coded NeoPixel LEDs and unique resistor values for identification - Interactive base pairing game that validates correct DNA base…
121 parts2GPL-3.0 - 4 layers100 × 70 mm
SEM
Serhio4522/SEM_hitachi-
Digitization of a Hitachi scanning electron microscope (SEM) — hardware design, FPGA firmware, and analog frontend schematics.
288 parts1 - 2 layers98.8 × 69.8 mm
Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
159 parts19 - 4 layers168.2 × 82.9 mm
2024 def con badge v1
RetiaLLC/DefconBadge2026
Retia 2024 DEF CON badge (ESP32-S3): docs, pinouts, flashable firmware incl. DOOM and Meshtastic, examples, KiCad hardware sources
104 parts8 - 2 layers76 × 65 mm
- 2 layers266.7 × 95.2 mm
Riemann
agausmann/riemann-kb-pre1
Riemann: A 60% pseudo-split ortholinear keyboard.
285 partsCC-BY-SA-4.0
Questions
How big is the Drv board PCB?
It measures 100 × 60.9 mm and has 4 copper layers, 1.2 mm thick.
What parts does the Drv board use?
149 parts, built around the MP6612DGF, MP8715DN, AMS1117-3.3V and INA138NA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Drv board KiCad files?
From the chopin1998/vechicle_pcb repository on GitHub, at the commit this page was made from: the board is drv_board/drv_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Drv board design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).