Skip to the content
2 layers266.7 × 95.2 mmRiemann, the printed circuit board in 3D

Riemann: A 60% pseudo-split ortholinear keyboard.

Size
266.7 × 95.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
285
Nets
238
Pads
1,202
Tracks, vias
1,263, 191
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Nov 2021
Updated
15 Nov 2021

Overview

Riemann is an open-source printed circuit board by agausmann, from the agausmann/riemann-kb-pre1 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 266.7 × 95.2 mm with 285 parts on 238 nets, routed with 1,263 tracks and 191 vias.

It is built around the 74LVC2T45DC, MIC94093YC6-TR and BB-2020BGR-TRB, with the PS1240P02CT3 among its other parts. Its parts include 122 diodes, 70 capacitors, 62 switches, 22 resistors and 4 ICs. It belongs with the keyboards and input boards and the SAM D and SAM boards of this library.

Main components

4

README

README.md

Riemann

A pseudo-split 60% ortholinear keyboard.

PCB Design

Main Features

  • 60 keys in a 5x12 grid

  • Supports MX-style switches

  • Per-key RGB

  • Hot-swappable

  • QMK support (TODO)

Design

  • Designed with the features that I want, with no compromises.

  • Designed to be factory-assembled, not hand-soldered (I want to be able to rely on this, and I don't trust my soldering skills that much).

  • Microcontroller is selected to be compatible with the Rust programming language (unfortunately it does not have good support for AVR)

  • PRETTY COLORS (RGB LEDs are based on the APA102 IC for that sweet, sweet dynamic range, compared to WS2812)

Parts

285
QtyValueFootprintReferences
65100nFCapacitor_SMD:C_0402_1005MetricC10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +49
601N4148Diode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44
60BB-2020BGR=custom-footprints:LED-BB-2020BGRLED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +44
60Keyswitch=custom-footprints:SW_GateronRGB_KailhSocket_1.00u_PCBSW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +44
1510kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R16, R17
2100nFCapacitor_SMD:C_0603_1608MetricC2, C3
2330Resistor_SMD:R_0603_1608MetricR14, R15
2470Resistor_SMD:R_0603_1608MetricR21, R22
25.1kResistor_SMD:R_0603_1608MetricR18, R19
110uFCapacitor_SMD:C_0805_2012MetricC4
11kResistor_SMD:R_0402_1005MetricR20
11uFCapacitor_SMD:C_0402_1005MetricC1
122uFCapacitor_SMD:C_0805_2012MetricC5
1500mAFuse:Fuse_0805_2012Metric_CastellatedF1
174LVC2T45DCPackage_SO:VSSOP-8_2.3x2mm_P0.5mmU4
1ASTMHT-48.000MHzOscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mmX1
1ATSAMD21G15A-APackage_QFP:TQFP-48_7x7mm_P0.5mmU3
1AZ1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1Cortex Debug=custom-footprints:Samtec_FTSH-105_2x05_P1.27mm_Keyed_VerticalJ1
1DFUButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW2
1IND1LED_SMD:LED_0603_1608MetricLED61
1IND2LED_SMD:LED_0603_1608MetricLED62
1MIC94093YC6Package_TO_SOT_SMD:SOT-363_SC-70-6U2
1PS1240P02CT3Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mmBZ1
1ResetButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW1
1USB-C=custom-footprints:USB_C_Receptacle_GCT_USB4105J2

Similar boards

  • 4 layers127 × 76.2 mmPayload pcb, the printed circuit board in 3D

    Payload pcb

    austindriggs/urc-payload-pcb

    All-purpose control and interface board designed to manage mission-critical sensors and electronics for University Rover Challenge at WVU.

    114 partsMIT
  • 4 layers81 × 15 mmOwts, the printed circuit board in 3D

    Owts

    Monash-BoSL/BoSLcam

    Hardware repository for the BoSLcam, IoT camera.

    49 parts
  • 4 layers42.7 × 23.7 mmMR ESC MCXA AM32, the printed circuit board in 3D

    MR ESC MCXA AM32

    NXP-Robotics/MR-ESC-AM32

    Open Drone hardware design using NXP MCXA MCU running AM32 software - KiCAD

    97 parts9
  • 4 layers48 × 44.5 mmSmol servo rpi2350-tmc6200, the printed circuit board in 3D

    Smol servo rpi2350-tmc6200

    dognotdog/smol_servo

    circuitry and software for controlling NEMA17 size brushless motors and stepper motors as servos.

    151 parts5
  • 2 layers50 × 40 mmTwokey, the printed circuit board in 3D

    Twokey

    ianthongchai/twokey

    19 partsMIT
  • 4 layers168.2 × 82.9 mm2024 def con badge v1, the printed circuit board in 3D

    2024 def con badge v1

    RetiaLLC/DefconBadge2026

    Retia 2024 DEF CON badge (ESP32-S3): docs, pinouts, flashable firmware incl. DOOM and Meshtastic, examples, KiCad hardware sources

    104 parts8
  • 2 layers76 × 65 mmPioupiou v0, the printed circuit board in 3D

    Pioupiou v0

    pioupiou-archive/pioupiou-v0

    Fichiers sources pour la balise Pioupiou version 0

    41 parts4

Questions

How big is the Riemann PCB?

It measures 266.7 × 95.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Riemann use?

285 parts, built around the 74LVC2T45DC, MIC94093YC6-TR, BB-2020BGR-TRB and PS1240P02CT3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Riemann KiCad files?

From the agausmann/riemann-kb-pre1 repository on GitHub, at the commit this page was made from: the board is pcb/riemann.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Riemann design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).