2 layers160 × 100 mm
INA138NA
Texas Instruments
2.7V-36V, High-Side Measurement Current Shunt Monitor
ti/INA138NA
- Category
- Uncategorised
- Package
- SOT23-5
- Pins
- 5
Overview
The INA138NA is an uncategorised made by Texas Instruments in a SOT23-5 package with 5 pins. 2.7V-36V, High-Side Measurement Current Shunt Monitor.
PCBKit's library has its KiCad symbol (Amplifier_Current:INA138, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 14 open-source boards in 13 repositories on GitHub use it.
Symbol
Footprint
Pinout
5| Pin | Name | Type |
|---|---|---|
| 1 | — | Output |
| 2 | GND | Power in |
| 3 | + | Input |
| 4 | - | Input |
| 5 | V+ | Power in |
Open-source boards using it
All 14- 4 layers150 × 50 mm
- 2 layers236.9 × 86.8 mm
- 2 layers100 × 50 mm
Power Supply
adsehgal/Bench_Power_Supply
A design for a custom bench top power supply for prototyping.
106 parts2 - 2 layers304.3 × 274 mm
Robotont electronics mainboard
robotont/robotont-electronics-mainboard
Unified pcb design for the 3rd generation robotont robot.
426 parts1 - 2 layers98.6 × 49.8 mm
Sch
SL-RU/svelotracker
Device for bicycle. It will show current position, track, speed, compass, direction to the destination or to start. It can save the track and etc
106 parts1 - 4 layers100 × 60.9 mm
- 4 layers190.5 × 127 mm
Pbv2 mass test adapter active
kkrizka/powerboard_mass_test_adapter_active
Active Part of the Mass Test Board for ITk Strips PowerBoard
290 parts
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/ti/INA138NA" title="INA138NA in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ti/INA138NA.jpg" alt="INA138NA" width="1200" height="900">[](https://pcbkit.io/parts/ti/INA138NA)Questions
Is there a KiCad symbol and footprint for the INA138NA?
Yes. The symbol is Amplifier_Current:INA138 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the INA138NA?
SOT23-5, with 5 pins. Its footprint is drawn on this page.
What can replace the INA138NA?
Parts like it in the library: the TPAP2125K-3.3TRG1 by TECH PUBLIC, the 4A2D by TECH PUBLIC, the TPS7A0233DBV by Texas Instruments and the APX823-29W5G by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the INA138NA?
14 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
TPAP2125K-3.3TRG1
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICUncategorised4A2D
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICUncategorisedTPS7A0233DBV
SOT23-5-40℃~+125℃@(Tj) 1 130uVrms 200mA 25nA 270mV@(200mA) 3.3V 55dB@(1kHz) 6V Fixed Over Current Protection、Over Temperature Protection、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsUncategorisedAPX823-29W5G
SOT-25-5-40℃~+85℃@(TA) 1 1.1V~5.5V 2.93V 200ms 30uA Active Low Open-drain Voltage monitor Watchdog timer、Manual reset input SOT-25-5 Supervisor and Reset ICs ROHSDiodes IncorporatedUncategorisedRT9193-33GB-JSM
SOT-23-5-20℃~+60℃@(Ta) 1 25uA 3.3V 300mA 35mV@(10mA)、280mV@(100mA) 75dB@(1kHz) 7V Enable control Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIUncategorisedTPL710F33-5TR
SOT-23-5-40℃~+125℃ 1 1.4uA 170mV@(200mA) 200mA 3.3V 55dB@(100Hz) 6V 90uVrms Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS3PEAKUncategorisedTPV6823V-TR
SOT-23-5-40℃~+125℃@(Tj) 1 1.58V 1V~5.5V 200ms 6uA Active Low Push-pull Voltage Monitor Yes Yes SOT-23-5 Supervisor and Reset ICs ROHS3PEAKUncategorisedHG24C64CM5/TR
SOT-23-5UncategorisedHGSEMI