Skip to the content
12

SMBJ30CA

DOWOExtended

-55℃~+150℃ 12.4A 1uA 30V 33.3V 48.4V 600W@10/1000us Bidirectional TVS SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHS

Part id
dowo/SMBJ30CA
Category
ESD And Surge Protection (TVS, ESD)
Package
SMB(DO-214AA)
Pins
2
In stock
261,432 at JLCPCB (C284101)
Used on
23 open-source boards

Overview

The SMBJ30CA is an ESD And Surge Protection made by DOWO in a SMB(DO-214AA) package with 2 pins. -55℃~+150℃ 12.4A 1uA 30V 33.3V 48.4V 600W@10/1000us Bidirectional TVS SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 261,432 are in stock at JLCPCB (part C284101). 23 open-source boards in 23 repositories on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

12
Diode_SMD:D_SMBFrom KiCad's library

Pinout

2
The pins of the SMBJ30CA
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

23See all 23
  • 4 layers106 × 63.5 mmBrineomatic, the printed circuit board in 3D

    Brineomatic

    hoeken/brineomatic

    Open Source Watermaker Controller.

    323 parts47LGPL-2.1
  • 4 layers85 × 56 mmAnthC, the printed circuit board in 3D

    AnthC

    Anthilla/AnthC

    Anthilla AnthC Board

    211 parts40
  • 2 layers170 × 140 mmLibreVerter Controller, the printed circuit board in 3D

    LibreVerter Controller

    imendizabal/LibreVerter

    Open Source Power Converter - Hardware Components

    215 parts22
  • 2 layers140 × 90 mmPicoIndustrial, the printed circuit board in 3D

    PicoIndustrial

    feecat/PicoIndustrial

    Industrial Control Module Based on RPI PICO

    163 parts14GPL-3.0
  • 4 layers144 × 127 mmFrothfet, the printed circuit board in 3D

    Frothfet

    hoeken/frothfet

    Yarrboard load controller board with current sense, volt sense, fuses, and sender support.

    394 parts14GPL-3.0
  • 2 layers127 × 71 mmRgb input, the printed circuit board in 3D

    Rgb input

    hoeken/yarrboard-hardware

    Hardware for the Yarrboard open hardware project

    118 parts4GPL-3.0
  • 2 layers48 × 42 mmCan bus kicad, the printed circuit board in 3D

    Can bus kicad

    satspares/ELTEK_With_ESP32

    Control and Display for ELTEK Flatpack2

    25 parts4MIT
  • 4 layers45 × 60 mmHPM5361-RMCS Slave V1.0, the printed circuit board in 3D

    HPM5361-RMCS Slave V1.0

    Kaiser041224/HPM5361-RMCS_Slave-Pro

    HPM5361-RMCSSlave-V1.0 是一个基于 KiCad 9 的硬件工程,核心主控为 HPM5361ICB1。从顶层框图、层级原理图和关键器件选型来看,这块板更像一块面向机器人/运动控制场景的从控板,用于通信汇聚、PWM 外设输出、姿态感知、板载存储和基础人机交互。

    222 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SMBJ30CA?

Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMBJ30CA?

SMB(DO-214AA), with 2 pins. Its footprint is drawn on this page.

Where is the SMBJ30CA datasheet?

DOWO publishes it: the Datasheet link on this page opens it.

Where can I order the SMBJ30CA?

JLCPCB lists it as part C284101, with 261,432 in stock; the sellers' links on this page open their listings.

What can replace the SMBJ30CA?

Parts like it in the library: the SMBJ30A by hongjiacheng, the SMBJ30CA by Liown, the SMBJ30CA by hongjiacheng and the SMBJ30A by MDD. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMBJ30CA?

23 boards in 23 repositories on GitHub; the most starred are listed on this page, with their KiCad files.