
Button pad board
hoeken/yarrboard-hardware
Hardware for the Yarrboard open hardware project

Hardware for the Yarrboard open hardware project
Rgb input is an open-source printed circuit board by hoeken, from the hoeken/yarrboard-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 127 × 71 mm with 118 parts on 97 nets, routed with 809 tracks and 104 vias.
It is built around the ESP32-DEVKITC-VE, MCP3208-BI/P and TLC5947DAP, with the XL1509-5.0, PESD3V3L1BA and BAT54S among its other parts. Its parts include 30 resistors, 23 capacitors, 23 diodes, 4 ICs and 4 connectors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
This repo has Kicad symbols, footprints, and models used in the Yarrboard project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C17, C18, C19, C20, C21, C22 |
| 16 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R7, R9, R11, R13, R15, R17, R19, R20, R21, R24, R25, R26, R27, R28, R29 |
| 11 | PESD3V3L1BA | Diode_SMD:D_SOD-323 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11 |
| 8 | 100k | Resistor_SMD:R_0805_2012Metric | R4, R6, R8, R10, R12, R14, R16, R18 |
| 8 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D12, D13, D18, D19, D20, D21, D22, D23 |
| 8 | ~ | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | INPUT0, INPUT1, INPUT2, INPUT3, INPUT4, INPUT5, INPUT6, INPUT7 |
| 8 | ~ | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | ADC0, ADC1, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7 |
| 8 | ~ | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | RGB0, RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R23 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | SX33L | Diode_SMD:D_SMA | D14, D15 |
| 1 | 100uF/10v | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C16 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 1uF/50v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | 22uF/35v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 3.3k | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | 4.7R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 4.7uF/50v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 470nF/50v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | CBC3225T100KR | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | DSK24 | Diode_SMD:D_SOD-123 | D17 |
| 1 | ESP32-DEVKITC | yarrboard:ESP32-DevKitC | U1 |
| 1 | GZ2012D601TF | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | I2C | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | INPUTS | Connector_FFC-FPC:TE_1-84952-0_1x10-1MP_P1.0mm_Horizontal | J1 |
| 1 | Logo Small | yarrboard:Logo Small | LOGO |
| 1 | MCP3208 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | RGB | Connector_FFC-FPC:TE_3-84952-0_1x30-1MP_P1.0mm_Horizontal | J4 |
| 1 | SMBJ30CA | Diode_SMD:D_SMB | D16 |
| 1 | SMMS0650-680M | Inductor_SMD:L_Chilisin_BMRB00060650 | L2 |
| 1 | TLC5947DAP | Package_SO:HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm_ThermalVias | U4 |
| 1 | XL1509-5.0 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | mSMD050-60V | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | mSMD110 | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F2 |

hoeken/yarrboard-hardware
Hardware for the Yarrboard open hardware project






hatlabs/HALMET-hardware
Hat Labs Marine Engine & Tank interface hardware design files


hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
It measures 127 × 71 mm and has 2 copper layers, 1.6 mm thick.
118 parts, built around the ESP32-DEVKITC-VE, MCP3208-BI/P, TLC5947DAP and XL1509-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hoeken/yarrboard-hardware repository on GitHub, at the commit this page was made from: the board is old/rgb-input/rgb-input.kicad_pcb and its schematic old/button pad board/4x4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).